Manual office guillotine with 430 mm cutting length
(for formats up to A3) and 435 mm insertion depth
”SCS“ - the Safety Cutting System:
-hinged, transparent safety guard on the front table
(locks automatically while cutting)
-transparent hand guard on the rear table
-safety catch (locks blade lever in upper position)
-safe and convenient blade change from the front
without removing machine covers
-blade changing device with covered cutting edge
-blade depth adjustment from the outside of the machine
-cutting stick can be turned or replaced easily from the
outside of the machine
cuts up to 500 sheets of paper (70 g/m2)
or bound brochures up to 40 mm
430 mm cutting length
solid all-metal construction
blade from high quality steel
solid steel blade carrier
adjustable blade guides made of hardened steel
manual paper clamp
side lay with measuring scale in cm and inches
handle with calibration ring for fine adjustment
of backgauge
spindle-driven backgauge for precise positioning
designed as table top machine, a stand
is available as an option (at an extra cost)
TECHNICAL DATA EBA 436 M
Cutting length in mm 430
Cutting height in mm 40
Insertion depth in mm 435
Front table depth in mm 230
Minimum cut in mm 34
Dimensions WxDxHinmm 880x880x400/10901
Weight in kgs 44 / 541
1with stand
The technical data is approximate. Subject to change. 10/10
EBA 436 M
with optional stand
OFFICE GUILLOTINE
EBA 436 M
