
www.abelko.se
When you use the Local PC, the computer should be set for DHCP
(which it usually is).
1. Open a web browser and enter the IP address
https://192.168.142.1 in the address bar. This will take you to the
login page.
User name and password the rst time you log in:
User name: cong
Password: ef56
2. Go to the menu Communication and Network, and set the IP
address and netmask. You can also check the DHCP box, the unit will
then automatically get network settings. After a while, you can see which
IP address it received. You can use this IP address to access the device
from a PC, connected to the same network.
The Local PC port is slower than the Ethernet, and should only be used
to congure the units network settings.
HTTPS
The rst time you log in to an Ultra, you will be warned that the
connection is not private, or similar. This is because the HTTPS, that is
being used in the system, is a secure and encrypted connection. The
security is guaranteed by a certicate, which needs to be issued for
a specic IP number. Since the IP address is adjustable, there is no
certicate for the unit. You need to add this exception. The procedure
differs depending on which browser you are currently using.
Graphical programming
Graphical programming is made as a JAVA applet. If you don’t have JAVA
installed, go to www.java.com and download the latest version.
When you enter the graphical programming, you need to approve that
add-ons are allowed to run in the browser, and also that you trust the
website.
Manuals, updates and other information are available at
www.ultra.abelko.se.