Accuride Senseon 10EL User manual

10EL/10ELAO/10TREL/10EL-2
QUICK REFERENCE
Height: 2.18" [55.4 mm]
Length: 2.79" [70.9 mm]
Thickness: .50" [12.7 mm]
Lock Force: 250 lbf
MODEL 10EL/10ELAO/10TREL/10EL-2
Electronic Lock
Withstands up to 250 pounds of force
Available standard lock/unlock, auto-open, and electronic touch release.
APPLICATION: Provides
an easy-to-install method to
secure and control access to
doors and other openings.
This product is covered by
U.S. (8,328,299), and various
patents pending.
Finish: Zinc and black polymer
Height: 2.18" [55.4 mm]
Length: 2.79" [70.9 mm]
Thickness: .50" [12.7 mm]
MountingnHardware: #8 pan head screw
Features: Electronic locking mechanism with manual override
Withstands up to 250 pounds of force
Installation jig assists positioning for doors
10EL: Lock/Unlock, with a detent (open manually)
10ELAO: Auto-Open (automatically opens and propels doors or drawers open about 2" when unlocked)
Note: Auto-Open action works best with auto-lock feature.
Free swing hinges are recommended for Auto-Open best performance.
10TREL: Electronic touch release and electronic lock.
Note: Mechanism propels doors or drawers open when activated by touch.
Free swing hinges are recommended for Touch Release best performance.
10EL-2: Standard lock/unlock, for doors or drawers with soft-close hinges or drawers with soft-close slides.
.26
[6.7]
1.57
[39.8]
2.35
[59.7]
.17
[4.2]
Ø.18
[4.6]
2.79
[70.9]
Manual
Override
Manual
Override
Strike
Catch
US Patent 8328299
2.18
[55.4]
1.98
[50.3]
.20
[5.1]
Inch
mm
.5
[12.7]
1.75
[44.4]
.75
[19.1]
.38
[9.5]
1.00
[25.4]
.38
[9.5]
.28 X .16
[7.1 X 4.0]
(2X)
10EL shown

2
Installation Instructions
Overlay Doors
1. Locate lock assembly by placing the installation jig against the
edge of the cabinet at the position desired (Figure 1).
2. Attach the lock assembly to the cabinet using the appropriate
mounting screws for your application (Figure 1).
WARNING! Before installing the lock, you must
have access to the manual override lever or the
activation device connected. Otherwise, you will
not be able to unlock and open the door.
Figure 1. Overlay Doors
Figure 2. Overlay Doors
Cable
Installation jig
Figure 3. Overlay Doors
Figure 4. Overlay Doors
3. Install the cable to the connector located at the back of the lock
assembly. Perform the electrical installation and make sure the
lock assembly locks and unlocks properly before closing
the door (Figure 2).
4. Remove one side of the backing from the double-sided tape and
apply the tape to the door strike component.
5. With the lock in the closed position, peel the backing off of the
double-sided tape on the door strike component.
6. Close the door and firmily apply pressure to ensure the door
striker adheres to the door (Figure 3).
7. Disengage the lock from its closed position using the activation
device or manual override.
8. Open the door and remove the installation jig. Attach the door
striker using the appropriate flat-head mounting screws for your
application (Figure 4).
Inset Doors
1. Drill pilot holes into your cabinet according to Figure 5. Be sure
to take panel thickness into consideration.
2. Drill pilot holes into the door according to Figure 6.
3. Install the cable to the connector located at the back of the lock
assembly. Perform the electrical installation and make sure the lock
assembly locks and unlocks properly before closing the door.
4. Fasten lock and door strike respectively, using the appropriate
mounting hardware for your application. See Figures 6 and 7.
Installation jig
Access to
manual override
Be sure you have
access to the manual
override lever or
activation device.
Min gap 1/8"
Refer to Senseon Installation Guide for complete system instructions.

3
Figure 6. Panel Preparation for Door Strike
H + .44"
.38"
1"
.38" From Door Edge
Figure 5. Panel Preparation for Lock
2.35"
1.57"
Height + .26"
H = Height
Height + .44"
T = Panel Thickness
T + .38"
Figure 7.
Inset Doors

For the most current technical information please visit www.accuride.com Copyright © 2019 Accuride International Inc. 3700-9567(1267)-R3-1019
For warranty information visit
http://www.senseonsecure.com/warranty
Specications
Each individual electronic lock is packaged in a box which
includes an installation jig, double sided tape.
Bulk pack (P): Full box quantities, includes 10 electronic locks.
Complete your lock order by specifying the following:
8 each D10TREL-1
20 each D10EL AO1 P
Total Locks
Model
Kick-Out Option
Packaging
Note: To complete your order include the proximity
and the hub kit.
Ordering Instructions
Required Kits
Proximity Kit: One proximity kit per each Senseon System.
Part number SEPROX-US-Kit1.
This kit includes:
1 RFID Reader
1 Power Supply
1 Reader Holder
1 DC Power Cable
1 Reader Splitter Cable
1 AC Cord
1 Proximity Kit Box
2 Power Supply Holders
12 Cable Clips
Hub Kit: One Hub kit per cabinet opening (drawer or door). Modu-
lar wiring kit part number SEHUBX-KIT1.
This kit includes:
1 Hub Assembly
2 Hub to Lock Cable
4 Cable Clips
6" Double Stick Tape
Lock: Zinc and black polymer.
All components are RoHS compliant.
NOTE: Specifications, materials, prices, terms, and
delivery are subject to change without notice.
Packaging Options
D10EL-1 (Open Manually)
D10EL AO1 (Auto-Open-option)
D10TREL-1 (Electronic Touch Release)
D10EL-2 (for Soft Close products)
4
Optional Kits
Linking Cables: To connect multiple banks of lock openings.
Top Linking SELINK-TOP-KIT1
Bottom Linking SELINK-BTM-KIT1
Extension Cables: Available in 3 lengths
6" SECBLX-6-KIT1
12" SECBLX-12-KIT1
24" SECBLX-24-KIT1
Note: See installation and ordering guides.
Click here for Installation Guide
Click here for Ordering Guide
Warranty
For the most current technical information visit www.accuride.com
Accuride International Inc.
12311 Shoemaker Avenue
Santa Fe Springs, CA 90670
TEL [phone]
FAX [phone]
Manufacturing, Engineering, and Sales
United States • Germany • Japan •
Mexico • United Kingdom • China
WARNING: This product can expose you to chemicals including nickel, which
is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.