AA Products HX501 BLK User manual

WWW.AAPRODUCTSINC.COM
Instruction Manual
HX501 ( BLK & WHT )
Capactiy Extendable Pick-up Truck Rack With Protective Screen Set

INSTRUCTION MANUAL
AAPRODUCTSINC
For Technical Support Call:1-888-806- 3972 / 626-332-4245
WARNING!
Read, understand and follow all warnings and instructions before using this product. Failure to follow these directions
may result in property damage, serious bodily injury, and/or death. AA Products Inc. is not responsible for any property
damage, personal injury, or death occurred while using any AA-Racks products. Retain these instructions for future
reference.
$Q\PRGLFDWLRQRUXQLQWHQGHGXVHRIWKLVSURGXFWYRLGVDQ\ZDUUDQW\DQGFRXOGFUHDWHDKD]DUGRXVFRQGLWLRQ
/RDGVPXVWEHVHFXUHDFFRUGLQJWRORFDOKHLJKWDQGGHLFDWLRQUHJXODWLRQVDQGRUODZV
Secured loads and connections must be re-checked periodically for tightness.
,QRUGHUWRSUHYHQWLQVWDOODWLRQSUREOHPVDQ\FRQVXOWDWLRQRUXVHRIFHUWLHGLQVWDOOHURULQVWDOODWLRQVHUYLFHFRPSDQ\
is recommended.
Screen x 1
Bolt M10*60 x 4
Clamp x 4
Spring Washer x 2 Foam Pad x 2 Allen-wrench x 1
Hoisting Shackle Assembly x 2
Lock Nut x 4 Bolt M10*45 x 4 Nut (M10 ) x 4
Flange Nut x 2
Model Number: HX501 ( BLK & WHT )
Capactiy Extendable Pick-up Truck Rack With Protective Screen Set
PRODUCT DESCRIPTION
The HX501 Heavy Duty Headache Rack is Cab. Protection Design for pick-up trucks. It’ s powder-coated with weather
UHVLVWLQJSDLQW7KH+;FDQEHDGMXVWHGIURPWRLQFKHVWRWPRVWSLFNXSWUXFNV7KH'LUHFW%ROWRQ&&ODPS
Mounting & Stake Pocket Mounting are the available installation options for customers to select as desired.
PART LIST
en
x
1
Mounting Base(left) x 1 Mounting Base(right) x 1 Washer(M10) x 12
Washer(M12) x 2
2
n-
wr
en
ch
(M

INSTRUCTION MANUAL
AAPRODUCTSINC
For Technical Support Call:1-888-806-3972 / 626-332-4245
INSTALLATION INSTRUCTION
ASSEMBLING THE RACK:
1）Find the Left & Right Mounting Bases; insert them to the bottom of the Screen. Secure with M10*60 Bolt（Note: Do not
tighten the bolts and nuts）2）Put the assembly onto the bed-rail, adjust the mounting bases to set the desired position for installation. Tighten the
M10*60 Bolts from the bottom slots.
MOUNTING INSTALLATIONS:
HX501 provides flexible installations based on different pick-up trucks varied by Make & Models, customers can
freely choose one of the followings depends on the bed-rail structures, feel free to consult us if you need any
assistances.
1. Direct Bolt-on Installation: (Proper uses of Tools are required for installation)
1）According to the pre-drilled holes from the Mounting Bases, mark the drilling spot on the bed-rail. (Remove the
plastic bed-rail cover/cap if needed) Use a Drill to drill holes for the M10*45 Bolt. (Repeat those steps for the other side)
2）Tighten the Nuts to secure the rack. Installation completed.
2. C-Clamp Mounting Installation: (The C-Clamps installation might be limited due to different bed-rail structures varied
from different Make & Models, cutting of bed-liners might be required for C-clamp Mounting installation)
Set position for the mounting points. Ideally, set both mounting points apart for each C-clamps, for the purpose of
applying the mounting forces evenly onto the Mounting Bases. Set the inner (bigger) piece underneath the bed-rail, put
the outer (smaller) piece onto the Mounting Base and screw the bolts on. Tighten the bolt to complete installation.
3. Stake Pocket Mounting Installation: (Only work for pick-up trucks come with Stake Pockets on the bed-rail, this
option might not be available for certain Make & Models even if it comes with stake pockets on the bed-rail)
1）Take out the caps from the stake pockets. Put the pre-assembled rack onto the bedrail, determine if the slot hole
aligned with the stake pockets. (The slot-hole has to be directly on top of the stake pocket, if not, please consider other
installation options)
2）Take off the rack, be very careful. Take the Hoisting Shackle Assembly through the foam pad to forming a Kit, drop
the Kit inside the stake pocket. Pull the bolt to make sure the middle piece is hooking securely from inside.
3）This step needs extra attention. Keep pulling the bolt (may consider use tools like a small plier), slowly screw the
top piece to tighten the Shackle Assembly onto the stake pocket.
4）Put the rack back, apply the Flange Nut & Spring Washer & Washer(M12) and tighten to complete installation.

INSTRUCTION MANUAL
AAPRODUCTSINC
For Technical Support Call:1-888-806-3972 / 626-332-4245
INSTALLATION DIAGRAM
STEP 1
STEP 1
STEP 2
Assembling The Rack:
Mounting Installations:
Direct Bolt-on Installation: (Proper uses of Tools are required for installation)
Bolt M10 * 60 &Lock Nut &
Washer(M10) ( Assembly the
Washers before and after the rack )
Put the assembly onto the bed-rail, adjust the mounting
bases to set the desired position for installation.
Adjustable
Drill two holes through
the guardrail
Bolt M10*45 &Nut(M10) &Washer(M10)
Mark as needed

INSTRUCTION MANUAL
AAPRODUCTSINC
For Technical Support Call:1-888-806-3972 / 626-332-4245
AAP
STEP 1
C-Clamp Mounting Installation: (The C-Clamps installation might be limited due to different bed-rail
structures varied from different Make & Models, cutting of bed-liners might be required for C-clamp
Mounting installation)
1
1
STEP 2
ASSEMBLY
COMPLETION

INSTRUCTION MANUAL
AAPRODUCTSINC
For Technical Support Call:1-888-806-3972 / 626-332-4245
Stake Pocket Mounting Installation: (Only work for pick-up trucks come with Stake Pockets on the
bed-rail, this option might not be available for certain Make & Models even if it comes with stake pockets
on the bed-rail)
STEP 1
STEP 2
STEP 3
Mark as needed
Foam Pad
Hoisting Shackle
Assembly
In the installation process can prevent falling
Stake Pocket inside.
Pull the bolt to make sure the middle piece is hooking securely
from inside
Bed-Rail Bed-Rail
Alignment with the markings
previously made
Tighten to complete installation.
Flange Nut &Spring Washer
&Washer(M12)

INSTRUCTION MANUAL
AAPRODUCTSINC
For Technical Support Call:1-888-806-3972 / 626-332-4245
AA PRODUCTS INC™ WARRANTY
DISCLAIMER OF LIABILITY
AA Products Inc™ will warranty all truck and van products for the life of the product, and all accessories for a period of one years from the date of purchase. Subject to the limitations and
exclusions described in this warranty, AA Products Inc™ will remedy defects in the structural integrity of the product related to materials or workmanship by repairing or replacing, at its
discretion, a defective product without charge for parts or labor. In addition, AA Products Inc™ may elect, at its discretion, not to repair or replace a defective product but rather to issue to
a purchaser a refund equal to the purchase price paid for the product or a credit to be used toward the purchase of a new AA Products Inc™ product.
No warranty is given for defects caused by shipping damage, normal wear and tear, cosmetic discoloration, scratches or chips, road hazards, accidents, unlawful vehicle operations, or
modifications of, or any types of repair of a truck or van rack system other than those authorized by AA Products Inc™.
No warranty is given for defects resulting from conditions beyond AA Product Inc’s control including, but not limited to, misuse, overloading, or failure to assemble, install or use the
product in accordance with AA Products Inc’s written instructions or guidelines included with the product or made available to the purchaser.
No warranty is given for AA Products Inc™ products purchased outside of the United States, Canada, and Mexico.
In the event that a product is defective, the purchaser should contact the AA Products Inc™ Customer Service group in writing: 2235 East Locust Ct., Ontario, CA 91761 Attn: Warranty
Claims. In the event that a product needs to be returned, an AA Products Inc™ Customer Service Representative will provide mailing address and any additional instructions. Please note
that the purchaser will be responsible for the cost of mailing the product to AA Products Inc™ and that proof of purchase in the form of an original purchase invoice or receipt and a
detailed description of the defect must be included in the mailing.
Repair or replacement of a defective product or the issuance of a refund or credit (as determined by AA Products Inc™) is a purchaser’s exclusive remedy under this warranty. Damage to
a purchaser’s vehicle, cargo and/or to any other person or property is excluded. This warranty is expressly made in lieu of any and all other warranties, express or implied, including the
warranties of merchantability and fitness for a particular purpose. AA Products Inc™’s sole liability to any purchaser is limited to the remedy set forth above. In no event will AA Products
Inc™ be liable for any lost profits, lost sales, or for any consequential, direct, indirect, incidental, special, exemplary, or punitive damages or for any other damages of any kind or nature.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not be applicable. This warranty gives you specific legal rights,
and you may also have other rights, which may vary by state, province and country.
ASSEMBLY
DRAWING
S
S
EMBL
Y
DRAWING

WARNINGb
7KLVSURGXFWFDQH[SRVH\RXWRFKHPLFDOVLQFOXGLQJ/HDG%HQ]HQHHWF
which are known to the State of California to cause cancer or birth defects or
other reproductive harm. For more information, visit www.P65warnings.ca.gov
Contact us :
[email protected]
Toll Free:1-888-806-3972
626-332-4245