A&D UC-352BLE User manual

WIRELESS
PREMIUM WEIGHT SCALE
UC-352BLE
Instruction Manual

Contents
Preface E-2
General Information E-2
Safety Information E-3
Wireless Communication Function E-5
Parts Identication E-7
Installing (or replacing) the batteries E-8
Connecting to a mobile device (Pairing) E-9
Setting the Units E-10
Taking a Measurement E-11
Other Functions E-12
Troubleshooting E-14
Maintaining the Scale E-15
Specications E-16
Warranty E-18

E-2
Preface
Congratulations on purchasing a state-of-the-art A&D medical connected scale,
one of the most advanced health scales available today. Designed for ease of use
and accuracy, this device will facilitate your daily weight management regimen. We
recommend that you read through this manual carefully before using the device for
the rst time.
General Information
This scale is intended to be used on a at, hard surface. If using on a soft surface,
such as carpet, it may cause inaccurate measurements.

E-3
Safety Information
The following items contain information to prevent the risk of harm or injury to
yourself or other people. Please read these items carefully and be sure to use this
product correctly.
Danger This symbol indicates an immediate danger which could result in
death or serious injury.
Warning This symbol indicates the possibility of death or serious injury.
Caution This symbol indicates the possibility of physical injury or damage
to property.
Precautions For Use
Warning
• Do not rely on self-diagnosis when attempting weight loss or therpeutic
exercise. Follow the instructions of a physician or specialist.
• Do not step on the edges of the scale or jump on the scale. It may result in
a fall, causing injury.The impact may also cause damage to the scale.
• Do not use the scale on an uneven surface. It may damage the scale. Also,
the scale cannot measure accurately.
• Do not use the scale on a slippery surface or step on the scale with wet
feet. It may result in slipping and injury. Also, the scale cannot measure
accurately.
Caution
• Do not place the scale where it is exposed to excess water or humidity such
as a bathroom, where it is exposed to direct sunlight, where it is exposed
directly to the air outlet of an air conditioning unit, or near re. It may cause
the scale to malfunction.
• This scale should only be used for weighing body weight.
• This scale is precision measuring device. Do not drop the scale, or expose
it to vibration or powerful shocks.

E-4
Safety Information
Caution
• Do not disassemble, repair or modify the scale. It may cause malfunction or
injury.
• Person with disabilityies should be assisted by a caregiver when using this
scale. Failure to do so may result in a fall, causing injury.
• When installing the batteries, be sure that the + (positive) and - (negative)
terminals are correct. Installing incorrectly may cause overheating, battery
uid leaks or rupturing of the batteries, resulting in damage to the scale or
injury.
• This scale is designed for personal use.
• Store this scale out of the reach of small children.
• Do not store this scale vertically. If for any reason this scale is stored
vertically, be sure not to let the scale fall.
• Do not place any items on this scale during storage.
• If use of this scale is shared with a person who has an infectious disease
such as a skin disease on the feet, etc., clean the scale before use. (For
details on cleaning the scale, see “Maintaining the Scale (P.14)”.)
• To accurately measure your weight, use the scale on a at, hard oor. Do
not use on a carpet or other soft surface.

E-5
Wireless Communication Function
This scale uses Bluetooth®wireless connectivity to communicate with a receiver
device. At the end of measurement, the measurement data is sent from this scale
to the receiver device.
Bluetooth®is communication technology that enables devices to communicate
wirelessly. The Bluetooth®word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by A&D is under license. Other
trademarks and trade names are those of their respective owners.
This device complies with Part 15 of FCC rules and contains the FCC ID
VPYLBVZ. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operations.
This device complies with Industry Canada licence-exempt RSS standard(s) and
contains IC 772C-LBVZ. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.
Receiver Device
Use with a device such as mobile device (tablet or smartphone) with an
application to enable Bluetooth®communication. Download and install the app
from Apple or Google.
Precautions For Wireless Functions
Warning
• Do not use in places where wireless communication is prohibited, such
as on airplanes or in hospitals. This scale may have an adverse e󰀨ect on
electronic devices or medical electrical equipment.

E-6
Caution
• If the communication function of this scale is used near a wireless device
that communicates in the 2.4 GHz range, the processing speed of both
devices may decrease. Do not use near a microwave oven where a
magnetic eld, static electricity or radio wave interference may occur.
(The signal may not reach due to environmental reasons.)
Note: A&D cannot accept any reponsibility for any losses incurred such as operating malfunctions or loss of
data that may occur through the use of this scale. This scale is not guaranteed to connect to all Bluetooth®
compatible devices.
Wireless Communication Function

E-7

Components
• Digital Weight Scale
• 4 AAA Batteries
• Instruction Manual
• Quick Start Guide
Scale
Display
Display Symbols
Symbol Name Description
Ready/Stable symbol This symbol is displayed when the
measurement display is stable
Batteries are depleted. Replace all four batteries
Low battery indicator If this symbol is displayed, replace
all four batteries with new ones
Bluetooth®Communication Symbol
Battery compartment
Feet
SMART
Display Set switch
Battery indicator
Stable Symbol
Bluetooth
C
ommunication
S
ymbol
Unit

E-8
Installing (or replacing) the batteries
1. Remove the battery cover on the back of the device.
2. Insert the 4 AAA batteries with the postive (+) and
negative (-) terminals properly aligned with the
corresponding symbols in the battery compartment.
3. Close the battery cover.
Caution
• Install each battery with the positive (+) and negative (-) terminals properly
aligned with the corresponding symbols in the battery compartment.
• Improper installation of the batteries may cause battery leakage.
• Replace all four batteries with new ones, when the symbol is
displayed. Do not mix new and used batteries. It may cause damage to the
scale or shorten the battery life.
• Be sure to use AAA size alkaline batteries. Do not use any other type of
battery.
• Never use rechargeable batteries with this scale.
• The battery life is dependant upon the environmental temperature, battery
type and usage.
• The batteries provided with the device are for testing the scale performance
and may have a limited life.
• Remove the batteries from the battery compartment, when the scale is not
to be used for a long time. Storing the scale with the batteries installed may
result in battery uid leaking from the batteries, causing damage to the
scale. The supplied batteries are for checking operation of the scale and
may have a short lifespan.

E-9
Connecting to a mobile device (Pairing)
This scale needs to be registered with a receiver in order to use Bluetooth®
communication with the receiver. The process of registering this scale with a
receiver is known as pairing. When pairing is completed, measurement data from
this scale is automatically sent to the paired device each time a measurement is
made when the receiver is in the state in which it can receive transmissions.
Consult the receiver instruction manual and set it to enable pairing. If the receiver
has a “pairing wizard”, use the wizard to complete pairing. Place the receiver and
this scale as close as possible to carry out pairing.
1. Install four AAA size alkaline batteries into this scale.
• For details, see “Installing (or replacing) the batteries” on page E-8.
2. Conrm that the scale is turned o󰀨, and press and hold
the set switch.
• When the set switch is continuously pressed, “Pr” is
displayed.
3. Release the set switch when “Pr” is displayed.
• “ ” ashes.
• This scale is discoverable by the receiver.
• Pairing can be skipped press the set switch when
“Pr” is displayed.
4. Start pairing on the receiver.
• Follow the pairing instructions for the receiver to
search for, select and pair with this scale.
5. Conrm that “End” is displayed.
Once paired, changing batteries should not require
re-pairing.
Beep
Beep beep

E-10
Caution for Pairing
• Turn the power of other Bluetooth®devices o󰀨 when performing pairing.
• If measurement data cannot be received, try pairing again. After pairing is
complete, all communications are done automatically if the receiver is in the
receivable state.
• In the unlikely event that this scale causes radio wave interference to
another wireless station, either change the location where the scale is used
or stop using the scale immediately.
Setting the Units
1. Conrm that the scale is turned o󰀨, and press the set switch.
2. Press the set switch to select the unit that you want to set.
• The unit changes each time the set switch is pressed.
• Wait for 3 seconds after setting the unit.
3. Conrm that “End” is displayed.
• The settings are saved.
• After three seconds of non-operation, the scale
conrms the selected unit with two beeps, displays
“End ” and automatically turns o󰀨.
4. If you to wish to delete any readings stored in memory
press the set switch. Changing the units format will delete
any stored readings on the scale.
Note: To see readings stored in memory they must be transferred to your
mobile device and displayed in the app.
Beep
selected unit with two beeps, displays “End ” and automatically
Beep beep
k
g
lb
lb
Connecting to a mobile device (Pairing)

E-11
Taking a Measurement
Step On
1. Conrm that the scale is turned o󰀨, and step on the
scale gently.
• Measurement starts when you step on the scale.
• A progress bar is displayed during measurement.
Stand up straight and remain as still as possible
during measurement.
2. Step o󰀨 the scale when “StEP” and “oFF” are
alternately displayed with three beeps.
• If you do not step o󰀨, the scale beeps every two
seconds.
• The scale turns o󰀨 automatically after 2 minutes.
• All display segments are indicated when you step
o󰀨 the scale.
• Do not touch the scale while all display segments
are displayed. It may cause misreading.
3. Conrm the measurement results.
• The scale turns o󰀨 automatically 60 seconds after
the measurement results are displayed.
• Data is automatically sent to the receiver if the
receiver is in the receivable state.
• If the scale is not paired with a receiver, the data
is stored in the scale memory. (See “Transmitting
Temporarily Stored Data”.)
• Data stored in the scale memory cannot be viewed
on this scale.
• You can also shut the power o󰀨 by pressing the set switch.
• The most recent readings will be shown on the screen.
SMART
SMART
Beep
k
+
-
lb
g
lb
Beep beep beep

E-12
Other Functions
󰀨
The scale has an “Automatic power-o󰀨” function. After the measurement results are
displayed for 60 seconds, the scale is automatically turned o󰀨.
Transmitting Temporarily Stored Data
If measurement data cannot be sent to a receiver, this scale can temporarily store
data of a maximum of 90 measurements in the built-in memory. When the scale
is able to transmit to a receiver, all of the data is transmitted. If the amount of data
temporarily stored exceeds 90 measurements, the oldest data is deleted and
replaced with new data.
• Stored data cannot be viewed on this scale.
• The amount of data that can be temporarily stored may vary with the application.
Bluetooth® Transmission
This product is equipped with a Bluetooth®wireless function and can connect to the
following Bluetooth®devices.
• iPhone, iPad, iPod ( iPhone 4S or later )
• Applications and devices that are compatible with Bluetooth LE
Each device needs an application to receive data. For connection methods, refer to
the manual for each device.
To connect with your mobile device - download and install the “A&D Heart Track”
app. Follow the instructions in the app to connect.

E-13
Other Functions
Ensuring a good connection
• Ensure the space between this scale and the receiver is unobstructed. The
communication distance may be shortened due to the building construction or
other obstructions. In particular, communication may not be possible through
reinforced concrete walls, etc.
• Do not use the Bluetooth®connection near a wireless LAN or other wireless
equipment, near devices that emit electro-magnetic waves such as microwave
ovens, locations that have a large number of obstructions, or other poor
environments for radio waves. It may cause the connection to be frequently
interrupted, communication speeds to drop substantially, and errors to occur.
• If the scale does not communicate properly when used near a wireless device or
broadcast station, change the location where it is used.
Caution
• The communication distance between this scale and the receiver is
approximately 32 feet or 10 meters. This distance may become shorter due
to the surrounding environment; therefore check that the distance is close
enough for data to be transmitted after the measurement.
Time Settings
This scale has a built-in clock. The date and time of measurement are included in
the measurement data. The clock is synced with the clock in the mobile device.
There is no need to set the clock on the scale.

E-14
Troubleshooting
Error Prompt
Error Corrective Action
Remove and reinstall the batteries. Or replace
all four batteries with new AAA size alkaline
batteries.
Nothing is displayed when
the setting switch is pressed
The measurement results
are greatly di󰀨erent from the
expected values.
Place the scale on a solid level surface.
Remove any foreign objects that might be
touching the bottom of the scale.
“E” is displayed Exceeds the maximum capacity (450lb/200kg).
“E-0” is displayed Exceeds the maximum capacity (450lb/200kg).
“Err” is displayed Exceeds the maximum capacity (450lb/200kg).
“E-10” is displayed
Communication error.
Remove and reinstall the batteries.
“E-11” is displayed

E-15
Maintaining the Scale
• If the scale becomes dirty, soak a cloth in water or mild detergent, wring the cloth
out thoroughly and then wipe the scale clean.
• After wiping away the dirt with the damp cloth, dry the scale using a soft, dry
cloth.
• Never use alcohol, benzene, thinner or other harsh chemicals to clean the scale.
• Remove the batteries from the battery compartment, when the scale is not going
to be used for a long time.

E-16


Product Name UC-352BLE
Maximum Capacity 450 lb / 200 kg
Minimum Resolution
0 to 220 lb with an increment of 0.2 lb
220 to 450lb with an increment of 0.5 lb
0 to100 kg with an increment of 0.1 kg
100 to 200 kg with an increment of 0.2 kg
Wireless
Communication
VZ(MURATA Manufacturing Co.Ltd.) Bluetooth®
Ver.4.0LE
Setting Units Units: lb or kg
Power Source 4 AAA size alkaline batteries
Battery Life Approx. 1 year (two measurements per day when
alkaline batteries are used)
Dimensions (WxDxH) 11.8 x 11.8 x 1.2” (300 x 300 x 31 mm)
Weight 4.7 lb (2.1kg) including batteries
Accessories 1 Instruction Manual
4 “AAA” Batteries
1 Quick Start Guide

E-17
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modications not expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the equipment. This transmitter
must not be co-located or operated in conjunction with any other antenna or trans-
mitter. This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines as this equipment has very low levels of RF energy. But it is desirable
that it should be installed and operated keeping the radiator at least 20cm or more
away from person’s body.
Industry Canada
Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
Note: This equipment has been tested and found to comply with Industry Canada
rules as a Bluetooth®device modular approval spread/spectrum/digital device
(2400-2483.5 MHz under IC ID 772C-LBVZ.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o󰀨 and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di󰀨erent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help


E-18
Warranty
LIMITED WARRANTY
A&D Medical (“A&D”)
For purchasers within the US only:
Product Consumer Warranty Term
UC-352BLE 2 Years
Limited Warranty:
A&D Medical (“A&D”) warrants to the rst purchaser (“You”) that the A&D product
You purchased (the “Product”) will be free from defects in material, workmanship
and design for the applicable Warranty Term stated above from the date You
purchased the Product under normal use. This Limited Warranty is personal
to You and is not transferable. If the Product is defective, then You return the
Product to A&D in accordance with the procedure set forth below. A&D’s warranty
obligation is limited to the repair or replacement, at A&D’s option, of the defective
Product that has been returned by You within the warranty period. Such repair or
replacement will be at no charge to You. The repaired or replacement Product is
warranted here-under for the longer of the remainder of the original warranty period
or 90 days from the date of shipment of the repaired or replacement Product.
To obtain a warranty service, please contact us in US at 1-888-726-9966 or in
Canada at 1-800-461-0991 for return address, shipping and handling fee, and
other instructions for processing warranty. Please ensure you have satisfactory
proof of the date of Your purchase and a description of the defect. Returns will not
be accepted unless a Return Material Authorization (RMA) Number has been issued
from A&D Customer Service Representative.
This Limited Warranty does not cover, and A&D will not be liable for (i) any shipment
damage, (ii) any dam-age or defect due to misuse, abuse, failure to use reasonable
care, failure to follow written instructions enclosed with the Product, accident,
subjecting the Product to any voltage other than the specied voltage, improper
environmental conditions, or modication, alteration or repair by anyone other
than A&D or persons authorized by A&D, or (iii) expendable or consumable
components.

E-19
Warranty
THIS LIMITED WARRANTY IS THE ONLY WARRANTY PROVIDED BY A&D;
THERE ARE NO OTHER EXPRESS WARRANTIES. If A&D cannot reasonably
repair or replace the Product, A&D will refund the amount You paid for the Product
(not including taxes), less a reasonable charge for usage. To receive a refund you
must have returned the Product and all associated materials to A&D. The above
remedy of repair, replacement or refund is your only and exclusive remedy. IN NO
EVENT SHALL A&D BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOST PROFITS, LOST INFORMATION OR REPLACEMENT
COSTS, ARISING OUT OF YOUR USE OF OR INABILITY TO USE THE
PRODUCT, INCLUDING, WITHOUT LIMITATION, ANY SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES, EVEN IF A&D HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Some states do not allow the exclusion of
incidental or consequential damages, so that the above exclusions may not apply
to you. This warranty gives you specic legal rights, and you may also have other
rights that may vary from state to state.
No distributor, dealer or other party is authorized to make any warranty on behalf
of A&D or to modify this warranty, or to assume for A&D any liability with respect to
its products.