Accora 400 User manual

Accora 400 / Accora 600 Mattress
Instructions For Use
IFU-FM1-001EN REV 03
AUG 2019
Page 1of 3
Introduction
DEALER: These instructions MUST be given to
the user of the product.
USER: BEFORE using this product, read this
manual and save for the future reference.
General
Signal words are used in this manual and apply to
hazards or unsafe practices which could result in
personal injury or property damage. See the
information below for definitions of the signal
words.
WARNING: Warning indicates a potentially
hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: Caution indicates a potentially
hazardous situation which, if not avoided, may
result in property damage or minor injury or both.
Product Description
The Accora 400 and 600 mattresses are multi-
tiered pressure redistribution mattresses with high
density head / torso sections. The mattress
incorporates an air channel heel section, firm
mattress edges and a 4 way stretch top cover.
Clinical Applications
Accora 400 is indicated for users up to 350 lbs.
Accora 600 is indicated for users up to 450 lbs.
Suitability for the mattress must be assessed by a
competent practitioner.
Instructions for use
1. Remove all packaging.
2. Lay the mattress onto the bed frame, ensuring
there are no sharp edges which may tear the
cover.
3. Do not use the mattress without a cover as it
provides a protective barrier which helps
extend the life of the product.
4. Ensure the mattress is orientated with the silk
screen text facing upwards and the feet
graphic at the foot end of the bed.
Decontamination
WARNING
Mattresses MUST be cleaned regularly after
each patient use. Because of the potential
risk of infectious exposure, cleaning with
the patient on the bed is not recommended.
All equipment should be inspected. Any
item that is visibly soiled with the patient’s
blood or other body fluids should be
properly cleaned or removed. Staff
members should treat all soiled bedding as
if it were contaminated with pathogenic
microorganisms. Staff members should
wear appropriate protective clothing when
cleaning mattresses. All cleaning solutions
must be properly diluted according to the
manufacturer’s instructions. Follow
standard institutional wipe down and
infection control procedures. DO NOT open
the zippered mattress top cover during
cleaning, infection control procedures or
during use. DO NOT launder or autoclave
mattress covers.
To clean the mattress
1. Remove all bedding.
2. Clean the top and bottom covers with an
organic cleaner or soapy water.
3. Wipe down the mattress unit with a damp
cloth, pre-soaked with warm water containing
a mild detergent. Approved intermediate level
disinfectants may be used according to the
cover material.
4. After cleaning, please avoid dust and
proximity to dusty areas. All parts should be
air dried thoroughly before use.

Accora 400 / Accora 600 Mattress
Instructions For Use
IFU-FM1-001EN REV 03
AUG 2019
Page 2of 3
CAUTION
To avoid fabric breakdown and loss of
waterproofing, use the following types of
properly diluted standard cleaning solutions:
•Quaternary Wipe Down
•Phenolic Wipe Down
•8-10% Bleach/Water Wipe Down
Iodophor type disinfectants (e.g. Betadine®etc.)
are NOT recommended and will stain fabrics.
Maintenance
Inspection
The internal and external parts for the mattress
must be inspected at least every 3 months for
damage and wear. Remove the mattress from
service and replace all damaged parts.
Inspection Record
An inspection record should be kept recording the
Inspection date, Name of Inspector, Whether
damage found, Date removed from service, repair
date, returned to service date.
Compression Test
ENTRAPMENT WARNING
Proper patient assessment and monitoring, and
proper maintenance and use of equipment is
required to reduce the risk of entrapment.
Variations in bed rail dimensions, and mattress
thickness, size or density could increase the
risk of entrapment. Visit the FDA website at
http://www.fda.gov to learn about the risks of
entrapment.
Refer to the owner’s manuals for beds and rails
for additional product and safety information.
Mattress MUST fit the bed frame and bed rails
snugly to reduce the risk of entrapment.
1. Remove the bedding from the mattress.
2. Measure the thickness of the mattress
(mattress depth) in an uncompressed area.
3. Lay a straight edge over the compressed area
of the mattress. Measure the depth of the
compressed area (compression depth).
4. Use the following formula to determine the
amount of compression (compress
percentage):
Disposal
Disposal of the mattresses should be in
accordance with local regulations and facility
standard operating procedures.
Limited Warranty
This warranty is extended only to the original purchaser/user
of our products.
This warranty gives you specific legal rights and you may
also have other legal rights which vary from state to state.
Accora warrants the mattress and cover when purchased
new and unused to be free from defects in materials,
workmanship, and assembly for the following time periods:
Part No
Foam
Cover
ACC400-0-FM1-100
5 Years
2 Years
ACC400-0-FM1-200
5 Years
2 Years
ACC400-0-FM2-100
5 Years
2 Years
ACC600-0-FM1-100
10 Years
2 Years
ACC600-0-FM1-200
10 Years
2 Years
ACC600-0-FM2-100
10 Years
2 Years
If within such warranty period any such product shall be
proven to be defective, such product shall be repaired or

Accora 400 / Accora 600 Mattress
Instructions For Use
IFU-FM1-001EN REV 03
AUG 2019
Page 3of 3
replaced with new or refurbished product components, or are
fund corresponding to the proper service time shall be
offered, at Accora option. This warranty does not include any
labor or shipping charges incurred in replacement part
installation or repair of any such product. Moreover, the
warranty period of their paired or replaced product shall
terminate with the termination of the warranty period for the
original product component.
For warranty service, please contact the dealer from whom
you purchased your Accora product. In the event you do not
receive satisfactory warranty service, please write directly to
Accora at the address on the back cover. Provide the
dealer’s name, address, model number, and the date of
purchase, indicate nature of the defect and, if the product is
serialized, indicate the serial number.
Accora will issue a return authorization. The defective unit or
parts shall be cleaned using disinfectant prior to return and
must be returned for warranty inspection using the serial
number, when applicable, as identification within thirty days
of return authorization date. DO NOT return products to our
factory without our prior consent. C.O.D. shipments will be
refused; please prepay shipping charges.
LIMITATIONS AND EXCLUSIONS: THE FOREGOING WARRANTY SHALL
NOT APPLY TO SERIAL NUMBERED PRODUCTS IF THE SERIAL
NUMBER HAS BEEN REMOVED OR DEFACED; PRODUCTS SUBJECTED
TO NEGLIGENCE, ACCIDENT, IMPROPER OPERATION, MAINTENANCE
OR STORAGE; DAMAGE CAUSED BY ANY EVENTS OUTSIDE THE
CONTROL OF ACCORA INCLUDING, BUT NOT LIMITED TO: DAMAGE
FROM CARELESSNESS, ACCIDENTAL DAMAGE, DAMAGE FROM
SHARP OBJECTS, TEARS, NEGLIGENCE (WHETHER WILLFUL OR
NOT), TAMPERING, DAMAGE FROM FIRE, DAMAGE OCCURRING IN
TRANSIT AFTER DELIVERY BY ACCORA OR EXCESSIVE WEAR AND
TEAR, INCLUDING BUT NOT LIMITED TO THE FAILURE TO FOLLOW
CLEANING INSTRUCTIONS, USE OF INAPPROPRIATE CLEANING
COMPOUNDS AND FAILURE TO ENSURE THAT ANY PRODUCT IS
THOROUGHLY DRIED BEFORE TURNING OR FLIPPING IT OVER;
DAMAGE RESULTING FROM CONTAMINATION FOLLOWING DAMAGE TO
THE COVER AND FAILURE TO REPLACE IT, CONTAMINATION DUE TO
INCORRECT STORAGE OR FAILURE TO INSPECT THE INTERIOR OF
THE PRODUCT AS STATED HEREIN, OR DAMAGE DUE TO UNUSUAL
CONTAMINATION OR INFECTION, SPILLAGE OR STAINING, OR USE OF
ABRASIVE, CORROSIVE OR ANY SUCH SIMILAR DAMAGING
SUBSTANCE; DAMAGE DUE TO UNDERTAKING ANY ACTION OR
PROCEDURE USING THE PRODUCT OUTSIDE ITS NORMAL AND
INTENDED USE; DAMAGE RESULTING FROM FAILURE TO REPLACE
DAMAGED PARTS PROMPTLY OR DAMAGE DUE TO INTERIOR PARTS
BEING USED WITHOUT THE COVER, BEING USED WITH A DAMAGED
COVER, OR WITH THE COVER BEING INCORRECTLY FITTED; DAMAGE
WHEN ANY PARTS OF THE PRODUCT ARE USED AS PART OF, OR IN
CONJUNCTION WITH, ANY OTHER PRODUCT OR PIECE OF EQUIPMENT
EXCEPT AS SPECIFICALLY PROVIDED FOR BY ACCORA; DAMAGE NOT
PROVEN TO THE SATISFACTION OF ACCORA TO BE DUE TO
DEFECTIVE MATERIALS, WORKMANSHIP OR ASSEMBLY; OR
PRODUCTS MODIFIED WITHOUT ACCORA EXPRESS WRITTEN
CONSENT INCLUDING, BUT NOT LIMITED TO MODIFICATION THROUGH
THE USE OF UNAUTHORIZED PARTS OR ATTACHMENTS OR
PRODUCTS DAMAGED BY REASON OF REPAIRS MADE TO ANY
COMPONENT WITHOUT THE SPECIFIC CONSENT OF ACCORA. IT IS A
CONDITION OF THIS WARRANTY THAT THE FOLLOWING IS COMPLIED
WITH:
1) ALL INSTRUCTIONS FOR CLEANING AND MAINTENANCE OF THE
PRODUCT ARE ADHERED TO.
2) THE INTERNAL AND EXTERNAL PARTS OF ANY PRODUCT ARE
INSPECTED AT LEAST ONCE EVERY THREE (3) MONTHS FOR ANY
DAMAGE AND WEAR. ALL DAMAGED PARTS ARE REPLACED
IMMEDIATELY WITH THE APPROPRIATE REPLACEMENT PART, OR THE
PRODUCT IS IMMEDIATELY TAKEN OUT OF SERVICE UNTIL THE
REPLACEMENT PART HAS BEEN OBTAINED AND THE DAMAGED PART
HAS BEEN REPLACED.
THE FOREGOING EXPRESS WARRANTY IS EXCLUSIVE AND IN LIEU OF
ANY OTHER EXPRESS WARRANTIES WHATSOEVER, WHETHER
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND
THE SOLE REMEDY FOR VIOLATIONS OF ANY WARRANTY
WHATSOEVER, SHALL BE LIMITED TO REPAIR, REPLACEMENT, OR
REFUND OF THE DEFECTIVE PRODUCT PURSUANT TO THE TERMS
CONTAINED HEREIN. THE APPLICATION OF ANY IMPLIED WARRANTY
WHATSOEVER SHALL NOT EXTEND BEYOND THE DURATION OF THE
EXPRESS WARRANTY PROVIDED HEREIN. ACCORA SHALL NOT BE
LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
WHATSOEVER AND DISCLAIMS ANY LIABILITY BEYOND THE INITIAL
PURCHASE PRICE OF THE PRODUCT. THIS WARRANTY SHALL BE
EXTENDED TO COMPLY WITH STATE/ PROVINCIAL LAWS AND
REQUIREMENTS.
Technical Data
Materials
Top Cover
Polyfiber / Polyurethane
Stretch
Bottom Cover
Vinyl
Dimensions
Part No
Length (in)
Width (in)
ACC400-0-FM1-100
80
36
ACC400-0-FM1-200
84
36
ACC400-0-FM2-100
80
42
ACC600-0-FM1-100
80
36
ACC600-0-FM1-200
84
36
ACC600-0-FM2-100
80
42