AAT KDH-KZ6000FR-IP User manual

Temperature Measurement&
Face Recognition Terminal
Quick Start Guide
Microphone
18-pin
Interface
Power
Interface
34.2mm
Package Overview
12
Plastic Plug ×4
Tapping Screw×4
IR Temperature
Measurement Module
Infrared
Light
Display
Screen
Speaker
Micro SD
Card Slot
Reset
USB Port
138.6mm
301.8mm
14 15 16 17
D0 D1 GND BUT
+12V
GND
10 11 12 13
IN1 GND IN2 GND
2CH alarm input
Power Input
12V0
PE
GND
IN1
GND
Cable Connection
3
18-pin Interface
1 2 3 4 5 6 7 8 9
NO2 NO1 NO3COM2 COM1 COM3 NC3 D+
RS 485
D-
2CH alarm output Lock interface
18
GND
D0
GND
D1
+
+
+
+
+
+
-
-
-
-
-
-
RS485+
RS485-
Anode
/
Magnetic
Lock
Cathode
Lock
D0
D1
GND
NC3
COM3
NO3
IN2
GND
COM1
NO1
COM2
NO2
D+
D-
BUT
GND
About This Manual
All pictures, images, icons and snapshots in this manual are for reference only. If there is inconsistency
between the manual and the actual product, the actual product shall prevail. The manual will be updated
according to the product improvement and are subject to change without prior written notice.
Legal Disclaimer
To the maximum extent permitted by applicable law, the product described, with its hardware,
software, software and firmware, is provided “as is”, with all faults and errors, and our company
makes no warranties, express or implied, including particular purpose, and non-infringement of
third party. In no event will our company, offices, or agents be liable to you for any special,
consequential, incidental, or indirect damages, including, among others, damages for loss of
business profits, business interruption, or loss of data or documentation, in connection with the use
of this product, even if our company has been advised of the possibility of such damages.
With regard to the product with internet access, the use of product shall be wholly at your own risks.
Our company shall be irresponsible for abnormal operation, privacy leakage or other damages
resulting from cyber attack, hacker attack, virus inspection, or other internet security risks; however,
our company will provide timely technical support if necessary.
During the use of the device, pleas strictly abide by applicable law. In the event of any conflicts
between this manual and the applicable law, the later prevails.
Installation and Use
Please use our product according to the following safety instructions and warnings.
Do not place the camera in extremely hot, cold, dusty or damp location.
Do not expose it to high electromagnetic radiation.
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not be responsible for any problems
caused by unauthorized repair or maintenance.)
Do not drop the camera or subject it to physical shock.
Keep away from liquid while in use.
Do not touch the screen with sharp objects.
If cleaning is necessary, please use clean cloth to wipe it gently, avoiding water or alcohol.
Device Quick Start Guide CD
Drill Template Bracket
Front Back
Left Right
White Fill
Light
Cameras
Wiegand interface Exit Button
Connector
Alarm Input1
Alarm
Output1
Alarm Input2
Alarm
Output2
RS 485
Wiegand
Interface
Lock
Exit Button
Earth
Alarm Input Device
Alarm Input Device
Alarm Output Device
Access Control Security Module
Alarm Output Device
Power
Power
Power
Power
Card
Reader
Exit Button
Router
Switch
Or
Note:
* The wiegand terminal here is a wiegand input terminal. If you want to connect
to an access controller, you shall set the Wiegand direction to “Output”.
* The RS 485 interface of this device supports security module access. Once the security
module is enabled, the exit button and lock control will be invalid.
Temperature Measurement&
Face Recognition Terminal
Quick Start Guide
Microphone
18-pin
Interface
Power
Interface
34.2mm
Package Overview
12
Plastic Plug ×4
Tapping Screw×4
IR Temperature
Measurement Module
Infrared
Light
Display
Screen
Speaker
Micro SD
Card Slot
Reset
USB Port
138.6mm
301.8mm
14 15 16 17
D0 D1 GND BUT
+12V
GND
10 11 12 13
IN1 GND IN2 GND
2CH alarm input
Power Input
12V0
PE
GND
IN1
GND
Cable Connection
3
18-pin Interface
1 2 3 4 5 6 7 8 9
NO2 NO1 NO3COM2 COM1 COM3 NC3 D+
RS 485
D-
2CH alarm output Lock interface
18
GND
D0
GND
D1
+
+
+
+
+
+
-
-
-
-
-
-
RS485+
RS485-
Anode
/
Magnetic
Lock
Cathode
Lock
D0
D1
GND
NC3
COM3
NO3
IN2
GND
COM1
NO1
COM2
NO2
D+
D-
BUT
GND
About This Manual
All pictures, images, icons and snapshots in this manual are for reference only. If there is inconsistency
between the manual and the actual product, the actual product shall prevail. The manual will be updated
according to the product improvement and are subject to change without prior written notice.
Legal Disclaimer
To the maximum extent permitted by applicable law, the product described, with its hardware,
software, software and firmware, is provided “as is”, with all faults and errors, and our company
makes no warranties, express or implied, including particular purpose, and non-infringement of
third party. In no event will our company, offices, or agents be liable to you for any special,
consequential, incidental, or indirect damages, including, among others, damages for loss of
business profits, business interruption, or loss of data or documentation, in connection with the use
of this product, even if our company has been advised of the possibility of such damages.
With regard to the product with internet access, the use of product shall be wholly at your own risks.
Our company shall be irresponsible for abnormal operation, privacy leakage or other damages
resulting from cyber attack, hacker attack, virus inspection, or other internet security risks; however,
our company will provide timely technical support if necessary.
During the use of the device, pleas strictly abide by applicable law. In the event of any conflicts
between this manual and the applicable law, the later prevails.
Installation and Use
Please use our product according to the following safety instructions and warnings.
Do not place the camera in extremely hot, cold, dusty or damp location.
Do not expose it to high electromagnetic radiation.
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not be responsible for any problems
caused by unauthorized repair or maintenance.)
Do not drop the camera or subject it to physical shock.
Keep away from liquid while in use.
Do not touch the screen with sharp objects.
If cleaning is necessary, please use clean cloth to wipe it gently, avoiding water or alcohol.
Device Quick Start Guide CD
Drill Template Bracket
Front Back
Left Right
White Fill
Light
Cameras
Wiegand interface Exit Button
Connector
Alarm Input1
Alarm
Output1
Alarm Input2
Alarm
Output2
RS 485
Wiegand
Interface
Lock
Exit Button
Earth
Alarm Input Device
Alarm Input Device
Alarm Output Device
Access Control Security Module
Alarm Output Device
Power
Power
Power
Power
Card
Reader
Exit Button
Router
Switch
Or
Note:
* The wiegand terminal here is a wiegand input terminal. If you want to connect
to an access controller, you shall set the Wiegand direction to “Output”.
* The RS 485 interface of this device supports security module access. Once the security
module is enabled, the exit button and lock control will be invalid.
Temperature Measurement&
Face Recognition Terminal
Quick Start Guide
Microphone
18-pin
Interface
Power
Interface
34.2mm
Package Overview
12
Plastic Plug ×4
Tapping Screw×4
IR Temperature
Measurement Module
Infrared
Light
Display
Screen
Speaker
Micro SD
Card Slot
Reset
USB Port
138.6mm
301.8mm
14 15 16 17
D0 D1 GND BUT
+12V
GND
10 11 12 13
IN1 GND IN2 GND
2CH alarm input
Power Input
12V0
PE
GND
IN1
GND
Cable Connection
3
18-pin Interface
1 2 3 4 5 6 7 8 9
NO2 NO1 NO3COM2 COM1 COM3 NC3 D+
RS 485
D-
2CH alarm output Lock interface
18
GND
D0
GND
D1
+
+
+
+
+
+
-
-
-
-
-
-
RS485+
RS485-
Anode
/
Magnetic
Lock
Cathode
Lock
D0
D1
GND
NC3
COM3
NO3
IN2
GND
COM1
NO1
COM2
NO2
D+
D-
BUT
GND
About This Manual
All pictures, images, icons and snapshots in this manual are for reference only. If there is inconsistency
between the manual and the actual product, the actual product shall prevail. The manual will be updated
according to the product improvement and are subject to change without prior written notice.
Legal Disclaimer
To the maximum extent permitted by applicable law, the product described, with its hardware,
software, software and firmware, is provided “as is”, with all faults and errors, and our company
makes no warranties, express or implied, including particular purpose, and non-infringement of
third party. In no event will our company, offices, or agents be liable to you for any special,
consequential, incidental, or indirect damages, including, among others, damages for loss of
business profits, business interruption, or loss of data or documentation, in connection with the use
of this product, even if our company has been advised of the possibility of such damages.
With regard to the product with internet access, the use of product shall be wholly at your own risks.
Our company shall be irresponsible for abnormal operation, privacy leakage or other damages
resulting from cyber attack, hacker attack, virus inspection, or other internet security risks; however,
our company will provide timely technical support if necessary.
During the use of the device, pleas strictly abide by applicable law. In the event of any conflicts
between this manual and the applicable law, the later prevails.
Installation and Use
Please use our product according to the following safety instructions and warnings.
Do not place the camera in extremely hot, cold, dusty or damp location.
Do not expose it to high electromagnetic radiation.
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not be responsible for any problems
caused by unauthorized repair or maintenance.)
Do not drop the camera or subject it to physical shock.
Keep away from liquid while in use.
Do not touch the screen with sharp objects.
If cleaning is necessary, please use clean cloth to wipe it gently, avoiding water or alcohol.
Device Quick Start Guide CD
Drill Template Bracket
Front Back
Left Right
White Fill
Light
Cameras
Wiegand interface Exit Button
Connector
Alarm Input1
Alarm
Output1
Alarm Input2
Alarm
Output2
RS 485
Wiegand
Interface
Lock
Exit Button
Earth
Alarm Input Device
Alarm Input Device
Alarm Output Device
Access Control Security Module
Alarm Output Device
Power
Power
Power
Power
Card
Reader
Exit Button
Router
Switch
Or
Note:
* The wiegand terminal here is a wiegand input terminal. If you want to connect
to an access controller, you shall set the Wiegand direction to “Output”.
* The RS 485 interface of this device supports security module access. Once the security
module is enabled, the exit button and lock control will be invalid.
AAT HOLDING S.A.
MANUFACTURER AND SUPPLIER OF ELECTRONIC SYSTEMS
www.aat.pl

Other manuals for KDH-KZ6000FR-IP
1
Other AAT Touch Terminal manuals
Popular Touch Terminal manuals by other brands

Thrane&Thrane
Thrane&Thrane Explorer 300 Getting started guide

EpiValley
EpiValley SXT-4080 Technical manual

Hypercom
Hypercom T7 series Quick reference guide

PIONEERPOS
PIONEERPOS Magnus XV-2 Specifications

Festo
Festo Compact Performance CPV GE-IP-8 Series Brief description

Festo
Festo CPV GE-ASI-8E8A-Z-M8-CE Series Brief description