ABB D0401 User manual

2TMD041800D0088 │30.10.2019
Product manual
ABB-Welcome IP
D0401. Smart Access Point
D0401.-02 Smart Access Point

Table of contents
Product manual 2TMD041800D0088 │
2
Tableo fcontents
1 Notes on the instruction manual....................................................................................................................5
2 Safety.............................................................................................................................................................5
3 Intended use..................................................................................................................................................5
3.1 Typical application..............................................................................................................................6
4 Environment...................................................................................................................................................8
4.1 ABB devices.......................................................................................................................................8
5 Product description........................................................................................................................................9
6 Technical data .............................................................................................................................................11
7 Mounting/Installation....................................................................................................................................12
7.1 Requirement for the electrician........................................................................................................12
7.2 Mounting...........................................................................................................................................13
8 Commissioning............................................................................................................................................15
8.1 Registering an account on the MyBuildings portal..........................................................................15
8.2 Access SmartAP..............................................................................................................................16
8.2.1 Access SmartAP through UPnP.....................................................................................................16
8.2.2 Access SmartAP through AP mode...............................................................................................17
8.3 Initial setup.......................................................................................................................................20
8.4 Home screen....................................................................................................................................32
8.4.1 Configuration screen ......................................................................................................................32
8.5 Settings ............................................................................................................................................34
8.5.1 Access quick settings.....................................................................................................................34
8.5.2 Access general settings .................................................................................................................35
8.5.3 Version information ........................................................................................................................36
8.5.4 Disclaimer information....................................................................................................................37
8.5.5 Language........................................................................................................................................38
8.5.6 Time settings..................................................................................................................................39
8.5.7 Network settings.............................................................................................................................42
8.5.8 AP mode settings ...........................................................................................................................43
8.5.9 Third part authority settings............................................................................................................44
8.5.10 Abnormal devices...........................................................................................................................45
8.5.11 Onvif IPC settings...........................................................................................................................46
8.5.12 Alarm notification settings ..............................................................................................................50
8.5.13 MyBuildings settings.......................................................................................................................51
8.5.14 Project backup................................................................................................................................53
8.5.15 Restore to default settings..............................................................................................................56
8.5.16 Firmware update of SmartAP.........................................................................................................58
8.5.17 Reset the password for the first admin...........................................................................................59
9 Operation.....................................................................................................................................................61
9.1 Device management........................................................................................................................61
9.1.1 Adding DES devices.......................................................................................................................61
9.1.2 Adding VideoControl devices.........................................................................................................65
9.1.3 Configure indoor stations ...............................................................................................................66

Table of contents
Product manual 2TMD041800D0088 │
3
9.1.4 Configure outdoor stations.............................................................................................................72
9.1.5 Configure guard unit.......................................................................................................................83
9.1.6 Configure IP actuator .....................................................................................................................85
9.1.7 Configure IPC.................................................................................................................................90
9.1.8 Configure devices in batch.............................................................................................................93
9.1.9 Removing devices..........................................................................................................................95
9.2 User management............................................................................................................................96
9.2.1 Enter the settings............................................................................................................................96
9.2.2 Adding users...................................................................................................................................97
9.2.3 Configuring users ...........................................................................................................................98
9.2.4 Removing users..............................................................................................................................99
9.2.5 Adding a user group.................................................................................................................... 100
9.2.6 Configuring a user group............................................................................................................. 101
9.2.7 Removing a user group............................................................................................................... 102
9.2.8 Assigning the users to a user group............................................................................................ 103
9.2.9 Removing the users from a user group....................................................................................... 104
9.2.10 Assigning ID authentications to a user........................................................................................ 105
9.2.11 Removing ID authentications from a user................................................................................... 108
9.2.12 Assigning the locks to a user ...................................................................................................... 109
9.2.13 Assigning the locks to a user group............................................................................................ 110
9.2.14 Removing the locks from a user.................................................................................................. 111
9.2.15 Removing the locks from a user group....................................................................................... 112
9.2.16 Pairing APP to a user.................................................................................................................. 113
9.2.17 Removing APP from a user......................................................................................................... 118
9.3 Creating actions.............................................................................................................................119
9.3.1 Enter the settings......................................................................................................................... 119
9.3.2 Creating a new action.................................................................................................................. 120
9.3.3 Configuring the action ................................................................................................................. 122
9.3.4 Removing the action.................................................................................................................... 123
9.4 History ............................................................................................................................................124
9.4.1 Notification................................................................................................................................... 124
9.4.2 Alarm record................................................................................................................................ 126
9.4.3 Logs............................................................................................................................................. 127
9.5 Message center..............................................................................................................................128
9.5.1 Access "Message center" screen................................................................................................ 128
9.5.2 Creating and sending a message ............................................................................................... 129
9.5.3 Viewing and replying to a message ............................................................................................ 130
9.6 Emergency unlock..........................................................................................................................131
9.7 Online firmware update..................................................................................................................132
10 FCC............................................................................................................................................................133
11 Cyber security............................................................................................................................................134
11.1 Disclaimer.......................................................................................................................................134
11.2 Performance and service and network performance.....................................................................134
11.3 Deployment guideline ....................................................................................................................136
11.4 Upgrading.......................................................................................................................................136
11.5 Backup/restore...............................................................................................................................136
11.6 Data pursing...................................................................................................................................137

Table of contents
Product manual 2TMD041800D0088 │
4
11.7 Malware prevention solution..........................................................................................................138
11.8 Default passwords and user accounts...........................................................................................138
11.9 Password rule ................................................................................................................................138
11.10 Logging...........................................................................................................................................139

Notes on the instruction manual
Product manual 2TMD041800D0088 │
5
1 Notes on the instruction manual
Please read through this manual carefully and observe the information it contains. This will
assist you in preventing injuries and damage to property, and ensure both reliable operation and
a long service life for the device.
Please keep this manual in a safe place. If you pass the device on, also pass on this manual
along with it. ABB accepts no liability for any failure to observe the instructions in this manual.
2 Safety
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 100-240 V supply system to be performed only by
specialist staff!
3 Intended use
As a part of the ABB-Welcome IP system, this device can only be used with accessories from
the system

Intended use
Product manual 2TMD041800D0088 │
6
3.1 Typical application
1. Single family house
If SmartAP is used in a single family house to control all devices in the house, it should be set to
"Residential".
Connection of indoor stations
If LAN+LAN indoor station (Article no. is H82635.-.) is used as a master indoor station, LAN2 is
to be connected to the router by default.
If LAN+Wifi indoor station (Article no. is H82634.-.) is used as a master indoor station, the wifi
port is to be connected to the router only.
SmartAP (Residential)
Master IS
Private IP actuator
CAT.5/IP bus line
Router switch
Wifi
APP
Villa OS
Slave IS
IP camera
POE
Internet
Master IS Slaver IS
LAN2 (default) LAN2 (default)
LAN1 (default)
Wifi only
Wifi
Router Router
Router Router
LAN+Wifi
H82364.-.
LAN+Wifi
H82364.-.
LAN+Wifi
H82364.-.
LAN+LAN
H82365.-. LAN+LAN
H82365.-.
Or
Router

Intended use
Product manual 2TMD041800D0088 │
7
2. High rise building
If SmartAP is used in a high rise building to control all devices in this building, it should be set to
"Functional".
Connection of indoor stations
LAN1 of master indoor station should be connect to the switch placed in the building.
SmartAP (Functional)
Building OS
Building IP actuator
IP camera
POE
POE
POE
POE
POE
...
Master IS
Master IS
Master IS
Master IS
Master IS
Master IS
Master IS
Master IS
CAT.5/IP bus line
Apartment
Building
Master IS
Router
2nd confirmed OS
Slave IS
Private IP actuator
Master IS Slaver IS
LAN1 (default) LAN2 (default)
LAN1 (default)LAN1 only
Wifi
Switch
Switch
Router
Router
LAN+Wifi
H82364.-.
LAN+Wifi
H82364.-.
LAN+Wifi
H82364.-.
LAN+LAN
H82365.-. LAN+LAN
H82365.-.
Or
Router
POE
POE

Environment
Product manual 2TMD041800D0088 │
8
4 Environment
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with household
waste.
– The device contains valuable raw materials that can be recycled. Therefore,
dispose of the device at the appropriate collecting facility.
4.1 ABB devices
All packaging materials and devices from ABB bear the markings and test seals for proper
disposal. Always dispose of the packing materials and electric devices and their components via
an authorized collection facility or disposal company.
ABB products meet the legal requirements, in particular the laws governing electronic and
electrical devices and the REACH ordinance.
(EU-Directive 2012/19/EU WEEE and 2011/65/EU RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)

Product description
Product manual 2TMD041800D0088 │
9
5 Product description
No. Function
1USB stick connector (reserved)
2Tamper switch
3(1) Status indicator
4Binary input (used to interact with other systems)
5Binary output (used to interact with other systems)
6Reset button
Press and hold this button for 10 s to reset the password of the first admin. Please see the
"Reset the password for the first admin" chapter for more details.
7Switch for operation in AP mode
When AP mode is activated, LED flashes red light.
8 Micro SD card connector (reserved)
9Security switch
ON = does not allow/delete the devices
OFF = allows add/delete the devices (default)
10 Power input connector (DC-JACK input)
11 LAN (PoE)
1
2
3
5
4
6
7
8
9
10
11

Product description
Product manual 2TMD041800D0088 │
10
(1) Status indicator
Description Blue Red Green White Priority
Reset to factory default Flashing
slowly 7 (Highest)
Alarm (e.g. tamper alarm) Flashing
quickly 6
Power on or Initial setup on 5
AP mode is enabled Flashing
slowly 4
Security mode is disable on 3
Doorbell is muted on 2
Normal operation on 1