Before you begin:
•Deco M5 Wi-Fi Pod and power cord
• Ethernet cable for your Wi-Fi pod
• Ensure you follow the steps in order shown
>Additional Resources:
You can �ind additional self-help resources at
Acanac.com/support.
>Review the contents of your install kit:
• Coax cable to connect to the network
•Technicolor modem and power cord
Connect one end of the Coax Cable to the Cable port on your
modem, then connect the other end to a nearby coax wall
outlet.
Place your Wi-Fi pod next to your internet modem.
Using the Ethernet Cable provided, connect one end to LAN
Port 1 on your modem and the other end to a port on your
Wi-Fi pod.
(Do not use LAN Port 2 of the modem.)
1
2
Setting Up Your High Speed Internet Service and Wi-Fi Network
Attach the Power Cord to the Power Port on your
modem, then plug the cord into a nearby power outlet.
Connect your Wi-Fi pod to a Power Outlet.
The Wi-Fi pod light will turn solid green. This can take
about 5 minutes.
Go to Wi-Fi settings on a device you would like to connect, and
search for available Wi-Fi networks. Select the Wi-Fi Network
(SSID) and enter the password that matches those found on
the bottom of your Deco M5 Wi-Fi pod.
That’s it, you should now be ready to
enjoy your Acanac Wi-Fi!
34
For help changing your Wi-Fi Network (SSID) name or Wi-Fi password and for additional security tips visit Acanac.com/support.
Power Ports
Wi-Fi Network (SSID): Acanac12345
Password: 1234567891012
