Netvue Home Cam 2 User manual

Home Cam 2 Quick Guide

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
The antennas used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all
persons and must not be co-located for operating in
conjunction with any other antenna or transmitter.
FCC (USA) 15.9 prohibition against eavesdropping except
IRUWKHRSHUDWLRQVRIODZHQIRUFHPHQWRIĆFHUVFRQGXFWHG
under lawful authority, no person shall use, either directly
or indirectly, a device operated pursuant to the provision
of this part for the purpose of overhearing or recording the
private conversations of other unless such use is
authorized by all of the parties engaging in the
conversation.
FCC ID 2AO8RNI-3341
CE RED
This product can be used across EU member states.
Warning

Drilling Template
Home Cam 2
Screws
X 2
What’s In The Box
Quick Guide
Anchors
X 2
Power Adapter
图
Ejector Pin
Home Cam 2 Quick Guide

Light Sensor
Lens
Infrared LEDs
Camera Structure
Micro SD
Card Slot
Magnetic
Base

Power Port
Speaker
Microphone
Wi-Fi
&RQĆJXUDWLRQ
Button

Read Before Installing
1. Keep Home Cam 2 and all accessories out of reach
of children and pets.
2. Home Cam 2 comes with a power adapter. If you
prefer other power adapters, please make sure
that they allow a DC5V power supply voltage, and
an electric current not less than 1A .
3. Working temperature: -10°C to 50°C (14°F to
122°F)
Working relative humidity: 0-95%
4. Please do not expose the camera lens to direct
sunlight.
Note:
1. Netvue Home Cam 2 only works with 2.4GHz Wi-Fi.
2. Strong lights may interfere with the device’s ability
to scan QR code.
3. Avoid placing the device behind furniture or near
microwaves. Try to keep it within range of your
Wi-Fi signal.

Download Netvue App from App Store or
Google Play. Follow the in-app instruction to
complete the entire set up process.
Set Up With Netvue App

With the magnetic base, Home Cam 2 can be
attached to the surface of any iron, nickel,
cobalt-containing object, such as refrigerator,
ZKLWHERDUGGLVKZDVKHUDQGĆOLQJFDELQHW
Mount Your Home Cam 2
iron, nickel, cobalt
containing object
Put your Home Cam 2 just anywhere you
want-on the wall, under the ceiling, or directly
on the desktop.

Install on the Wall
1. Use the provided drilling template to mark
the position of holes on your wall. Use drill bit
(15/64", 6mm) to drill two holes, and then install
anchors to hold screws.
1
2

2. Install the Mounting Bracket on your wall with
the Screws provided.

2
1
3.Point the hole at the bottom to the nail and
turn it counterclockwise.

100°
4.Now it is all set, you could rotate it 100 degrees
up and down.

Netvue Protect Plan provides optional
advanced features for those with higher
security needs, and each plan supports
multiple devices.
Netvue Protect Plan
Visit my.netvue.com to learn more.
Continuous Video Recording
Event Video Recording
Human Detection
...

www.netvue.com
240 W Whitter Blvd Ste A, La Habra, CA 90631
© 2010-2021 NETVUE, INC
Netvue Web Client
[email protected]
Netvue Forum
in-App Chat
@NetvueTech
1(866)749-0567
Feel free to contact us for additional help