Abbott AlphaTRAK 2 Instruction manual

AlphaTRAK is a trademark of Abbott Group
of companies in various jurisdictions.
AT2-2064 © 2014 Abbott Laboratories
Press to save your selection.
m
No Sound Low Beep Loud Beep
Time
To set the time:
Press to change the hour and minutes.
Press to save your selections.
Press to accept time format or to change.
c
c
m
m
Hour Minutes
Date
To set the date:
To change the month, press to display the
correct month and to save it. Do the same for
the day and year.
Press to accept date format or to change.
To save all your settings, press and hold down
for three seconds until the meter turns off.
Your meter is now set and ready to use. Follow the
steps on the other side of the Quick User’s Guide to
perform a test.
c
cm
m
m
For additional information, please contact Abbott Animal Health
Customer Service at: 888-299-7416 (US)/(CA) or [phone] (EU)
www.AlphaTRAKmeter.com
www.AlphaTRAKmeter.co.uk
www.AlphaTRAKmeter.ca
Accuracy Made Easy
®
®
Quick User’s Guide
AlphaTRAK 2 Meter Setup
Before performing a test, setup the volume,
time and date on your meter. With the meter off,
press and hold the button for 3 seconds
until S-E-T appears. Press to bypass the
reminder alarms.
Sound
To set the volume, press c
m
m

How to Perform a
Blood Glucose Test
Here are the steps on how to perform a blood glucose
test with your AlphaTRAK 2 Meter and Test Strips.
See full user guide, instructional video or package insert for more
detailed information on capillary sampling and accuracy data.
Gather all supplies needed
to perform the test.
Choose a Capillary Sampling site.
1.
2.
Marginal ear vein Elbow callus (dog only)
Inner lip (dog only) mmol/L Paw pad mg/dL
(depending on model)
6. Turn meter on by
inserting the test
strip with buttery
facing up and ying
into the meter.
3. Check test strip
expiration date on
the vial.
4. Insert a new lancet
into lancing device,
push till it comes
to a complete
stop, and replace
clear cover.
5. Adjust depth by rotating
the wheel: 1 is shallowest
and 4 is deepest.
8.
9. Touch only one side of the
test strip sample area to
the blood drop and wait for
the beep (if sound is on).
10. Results
appear in
seconds.
7. Make sure the dog or cat
code on the meter match the
code on the test strip vial. If
necessary, change the code
on the meter by pressing
or .
Obtain a small blood
drop from the animal.
m c