Roche ACCU-Chek Guide Me User manual

Test strip
Display
Menu buttons
Connectivity with Bluetooth®
wireless technology
Strip port
Power button
CHILDRESISTANT
BATTERY DOOR
NOW FEATURING A
Test blood glucose
Remove a test strip from
the spill-resistant container.
Close the cap tightly.
Insert the metallic end of
the test strip into the meter.
Touch the yellow edge of the
test strip to the blood drop.
The test result appears on the
display in less than 4 seconds.

WARNING – KEEP BATTERIES OUT OF REACH OF CHILDREN. If you suspect your child has swallowed or inserted a
button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 for fast, expert advice.
FOR PEOPLE WITH DIABETES. ALWAYS READ THE INSTRUCTIONS FOR USE. CONSULT YOUR HEALTHCARE
PROFESSIONAL FOR ADVICE.
With more than 40 years of experience, our number one goal is to help persons with diabetes track and self-manage their blood
glucose levels with high-quality products.
To support patient safety, Accu-Chek Guide Me meters now have a child resistant door.
Follow these simple instructions to change the batteries in your Accu-Chek Guide Me meter. Don’t worry—your logbook data
will be saved as you remove and replace the batteries.
accu-chek.com.au | Accu-Chek Enquiry Line: 1800 251 816
1Brazg RL, et al. J. Diabetes Sci Technol. Nov 2016. DOI:10.1177/1932296816652902
ACCU-CHEK, ACCU-CHEK GUIDE and ACCU-CHEK GUIDE ME are trademarks of Roche. ©2021 Roche Diabetes Care. The Bluetooth®word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Roche is under license. All other product names and trademarks are the property of their respective owners.
Roche Diabetes Care Australia Pty Ltd, 2 Julius Avenue, North Ryde NSW 2113, Australia. ABN 69 602 140 278. Date of preparation: April 2021. AU-874. 09489347001
• Check and remove any choke hazard stickers from the batteries prior to installing.
• The meter uses two 3-volt lithium batteries, coin cell type CR2032. It is a good idea to have spare batteries available.
• Always replace both batteries at the same time with the same high quality brand.
Note
Changing the Batteries
Open the child-resistant battery
door by inserting a narrow object,
such as a pen, into the slot (see
image above).
Push the tab in the direction of the
arrow and lift the battery door up.
Remove the old batteries. Slide the new batteries under the
black tabs with the (+) side facing up.
Put the battery door back in place
and snap it closed.
321