Accentrics Home DS-D314-100 User manual

X1 Techo
X1 Letoit
X1 Bottom panel
X1 Placa base
X1 Plaque carte mere
X1 Right patition panel
X1 Right side panel
X1 Panel lateral derecho
X1 panneau lateral droit
X1 Left side panel
X1 panel izquierdo
X1 pameau gaude
X1 Left partition panel
X1 Right door
X1 Middle - Right door
X1 Left door
X1 Middle - Left door
Page 1/6
X4 Left / Right shelf
X2 Middle Shelf
Residential Use Only Made in Viet Nam / Fabriqqué au Vietnam / Hecho en Vietnam
X1 Top panel
PARTS LIST / LISTE DES PIECES / LISTA DE PIEZAS
ITEM NO . /ARTICLE NO. / ARTICULO NO : DS-D314-100
Description/ La Description /Descripción : FOUR DOOR CANE CONSOLE

X8 Bolt∅1/4"*23mm
X8 Perno∅1/4"*23mm
X8 Boulon∅1/4"*23mm
X24 Shelf Support∅6.5mm
X24 Soporte laminado∅6.5mm
X24 Support en stratifie∅6.5mm
X1 Back panel
X1 Placa posterion
X1 Fond de panier
X5 Final Leg
Page 2/6 Residential Use Only Made in Viet Nam / Fabriqué au Vietnam / Hecho enVietnam
Description/ La Description /Descripción: FOUR DOOR CANE CONSOLE
PARTS LIST / LISTE DES PIECES / LISTA DE PIEZAS
ITEM NO. / ARTICLE NO . / ARTICULO NO : DS - D314 - 100

Step 1
Step 2
Page 3/6
Add Legs (Part N) by inserting into the holes and turning clockwise.
Do not over tighten the legs to avoid stripping the bolts.
Insert the hardware for Left and Right Side Panels
(Part C&D) into the bottom frame and slide forward
to secure them into place. Repeat this for Left and Right
Partition Panels (Parts E & F). For best results, you may
want to turn the cabinet forward on it's face and press
down on the panels to make sure they are fully secure.
Residential Use Only Made in Viet Nam / Fabriqué au Vietnam / Hecho in Vietnam
On a soft dry surface,turn Bottom Panel (Part B) over with bottom facing up.
ITEM NO . / ARTICLE NO . ARTICULO NO : DS-D314-100
Description/ La Décription /Descrpción : FOUR DOOR CANE CONSOLE
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE

Step 4
Page 4/6
Make sure that the locking hardware switches in
Panels (C,D,E,F) are in the open position indicated
by the straight arrow in the diagram. Align the
hardware in Top Panel (Part A) with the hardware
in the panels and lower into place. Making sure that
the male hardware is complete inserted into the
female hardware in the top, secure the top in place
by turning the switch as indicated by the curved
arrow in the diagram.
Insert the back panel (Part M) into the back of the
cabinet aligning the pre-drilled holes. Insert Bolts (Part 1)
into the holes and turn clockwise to tighten. Do not over
tighten. Remove wing wrench from bolt when you are
finished.
Residential Use Only Made in Viet Nam / Fabriqué au Vietnam / Hecho en Vietnam
ITEM NO . / ARTICLE NO . / ARTICULO NO : DS-D314-100
Description/ La Description /Descripción : FOUR DOOR CANE CONSOLE
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE

Page 5/6
Insert shelf supports (Part 2) into the desired
position in the cabinet.
Insert the adjustable shelves (part K & L) into the
cabinet (1st layer)
to the position where there are shelf supports.
Step 6
Residential Use Only Made in Viet Nam / Fabriqué au Vietnam / Hecho en Vietnam
ITEM NO . / ARTICLE NO . / ARTICULO NO : DS-D314-100
Description/ La Description /Descripción : FOUR DOOR CANE CONSOLE
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE/ INSTRUCCIONES DE MONTAJE

(2nd layer) to the postion where there are shelf supports.
Insert the adjustable shelves ( part K & L) into the cabinet
Page 6/6
Align the male/female hinges on the doors
and panels and lower into place.
Residential Use Only Made in Viet Nam / Fabriqué au Vietnam / Hecho en Vietnam
ITEM NO . / ARTICLE NO . / ARTICULO NO : DS-D314-100
Description/ La Description /Descripción : FOUR DOOR CANE CONSOLE
ASSEMBLY INSTRUCTION / NOTICE DE MONTAGE / INSTRUCCIONES DE MONTAJE