Abtus CAT-HD14TA-G User manual

ABtUS SINGAPORE PTE LTD www.abtussingapore.com
ABtUS SIGAPORE PTE LTD www.abtussingapore.com
HDMI 1×4
Splitter Extender
Model: CAT-HD14TA-G
rev.10032017

User Operation Guide
2*Specications are subject to changes without notice.
PRODUCT DESCRIPTION
FEATURES
The ABtUS CAT-HD14TA-G 1x4 HDMI & Full 3D support over Single CAT5 Distribution Amplifier with
Local Output provides the most flexible solution by which the high definition video and high quality
audio can be transmitted to different locations over a long distance. The devices are cascadable,
allowing you to extend HDMI compliant displays almost anywhere. The input HDMI source can be
duplicated and distributed to up to 4 HDMI enable displays through cost effective Cat-5/5e/6 cables
with HDMI over CAT5 receivers. For convenience, CAT-HD14TA-G is also equipped with a local
HDMI output for monitoring. With the built in equalization, the input HDMI cable can be extended
up to 20 meters (66 feet) long under Full HD with CAT-HD14TA-G.
● Support HDMI Deep Color & full 3D
● HDCP compliant
● Regenerates the HDMI signal
● HDMI local output for monitoring
● Supports default HDMI EDID and has the ability to learn the EDID of displays
● Extends up to 20m (66ft) of input HDMI cable
● Extends up to 60m (200ft) of output Cat-5/5e/6 solid UTP cable under HD (720p / 1080i)
● Extends up to 40m (130ft) of output CAT-5/5e/6 solid UTP cable under Full HD (1080p)
● Pure unaltered uncompressed 7.1ch digital HDMI over CAT5e/6 cable transmission
● Allows cascading
● Perfectly integrated with other HDMI over CAT5 series products
SWITCH SETTING
Left Position
SW1 EDID Learning Default EDID
SW2 HD Full HD
SW3 Audio - 2 Channel Audio - Multi Channel
SW4 2D 3D
Right Position
* The instant switching is enabled only when the video and audio setting of the source
has been adjusted to “Auto” or “Pass-through”

*Specications are subject to changes without notice. 3
1.POWER: indicate power ON/OFF
2.SIGNAL: indicate presence of HDMI signals
3.+5V DC power: connect to 5V 4A DC power adapter
4.HDMI INPUT: connect to HDMI source
5.HDMI OUTPUT: HDMI output for local monitor
6.CAT.X OUTPUT 1~4: CAT5 output
7.SW1: EDID Mode
8.SW2: EDID - Full HD/HD Selection
9.SW3: EDID - Audio Selection
10.SW4: EDID - 3D/2D Selection
PANEL DESCRIPTIONS
Front Panel
Back Panel
Top Panel
2
3
10
9
8
7
4 5 6
1

ABtUS SINGAPORE PTE LTD www.abtussingapore.com
INPUT: 1 × HDMI
OUTPUT: 4 × RJ-45
1 × HDMI
HDMI CONNECTOR Type A [19-pin female]
HDMI COMPLIANCE HDMI Deep Color & full 3D
HDCP COMPLIANCE Yes
VIDEO BANDWIDTH Single-link 225MHz [6.75Gbps]
VIDEO SUPPORT 480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color
TRANSMISSION OVER UTP [24-BIT COLOR] Full HD (1080p)-40m (130ft) [CAT.X]
HD (720p/1080i)-50m (165ft) [CAT.X]
AUDIO SUPPORT Surround sound (up to 7.1ch) or stereo digital audio
EQUALIZATION Built-in
INPUT TMDS SIGNAL 1.2 Volts [peak-to-peak]
INPUT DDC SIGNAL 5 Volts [peak-to-peak, TTL]
ESD PROTECTION [1] Human body model — ±19kV [air-gap discharge]
& ±12kV [contact discharge]
[2] Core chipset — ±8kV
PCB STACK-UP 4-layer board
[impedance control — differential 100Ω; single 50Ω]
FIXEDNESS 1U rack-mounting with ears
POWER SUPPLY 5V 4A DC
POWER CONSUMPTION 13 Watts [max]
OPERATION TEMPERATURE 0~40°C [32~104°F]
STORAGE TEMPERATURE -20~60°C [-4~140°F]
RELATIVE HUMIDITY 20~90% RH [no condensation]
HOUSING: Metal enclosure
GROSS DIMENSION: 270 × 175 × 80 mm
GROSS WEIGHT: 1000 g
SPECIFICATIONS
DIAGRAM
** For details and updated RS-232 Command and Program Software, please visit and download from www.abtussingapore.com
HDMI In
CAT-5
Out 1
CAT-5
Out 2
CAT-5
Out 3
CAT-5
Out 4
HDMI
Out 1
HDMI
Out 2
HDMI
Out 3
HDMI
Out 4
HDMI
Out
ABtUS
CAT-HD14TA-G
(back view)
ABtUS
CAT-HDRA-G