AccuTemp AccuSTEAM EGD G2 User manual

EGD G2 DROP-IN GRIDDLE
PARTS MANUAL
ACCUTEMP PRODUCTS INC
11919 John Adams Dr. New Haven, IN 46774
www.accutemp.net Email: [email protected]
1-800-480-0415
is Manual is for EGD Drop-In Griddles Starting with Serial Number 24492 & Higher

SP8158-2202 2
AccuSteam G2 Drop-In Griddle Parts Manual
WARNING
The State of California enacted the California Safe Drinking Water and Toxic
Enforcement Act of 1986, (Prop. 65), which “prohibits any person in the course
of doing business from knowingly and intentionally exposing any individual to
a chemical known to the State of California to cause cancer or reproductive toxicity
without first giving clear and reasonable warning to such individuals.”
The Governor’s Scientific Advisory Panel added Carbon Monoxide to the list of
hazardous chemicals known to cause reproductive harm.
In order to establish full compliance with Proposition 65, a yellow warning label has
been attached to each gas fired unit manufactured by AccuTemp Products,Inc.
Carbon monoxide would not be present in concentrations that would pose a
“significant risk” to the consumer when the equipment is installed, operated and
maintained as follows:
1. Installed in accordance with all local codes, or in the absence of local codes,
with the current National Fuel Gas Code Z223.1, latest addenda.
2. Installed under a properly designed and operating exhaust hood.
3. Connected to the type of gas for which the unit is equipped.
4. Proper appliance pressure regulator installed on the gas supply line and
adjusted for the manifold pressure marked on the rating plate.
5. Adequate air supply to the unit and adequate clearance around the flue.
6. The equipment is operated in the manner intended using the proper utensil for
that type of appliance.
7. Keep the equipment clean and have it checked periodically.
8. Burner air adjustments, mechanical maintenance and repairs should be per-
formed by qualified service personnel.

SP8158-2202 3AccuSteam G2 Drop-In Griddle Parts Manual
WARNING SYMBOL DEFINITIONS
SYMBOL DEFINITIONS
Symbols are used to attract your attention to possible dangers. They are only
eective if the operator uses proper accident prevention measures. Some of the
symbols are boxed text; while others maybe just picture icons. Please give this
information the respect they deserve for safe operation.
Symbol Icons
Below are definitions of the symbol icons used
in this manual.
CAUTION -
HOT SURFACE
DANGEROUS
VOLTAGE
EARTH GROUND
DANGER
Indicates an imminently hazardous
situation; which, if unchanged, will result
in death or serious injury.
CAUTION
Indicates a potentially hazardous
situation; which, if unchanged, will
result in minor or moderate injury.
NOTE
Advises the reader of information
or instructions, vital to the
operation or maintenance of the
equipment.

SP8158-2202 4
AccuSteam G2 Drop-In Griddle Parts Manual
ELECTRICAL SHOCK HAZARD WHILE WORKING ON
ENERGIZED EQUIPMENT.
Unplug equipment prior to removing any components eected by electricity.
BURN HAZARD WHILE WORKING ON STEAM PRODUCING
EQUIPMENT.
When accessing the cooking chamber, be sure to always stand back while slowing
opening the door to allow the chamber to vent o the steam. Never reach into the cooking
chamber before it has completely vented o the steam.
Never reach into the cooking chamber or handle hot items without wearing the proper
heat protective gloves. Steam coming out of the holes on the right side of the cooking
chamber is invisible and can cause severe burns.
Water inside the steam chamber, creating steam, has a temperature of 212°F and will cause
burns if touched or spilled on the skin.
PERSONNEL INJURY HAZARD WHILE PICKING UP OR
MOVING HEAVY EQUIPMENT.
Always use 2 people and proper lifting techniques when picking-up, moving, or inverting
heavy equipment.
SLIP & FALL HAZARD WHILE WORKING ON WATER HOLDING
EQUIPMENT.
Keep the floor in front of the equipment clean and dry. If spills occur, clean them up
immediately to avoid potential injuries.
DANGER
SAFETY PRECAUTIONS

SP8158-2202 5AccuSteam G2 Drop-In Griddle Parts Manual
Table of Contents
Fig: 1.1 Drop-In Griddle Components - Page 6
Fig: 1.2 Drop-In Griddle Components - Page 7
Fig: 1.3 Remote Control Box Assy & Carton - Page 8
Fig: 1.4 Chassis Components - Page 9
Fig: 1.5 Chassis Components - Page 10
Fig: 1.6 Front Panel Components - Page 11
Fig: 1.7 Electrical Components - Page 12
Fig: 1.8 Electrical Components - Page 13
Active Standard Model Numbers
EGD2083B3650-(B0, C0, L0, Q0, R0)
EGD2403B3650-(B0, C0, L0, Q0, R0)
EGD4803B3650-(B0, C0, L0, Q0, R0)
EGD2083B4850-(B0, C0, L0, Q0, R0)
EGD2403B4850-(B0, C0, L0, Q0, R0)
EGD4803B4850-(B0, C0, L0, Q0, R0)
EGD2083B3664-C0
Active Military Model Numbers
EGD4403B3656-00
EGD4403B4856-00
GRIDDLE MODEL G2 EGD ELECTRIC

SP8158-2202 6
AccuSteam G2 Drop-In Griddle Parts Manual
Fig 1.1 Drop-In Griddle Components
ITEM # PART NUMBER DESCRIPTION
#1-1 AT2A-6535-1 208V 36” DROP IN GRIDDLE
#1-2 AT2A-6535-2 208V 48” DROP IN GRIDDLE
#1-3 AT2A-6535-3 240V 36” DROP IN GRIDDLE
#1-4 AT2A-6535-4 240V 48” DROP IN GRIDDLE
#1-5 AT2A-6534-5 440V/480V 36” DROP IN GRIDDLE
#1-5 AT2A-6534-6 440V/480V 48” DROP IN GRIDDLE
#2-1 AT2A-6533-1 CONTROL PANEL ASSY - FULL
#2-2 AT2A-6533-2 CONTROL PANEL ASSY - RH
#2-3 AT2A-6533-3 CONTROL PANEL ASSY - LH
#3 AT2A-2771 SHIPPING PALLET
#4 AT2A-2772 LOOSE GRIDDLE PIECES
#5 AT2L-3725-1 DATA TAG, ELECTRIC GRIDDLE
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
INDICATED EDGES
MUST BE SOFTENED:
* = NEAR SIDE
*
= FAR SIDE
* = BOTH SIDES
1
3
FIG-1 AT2A-6526-1
2
4
1.00
.60
CONTROL PANEL FULL AND LEFT HAND
SCALE 1 : 4
5
8.00
.60
CONTROL PANEL RIGHT HAND
SCALE 1 : 4
5
NOTE:
1. CENTRALLY PLACE 1 TRAY ONTO SHIPPING AND SECURE WITH STAPLES.
2. PLACE SUPPORTS INTO TRAY AND LOCATE, FROM INSIDE WALLS OF TRAY,
1 WALL THICKNESS AND STAPLE IN PLACE.
3. PLACE GRIDDLE (ITEM 1) ON SUPPORTS.
4. INSTALL CARTON OUTER TUBE AND SECURE TO TRAY AND SUPPORTS
WITH STAPLES.
5. PLACE ITEMS 2 & 4 ON TOP OF GRIDDLE.
6. INSTALL TOP TRAY.
7. SECURE CARTON ASSEMBLY FOR SHIPMENT.
8. REMOVE CONTROL PANEL ASSY FROM ITEM
2
CARTON AND PLACE
ITEM
5
ONTO CONTROL PANEL. PLACE PANEL ASSY BACK INTO CARTON.
DATA TAG INFORMATION TO BE SAME AS DATA TAG INFORMATION APPLIED
TO ITEM
1
.
ECN REV DESCRIPTION DATE APPR
REVISIONS
1113 F RELEASED TO PRODUCTION 03/11/21 GLS/ATG
AT2A-6526-24/
EGD4803B4800-L0
AT2A-6526-23/
EGD4803B4800-R0
AT2A-6526-22/
EGD4803B4800-C0
AT2A-6526-21/
EGD4803B3600-L0
AT2A-6526-20/
EGD4803B3600-R0
AT2A-6526-19/
EGD4803B3600-C0
AT2A-6526-18/
EGD4403B4800-K0
AT2A-6526-17/
EGD4403B4800-Q0
AT2A-6526-16/
EGD4403B4806-00
AT2A-6526-15/
EGD4403B3600-K0
AT2A-6526-14/
EGD4403B3600-Q0
AT2A-6526-13/
EGD4403B3606-00
AT2A-6526-12/
EGD2403B4800-L0
AT2A-6526-11/
EGD2403B4800-R0
AT2A-6526-10/
EGD2403B4800-C0
AT2A-6526-9/
EGD2403B3600-L0
AT2A-6526-8/
EGD2403B3600-R0
AT2A-6526-7/
EGD2403B3600-C0
AT2A-6526-6/
EGD2083B4800-L0
AT2A-6526-5/
EGD2083B4800-R0
AT2A-6526-4/
EGD2083B4800-C0
AT2A-6526-3/
EGD2083B3600-L0
AT2A-6526-2/
EGD2083B3600-R0
AT2A-6526-1/
EGD2083B3600-C0
PART NUMBER ITEM DESCRIPTION
------ 111111 ------------ AT2L-3725-1 5 DATA TAG, ELECTRIC GRIDDLE
------ 111111 ------------ AT2A-2772-2 4 LOOSE PIECES NAVY GRIDDLE
111111 ------ 111111111111 AT2A-2772-1 4 LOOSE PIECES GRIDDLE
111 --- 111 --- 111 --- 111 --- AT2A-2771-3 3 PALLET BUILD
--- 111 --- 111 --- 111 --- 111 AT2A-2771-2 3 PALLET BUILD
1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - AT2A-6533-3 2 CONTROL PANEL ASSY - LH
- 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - AT2A-6533-2 2 CONTROL PANEL ASSY - RH
- - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 - - 1 AT2A-6533-1 2 CONTROL PANEL ASSY - FULL
111 --- 111 --------------- AT2A-6534-6 1 440V/480V 3Ø 48" DROP IN GRIDDLE
--- 111 --- 111 ------------ AT2A-6534-5 1 440V/480V 3Ø 36" DROP IN GRIDDLE
------------ 111 --------- AT2A-6534-4 1 240V 3Ø 48" DROP IN GRIDDLE
---------------
111 ------ AT2A-6534-3 1 240V 3Ø 36" DROP IN GRIDDLE
------------------ 111 --- AT2A-6534-2 1 208V 3Ø 48" DROP IN GRIDDLE
--------------------- 111 AT2A-6534-1 1 208V 3Ø 36" DROP IN GRIDDLE
PART NO MODEL STRING VOLTS Hz AMPS KWATTS
AT2A-6526-1 EGD2083B3600-C0 208 50/60 40 15
AT2A-6526-2 EGD2083B3600-R0 208 50/60 40 15
AT2A-6526-3 EGD2083B3600-L0 208 50/60 40 15
AT2A-6526-4 EGD2083B4800-C0 208 50/60 40 15
AT2A-6526-5 EGD2083B4800-R0 208 50/60 40 15
AT2A-6526-6 EGD2083B4800-L0 208 50/60 40 15
AT2A-6526-7 EGD2403B3600-C0 240 50/60 35 15
AT2A-6526-8 EGD2403B3600-R0 240 50/60 35 15
AT2A-6526-9 EGD2403B3600-L0 240 50/60 35 15
AT2A-6526-10 EGD2403B4800-C0 240 50/60 35 15
AT2A-6526-11 EGD2403B4800-R0 240 50/60 35 15
AT2A-6526-12 EGD2403B4800-L0 240 50/60 35 15
AT2A-6526-13 EGD4403B3606-00 440 50/60 21 16
AT2A-6526-14 EGD4403B3600-Q0 440 50/60 21 16
AT2A-6526-15 EGD4403B3600-K0 440 50/60 21 16
AT2A-6526-16 EGD4403B4806-00 440 50/60 21 16
AT2A-6526-17 EGD4403B4800-Q0 440 50/60 21 16
AT2A-6526-18 EGD4403B4800-K0 440 50/60 21 16
AT2A-6526-19 EGD4803B3600-C0 480 50/60 23 20
AT2A-6526-20 EGD4803B3600-R0 480 50/60 23 20
AT2A-6526-21 EGD4803B3600-L0 480 50/60 23 20
AT2A-6526-22 EGD4803B4800-C0 480 50/60 23 20
AT2A-6526-23 EGD4803B4800-R0 480 50/60 23 20
AT2A-6526-24 EGD4803B4800-L0 480 50/60 23 20
F
G
J
B
Wednesday, March 24, 2021 1:00:24 PM
11 5 39 27
D
12 10 8 6 4 1
468
1012 7 29 3511
A
C
E
H
KK
H
E
C
A
D
B
J
G
F
F
DROP IN GRIDDLE TOP ASSEMBLY
ATG
03/18/21
N/A
03/18/21
Comments:
Material:
Finish:
N/A
Do Not Scale Drawing
Proj. Engr.
GLS
GLS
Checked
Drawn
03/05/21
Date
Name
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
AT2A-6526
Size: Drawing No.:
Rev:
Title:
D
Sheet 1 of 1
Scale: 1:1
ECN: 1113
Released
Fig 1.1 Drop-In Griddle ComponentsFig 1.1 Drop-In Griddle Components

SP8158-2202 7AccuSteam G2 Drop-In Griddle Parts Manual
ITEM # PART NUMBER DESCRIPTION
#1 AT2A-2592-1 1” GREASE SPOUT EXTENSION
#2 AT2A-2592-2 2” GREASE SPOUT EXTENSION
#3 AT2A-2592-3 3” GREASE SPOUT EXTENSION
#4 AT2A-2592-4 4” GREASE SPOUT EXTENSION
#5 AT2A-2529-X GREASE TROUGH ASSY*
#6 AT2A-2552-X GREASE TRAY ASSEMBLY*
#7 AT2A-2764-X CABLE ASSEMBLY*
#9 MP5004 ELECTRIC GRIDDLE OWNERS MANUAL
#10 AT2M-2553-1 GREASE TROUGH HNGR BRKT
#11 AT2M-2554-1 GREASE TROUGH HANGER
#12 AT2S-2726-1 RECTANGULAR TUBE
#14 AT0L-6466-1 OVERLAY, GREASE TRAY
#16 AT0F-2777-41040 SCREW, #10 TYPE AB X 1/2 TRUSS HD
#17 AT0F-2755-41040 SCREW, #10-24UNC X 1/2 PHILIPS ROUND HEAD
#18 AT0F-1921-61060 BOLT, 5/16-18 UNC 2A X 3/4” CARRIAGE
#19 AT0F-1922-60000 WASHER, 5/16” HELICAL SPRING LOCK
#20 AT0F-2778-61000 NUT, 5/16-18UNC-2B SS HEX MACHINE SCREW
#21 AT0F-2691-51002 NUT, ¼-20 NYLOC
#22 AT2M-2535-1 RETAINER BRACKET
#23 AT0F-2666-40000 WASHER, SS #10 INTERNAL TOOTH LOCK
#24 AT0T-3033-1 PRODUCT REGISTRATION FORM
#25 AT2M-2554-2 GREASE TROUGH HANGER
#26 AT2M-5094-1 GREASE TROUGH HNGR BRKT
*CONTACT ACCUTEMP SERVICE PARTS AT 1-800-480-0415 OR EMAIL [email protected]
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
INDICATED EDGES
MUST BE SOFTENED:
* = NEAR SIDE
*
= FAR SIDE
* = BOTH SIDES
12
7
18
16
19
17
20
13
15
1
4
14
5
22
911
10
21
3
2
6
23
24
K
AT2A-2772-1
L
M
M
M
N
NOTE:
1. CENTRALLY AFIX ITEM 14 (LABEL) ONTO ITEM 6.
2. PLACE ITEMS 16 THRU 21 INTO ITEM 15.
3. WRAP SEPARATELY ITEMS 1- 4, 10, 11, 22
WITH ITEM 13.
4. PLACE ITEMS 8, 9, 1- 4, 7, 10, 11, 15, 22 AND 24 INTO ITEM 6.
5. PLACE ITEM 6 INTO ITEM 5 AND WRAP WITH ITEM 13.
6. PLACE ITEM 5 INTO ITEM 12.
C
C
H
H
D
B C
B
B
B
B
B
B
B
B
B
B
B
E F
B
JJ
K
K
J
K01
K01
K01
K
J
L
QTY
AT2A-2772-3
QTY
AT2A-2772-2
QTY
AT2A-2772-1
PART NO. ITEM NO. DESCRIPTION
1 - - AT2M-5094-1 26 GREASE TROUGH HNGR BRKT
1 - - AT2M-2554-2 25 GREASE TROUGH HANGER
111 AT0T-3033-1 24 PRODUCT REGISTRATION FORM
666 AT0F-2666-40000 23 WASHER, SS #10 INTERNAL TOOTH LOCK
4 4 4 AT2M-2535-1 22 RETAINER BRACKET
8 8 8 AT0F-2691-51002 21 NUT, ¼-20 NYLOC
2 2 2 AT0F-2778-61000 20 NUT, 5/16-18UNC-2B SS HEX MACHINE SCREW
2 2 2 AT0F-1922-60000 19 WASHER, 5/16" HELICAL SPRING LOCK
2 2 2 AT0F-1921-61060 18 BOLT, 5/16-18 UNC 2A X 3/4" CARRIAGE
6 6 6 AT0F-2755-41040 17 SCREW, #10-24UNC X 1/2 PHILIPS ROUND HEAD MACHINE
8 8 8 AT0F-2777-41040 16 SCREW, #10 TYPE AB X 1/2 TRUSS HD
1 1 1 AT0H-2782-1 15 BAG, 3 X 5 RECLOSABLE
111 AT0L-6466-1 14 OVERLAY, GREASE TRAY
1 AR AR AT0S-2770-1 13 FOAM OR BUBBLE WRAP
1 1 1 AT2S-2726-1 12 RECTANGULAR TUBE
- 1 1 AT2M-2554-1 11 GREASE TROUGH HANGER
- 1 1 AT2M-2553-1 10 GREASE TROUGH HNGR BRKT
111 MP5004 9 ELECTRIC GRIDDLE OWNERS MANUAL
- 8
2
- - AT2A-2764-5 7 CABLE ASSEMBLY
- 2 2 AT2A-2764-1 7 CABLE ASSEMBLY
- 1 - AT2A-2552-3 6 ASSY, LONG BAFFLED LOCKING GREASE TRAY
1 - 1 AT2A-2552-1 6 GREASE TRAY ASSEMBLY
- 1 - AT2A-2529-3 5 GREASE TROUGH ASSY
1 - 1 AT2A-2529-1 5 GREASE TROUGH ASSY
1 1 1 AT2A-2592-4 4 4" GREASE SPOUT EXTENSION
1 1 1 AT2A-2592-3 3 3" GREASE SPOUT EXTENSION
1 1 1 AT2A-2592-2 2 2" GREASE SPOUT EXTENSION
1 1 1 AT2A-2592-1 1 1" GREASE SPOUT EXTENSION
ECN REV DESCRIPTION DATE APPR
REVISIONS
1113 N
CHG'D: (BOM) GP 3, ITM 7 WAS AT2A-2764-1; ADDED:
ITM 7, AT2A-2764-5
06/21/21 GLS/ATG
1127 M
CHG'D: (BOM) ITEM 7, QTY 2 WAS 1; ITM 14 WAS AT0L-
3659-1
02/25/21 GLS/ATG
001085 L
CHG'D: (ALL GRPS) ITM 14 AT0L-3659-1 WAS AT0L-2716-
111/21/19
LPZ/ATP
884 K01 ADDED: GP 3, ITEMS 25 & 26 AND SHT 2 1/31/17 GLS/ATG
513 K
CHG'D: ITEM NO 9, MP5004 WAS AT2T-2742-1; NOTE 4,
PLACE ITEMS 8, 9, 1- 4, 7, 10, 11, 15, 22 AND 24 INTO
ITEM 6 WAS PLACE ITEMS 8, 9, 1- 4, 7, 10, 11, 15, 22 AND
WARRANTY CARD INTO ITEM 6 ;
ADDED: ITEM 24, AT0T-3033-1
01/05/10 G. SEITZ
216 J
RMV’D: ITM 8 AT2T-2757-1, CHG’D: GROUP
DESCRIPTION AT2A-2772-1 WAS GP-1, ADDED: AT2A-
2772-2, ITM 23 AT0F-2666-40000
8/10/05 ATP/GLS
128 H ADDED: TO NOTE 3 & 4, 22 7/28/04 ALB/GLS
121 F AT0F-1922 WAS -61000 LOCK WASHER 6/16/04 JAH
103 E AT0F-1922 WAS -60000 LOCK WASHER 5/25/04 JAH
095 D ADDED WARRANTY CARD TO NOTE #4 5/24/04 ALB
099B C
NOTE 2 READ 16 THRU 20. RMV'D ITEM 9 FROM NOTE 3
& RMV'D ITEM 14 FROM NOTE 4.
5/21/04 JAH
099 C CHG'D: ITEM 14 WAS AT2L-2716-1 5/11/04 JAH
088 B
CHG'D ITEMS: 8,9,10,11,14,15,16,17,18,19,
20 HAD INCOMPLETE PART NUMBERS, ADDED
ITEMS 21 & 22
3/29/04 GLS
065 A
CHG; REMOVE PART NO FROM ITEM 8 WAS AT0S-2770;
AT0S-2782 WAS AT1H-BAG3X5
2/12/04 ALB/GLS
F
G
J
B
Monday, June 28, 2021 11:40:15 AM
11 5 39 27
D
12 10 8 6 4 1
468
1012 7 29 3511
A
C
E
H
KK
H
E
C
A
D
B
J
G
F
N
LOOSE PIECES GRIDDLE
ALB
02-03-04
N/A
02-03-04
Comments:
Material:
Finish:
N/A
Do Not Scale Drawing
Proj. Engr.
GLS
GLS
Checked
Drawn
01-22-04
Date
Name
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
AT2A-2772
Size: Drawing No.:
Rev:
Title:
D
Sheet 1 of 2
Scale: 1:4
ECN: EDR 038B
Released
Fig 1.2 Drop-In Griddle Components

SP8158-2202 8
AccuSteam G2 Drop-In Griddle Parts Manual
Fig 1.3 Remote Control Box Assy & Carton
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
INDICATED EDGES
MUST BE SOFTENED:
* = NEAR SIDE
*
= FAR SIDE
* = BOTH SIDES
2
7
3
1
6
5
4
A
AT2A-6548-1
9
8
10
A
2.25
1.50
2.25
1.00
VIEW A-A
4
5
NOTE:
1. WRAP ASSY WITH ITEM 7.
2. FILL OR PACK AS REQUIRED.
ECN REV DESCRIPTION DATE APPR
REVISIONS
1113 A RELEASE TO PRODUCTION 03/11/21 GLS/ATG
AT2A-6548-1
PART NUMBER ITEM DESCRIPTION
1 AT0E-2086-4 10 CORD GRIP LOCKNUT
1 AT0E-1049-1 9 STRAIN RELIEF 1 1/4" HUB CABLE RANGE 1.00-1.125
1 AT0A-2788-3 8 POWER CABLE ASSY
AR AT0S-2935-2 7 PACKAGING, FOAM
4 AT0F-2755-41040 6 SCREW, #10-24UNC X 1/2 PHILIPS ROUND HEAD MACHINE
1 AT2L-6418-1 5 SCHEMATIC LABEL, GRIDDLE
1 AT0L-2798-1 4 OVERLAY, WARNING, ELECTRICAL
1 AT2S-4882-3 3 CARTON, BOX 29.25 x 11.25 x 5.75
1 AT2M-6546-1 2 COVER, BOX, CONTROL
1 AT2A-6528-3 1 CONTROL BOX ASSEMBLY
F
G
J
B
Thursday, September 2, 2021 3:43:36 PM
11 5 39 27
D
12 10 8 6 4 1
468
1012 7 29 3511
A
C
E
H
KK
H
E
C
A
D
B
J
G
F
A
ASSY, REMOTE CONTROL BOX &
CARTON
ATG
03/18/21
N/A
03/18/21
Comments:
Material:
Finish:
N/A
Do Not Scale Drawing
Proj. Engr.
GLS
GLS
Checked
Drawn
03/11/21
Date
Name
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
AT2A-6548
Size: Drawing No.:
Rev:
Title:
D
Sheet 1 of 1
Scale: 1:4
ECN: 1113
Released
ITEM # PART NUMBER DESCRIPTION
#1 AT2A-6528-3 CONTROL BOX ASSEMBLY
#2 AT2M-6546-1 COVER, BOX, CONTROL
#3 AT2S-4882-3 CARTON, BOX 29.25 x 11.25 x 5.75
#4 AT0L-2798-1 OVERLAY, WARNING, ELECTRICAL
#5 AT2L-6418-1 SCHEMATIC LABEL, GRIDDLE
#6 AT0F-2755-41040 SCREW, #10-24UNC X 1/2 PHILIPS ROUND HEAD
#7 AT0S-2935-2 PACKAGING, FOAM
#8 AT0A-2788-3 POWER CABLE ASSY
#9 AT0E-1049-1 STRAIN RELIEF 1 1/4” HUB CABLE RANGE
#10 AT0E-2086-4 1 CORD GRIP LOCKNUT

SP8158-2202 9AccuSteam G2 Drop-In Griddle Parts Manual
Fig 1.4 Chassis Components
Standard & Military Models Only
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
INDICATED EDGES
MUST BE SOFTENED:
* = NEAR SIDE
*
= FAR SIDE
* = BOTH SIDES
D
7
8
5
3
14
2
12
10
9
11
1
14
23
9
19
18
AT2A-6534-1 SHOWN
4
20
17
20
21
14
14
6
SEE EXPLODED
VIEW C
DETAIL D
SCALE 1 : 2
16
SEE DETAIL A
FOR WIRE HOOK-UP,
SEE SHEET 4
FOR WIRING IDENTIFICATION
FOR ALL CONFIGURATIONS
F
G
J
B
Wednesday, March 24, 2021 12:56:15 PM
11 5 39 27
D
12 10 8 6 4 1
468
1012 7 29 3511
A
C
E
H
KK
H
E
C
A
D
B
J
G
F
A
DROP-IN GRIDDLE ASSY
ATG
03/18/21
N/A
03/18/21
Comments:
Material:
Finish:
N/A
Do Not Scale Drawing
Proj. Engr.
GLS
GLS
Checked
Drawn
03/05/21
Date
Name
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
AT2A-6534
Size: Drawing No.:
Rev:
Title:
D
Sheet 2 of 5
Scale: 1:4
ECN: 1113
Released
ITEM # PART NUMBER DESCRIPTION
#1 AT2A-6535-X DROP IN CHAMBER ASSEMBLY*
#2 AT2A-6532-X BOTTOM PAN ASSY*
#3 AT2A-6528-X CONTROL BOX ASSEMBLY*
#4 AT2L-6418-X SCHEMATIC LABEL, GRIDDLE*
#5 AT0E-1049-1 STRAIN RELIEF 1 1/4” HUB CABLE RANGE 1.00-1.125
#5-1 AT0E-1049-2 STRAIN RELIEF 3/4” HUB CABLE RANGE .625-.750
#6 AT0E-2086-X CORD GRIP LOCKNUT*
#7 AT0L-2798-1 OVERLAY, WARNING, ELECTRICAL
#8 AT0A-2788-X POWER CABLE ASSY*
#9 AT2I-6543-X INSULATION*
#10 AT2I-6543-X INSULATION*
#11 AT2I-6543-X INSULATION*
#12 AT2I-6543-X INSULATION*
#14 AT0F-1046-31030 SCREW, #8-32 x 3/8 PHLP TRUSS HEAD
#16 AT0E-5062-1 PROBE, SENSOR, RTD
#17 AT2M-6546-1 COVER, BOX, CONTROL
#18 AT2L-3725-1 DATA TAG, ELECTRIC GRIDDLE
#19 AT2M-5095-1 BRACE, SUPPORT
#20 AT0F-2755-41040 SCREW, #10-24UNC X 1/2 PHILIPS ROUND HEAD
#21 AT0F-1017-41002 NUT, #10-24UNC HEX SERRATED
#23 AT0H-2576-1 GROMMET, 7/8” NYLON
*CONTACT ACCUTEMP SERVICE PARTS AT 1-800-480-0415 OR EMAIL [email protected]

SP8158-2202 10
AccuSteam G2 Drop-In Griddle Parts Manual
ITEM # PART NUMBER DESCRIPTION
#1 AT2A-6532-X BOTTOM PAN ASSY*
#2 AT2A-6528-X CONTROL BOX ASSEMBLY*
#3 AT0L-2798-1 OVERLAY, WARNING, ELECTRICAL
#4 AT2I-6543-1 INSULATION
#5 AT2I-6543-2 INSULATION
#6 AT2I-6543-4 INSULATION
#7 AT2I-6543-6 INSULATION
#8 AT2A-6527-19 HARNESS ASSEMBLY
#9 AT0F-1046-31030 SCREW, #8-32 x 3/8 PHLP TRUSS HEAD
#10 AT0F-2666-40000 WASHER, SS #10 INTERNAL TOOTH LOCK
#11 AT0E-5062-1 PROBE, SENSOR, RTD
#12 AT2M-6546-1 COVER, BOX, CONTROL
#13 AT2L-3725-1 DATA TAG, ELECTRIC GRIDDLE
#14 AT2M-5095-1 BRACE, SUPPORT
#15 AT0F-2755-41040 SCREW, #10-24UNC X 1/2 PHILIPS ROUND HEAD
#16 AT0F-1017-41002 NUT, #10-24UNC HEX SERRATED
#17 AT0E-2699-1 TERMINAL, QDISC, INSULATED FEM
#18 AT0H-2576-1 GROMMET, 7/8” NYLON
#19 AT0F-2668-1 NUTSERT, #10-24 HEX
#20 AT0E-2885-5 SENSOR, REPLACEABLE
*CONTACT ACCUTEMP SERVICE PARTS AT 1-800-480-0415 OR EMAIL [email protected]
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
INDICATED EDGES
MUST BE SOFTENED:
* = NEAR SIDE
*
= FAR SIDE
* = BOTH SIDES
E
2
9
1
7
5
4
6
9
4
14
13
AT2A-6534-9 SHOWN
15
12
15
16
9
9
19
18
DETAIL E
SCALE 1 : 2
20
SEE DETAIL A
FOR WIRE HOOK-UP,
SEE SHEET 4
FOR WIRING IDENTIFICATION
FOR ALL CONFIGURATIONS
F
G
J
B
Thursday, September 2, 2021 3:36:06 PM
11 5 39 27
D
12 10 8 6 4 1
468
1012 7 29 35 11
A
C
E
H
KK
H
E
C
A
D
B
J
G
F
A
MODULE, CHASSIS
ATG
03/18/21
N/A
03/18/21
Comments:
Material:
Finish:
N/A
Do Not Scale Drawing
Proj. Engr.
GLS
GLS
Checked
Drawn
03/05/21
Date
Name
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
AT2A-6534
Size: Drawing No.:
Rev:
Title:
D
Sheet 4 of 4
Scale: 1:4
ECN: 1113
Released
Fig 1.5 Chassis Components
EGD2083B3664-C0 Model Only

SP8158-2202 11AccuSteam G2 Drop-In Griddle Parts Manual
ITEM # PART NUMBER DESCRIPTION
#1 AT2A-6562-X CONTROL PANEL SUBASSY*
#2 AT2M-6536-1 CONTROL PANEL COVER
#3 AT2L-6453-1 OVERLAY, CONTROL PANEL
#4 AT0E-3625-6-RXX CONTROLLER, QUANTEM SERIES 130*
#5 AT2A-6527-18 HARNESS ASSEMBLY
#6 AT0F-2777-31030 SCREW, #8 TYPE AB X 3/8 TRUSS HD
#7 AT0F-2691-41002 NUT, #10-24 NYLOC
#8 AT0H-3623-1 SPACER, ROUND CLEAR HOLE
#9 AT0F-2666-21000 WASHER, SS #6 EXTERNAL TOOTH LOCK
#13 AT1M-3607-4 BRACKET, INDICATOR LAMP
#14 AT0E-1800-2 INDICATOR LAMP RED LED 28V
#15 AT0H-3623-2 SPACER, ROUND CLEAR HOLE
#16 AT0F-3621-1 NUT, #6-32UNC-2B UNDERSIZE
#17 AT0F-2691-21002 NUT, #6-32 NYLOC
*CONTACT ACCUTEMP SERVICE PARTS AT 1-800-480-0415 OR EMAIL [email protected]
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
INDICATED EDGES
MUST BE SOFTENED:
* = NEAR SIDE
*
= FAR SIDE
* = BOTH SIDES
2
8
AT2A-6533-1
CONTROL PANEL ASSY - FULL
12
3
1
47 6
7
12
12 9
16
13
17
15
14
5
(AT2A-6527-3) (AT2A-6527-8)
A
A
TYPICAL ALL GROUPS
B
VIEW A-A
TYP ALL GROUPS
LABEL POSITION 1
LABEL POSITION 2
12
2X DETAIL B
SCALE 1 : 1
LARGE KEYING NOTCH
NOTES: UNLESS OTHERWISESPECIFIED
1. ITEM 10 & 11 NOT SHOWN FOR CLARITY.
2. WRAP PART/ASSEMBLY WITH ITEM 10 THEN
INSERT INTO ITEM 11.
AT2A-6533-3 AT2A-6533-2 AT2A-6533-1
PART NUMBER ITEM DESCRIPTION
222
AT0F-2691-21002 17 NUT, #6-32 NYLOC
777
AT0F-3621-1 16 NUT, #6-32UNC-2B UNDERSIZE MACHINE SCREW HEX
222
AT0H-3623-2 15 SPACER, ROUND CLEAR HOLE
222
AT0E-1800-2 14 INDICATOR LAMP RED LED 28V
111
AT1M-3607-4 13 BRACKET, INDICATOR LAMP
AR AR AR
AT0G-5081-1 12 FOAM STRIPS, PVC
111
AT2S-2726-1 11 RECTANGULAR TUBE
AR AR AR
AT0S-2935-2 10 PACKAGING, FOAM
777
AT0F-2666-21000 9 WASHER, SS #6 EXTERNAL TOOTH LOCK
777
AT0H-3623-1 8 SPACER, ROUND CLEAR HOLE
222
AT0F-2691-41002 7 NUT, #10-24 NYLOC
888
AT0F-2777-31030 6 SCREW, #8 TYPE AB X 3/8 TRUSS HD
111
AT2A-6527-18 5 HARNESS ASSEMBLY
111
AT0E-3625-6RXX 4 CONTROLLER, QUANTEM SERIES 130
111
AT2L-6453-1 3 OVERLAY, CONTROL PANEL
111
AT2M-6536-1 2 CONTROL PANEL COVER
1 - -
AT2A-6562-3 1 CONTROL PANEL SUBASSY - LH
- 1 -
AT2A-6562-2 1 CONTROL PANEL SUBASSY- RH
- - 1
AT2A-6562-1 1 CONTROL PANEL SUBASSY - FULL
ECN REV DESCRIPTION DATE APPR
REVISIONS
1113 A RELEASED TO PRODUCTION 03/08/21 GLS/ATG
F
G
J
B
Tuesday, May 18, 2021 2:03:34 PM
11 5 39 27
D
12 10 8 6 4 1
468
1012 7 29 3511
A
C
E
H
KK
H
E
C
A
D
B
J
G
F
A
CONTROL PANEL ASSEMBLY
ATG
03/18/21
N/A
03/18/21
Comments:
Material:
Finish:
N/A
Do Not Scale Drawing
Proj. Engr.
GLS
GLS
Checked
Drawn
03/05/21
Date
Name
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
AT2A-6533
Size: Drawing No.:
Rev:
Title:
D
Sheet 1 of 2
Scale: 1:2
ECN: 1113
Released
Fig 1.6 Front Panel Components

SP8158-2202 12
AccuSteam G2 Drop-In Griddle Parts Manual
ITEM # PART NUMBER DESCRIPTION
#1 AT2A-6560-X CONTROL PANEL SUBASSY*
#2 AT0E-1587-6 3 POLE CONTACTOR
#3 AT0H-2887-1 CABLE TIE MOUNT
#4 AT0E-3880-2 HIGH LIMIT CONTROLLER
#5 AT0E-2708-1 3AG OMNI-BLOK FUSE BLOCK 2 POS
#6 AT0E-2662-7 TRANSFORMER
#7 AT0A-6262-1 HEAT SINK SSR ASSEMBLY - DUAL POLE
#7-1 AT0E-6259-1 DUAL POLE SOLID STATE RELAY
#8 AT2A-6527-17 HARNESS ASSEMBLY
#9 AT0F-2755-41020 SCREW, #10-24UNC X 1/4 PHILIPS ROUND HEAD
#10 AT0F-2755-21020 SCREW, #6-32UNC X 1/4 PHILIPS ROUND HEAD
#11 AT0F-2777-31030 SCREW, #8 TYPE AB X 3/8 TRUSS HD
#12 AT0A-2736-8 MOV- TERMINALS ASSEMBLY
#13 AT0E-2731-2 FUSE 1¼ AMP 250V
#14 AT0E-1134-4 4 POSITION TERMINAL BLOCK
#15 AT0F-2755-41050 SCREW, #10-24UNC X 5/8 PHILIPS ROUND HEAD
#16 AT0F-1017-41002 NUT, #10-24UNC HEX SERRATED
#17 AT0E-3025-2 INSULATOR STRIP, 4 POSITION DOUBLE ROW
#18 AT0F-2755-21070 SCREW, #6-32UNC X 7/8 PHILIPS ROUND HEAD
#19 AT2A-6527-23 HARNESS ASSEMBLY
#20 AT0E-2086-2 CORD GRIP LOCKNUT
#21 AT0E-2086-4 CORD GRIP LOCKNUT
#22 AT0F-2666-40000 WASHER, SS #10 INTERNAL TOOTH LOCK
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
INDICATED EDGES
MUST BE SOFTENED:
* = NEAR SIDE
*
= FAR SIDE
* = BOTH SIDES
8
2
6
11
15
1
15
16
17
4
18
14
15
12
10
13
10
516
7
9
AT2A-6528-3
D
D
F
F
(AT2A-6527-4)
(AT2A-6527-7)
(AT2A-6527-5)
(AT2A-6527-6)
(AT2A-6527-1)
22
(AT2A-6527-2)
(AT2A-6527-14)
(AT2A-6527-15)
(AT2A-6527-14)
(AT2A-6527-15)
(AT2A-6527-22)
E
VIEW D-D
1
2
LABEL #1
LABEL #2
2X DETAIL E
SCALE 1 : 1
LARGE KEYING NOTCH
3
4
8
3.5
3
VIEW F-F
(SOME ITEMS REMOVED FOR CLARITY)
F
G
J
B
Monday, June 28, 2021 9:54:22 AM
11 5 39 27
D
12 10 8 6 4 1
468
1012 7 29 3511
A
C
E
H
KK
H
E
C
A
D
B
J
G
F
A
CONTROL BOX ASSEMBLY
ATG
N/A
03/18/21
Comments:
Material:
Finish:
N/A
Do Not Scale Drawing
Proj. Engr.
GLS
Checked
Drawn
03/05/21
Date
Name
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
AT2A-6528
Size: Drawing No.:
Rev:
Title:
D
Sheet 3 of 3
Scale: 1:2
ECN: 1113
Released
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal
.02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
INDICATED EDGES
MUST BE SOFTENED:
* = NEAR SIDE
*
= FAR SIDE
* = BOTH SIDES
1
20
15
14
17
21
19
15
16
AT2A-6528-2
22
(AT2A-6527-22)
(AT2A-6527-20)
(AT2A-6527-21)
20 21
F
G
J
B
Monday, June 28, 2021 9:54:22 AM
11 5 39 27
D
12 10 8 6 4 1
468
1012 7 29 3511
A
C
E
H
KK
H
E
C
A
D
B
J
G
F
A
CONTROL BOX ASSEMBLY
ATG
03/18/21
N/A
03/18/21
Comments:
Material:
Finish:
N/A
Do Not Scale Drawing
Proj. Engr.
GLS
GLS
Checked
Drawn
03/05/21
Date
Name
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
AT2A-6528
Size: Drawing No.:
Rev:
Title:
D
Sheet 2 of 3
Scale: 1:2
ECN: 1113
Released
Fig 1.7 Electrical Components

SP8158-2202 13AccuSteam G2 Drop-In Griddle Parts Manual
ITEM # PART NUMBER DESCRIPTION
#1 AT2L-6418-X SCHEMATIC LABEL, DROP-IN GRIDDLE*
#2 AT0E-1049-1 STRAIN RELIEF 1 1/4” HUB CABLE RANGE 1.00-1.125
#2-1 AT0E-1049-2 STRAIN RELIEF 1 1/4” HUB CABLE RANGE 1.00-1.125
#3 AT0E-2086-X CORD GRIP LOCKNUT*
#4 AT0A-2788-X POWER CABLE ASSY*
#5 AT2M-2768-1 PLATE, ADAPTER
#6 AT0F-2755-21020 SCREW, #6-32UNC X 1/4 PHILIPS ROUND HEAD
*CONTACT ACCUTEMP SERVICE PARTS AT 1-800-480-0415 OR EMAIL [email protected]
Fig 1.8 Electrical Components
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
INDICATED EDGES
MUST BE SOFTENED:
* = NEAR SIDE
*
= FAR SIDE
* = BOTH SIDES
1
4
3
2
AT2A-6637-1
1
4
32
5
6
AT2A-6637-2
ECN REV DESCRIPTION DATE APPR
REVISIONS
1113 A RELEASED TO PRODUCTION 08/20/21 GLS/ATG
AT2A-6637-2 AT2A-6637-1
PART NUMBER ITEM DESCRIPTION
2 - AT0F-2755-21020 6 SCREW, #6-32UNC X 1/4 PHILIPS ROUND HEAD MACHINE
1 - AT2M-2768-1 5 PLATE, ADAPTER
- 1 AT0A-2788-3 4 POWER CABLE ASSY
1 - AT0A-2788-1 4 POWER CABLE ASSY
- 1 AT0E-2086-4 3 CORD GRIP LOCKNUT
1 - AT0E-2086-2 3 CORD GRIP LOCKNUT
1 - AT0E-1049-2 2 STRAIN RELIEF 3/4" HUB CABLE RANGE .625-.750
- 1 AT0E-1049-1 2 STRAIN RELIEF 1 1/4" HUB CABLE RANGE 1.00-1.125
1 - AT2L-6418-2 1 SCHEMATIC LABEL, GRIDDLE
- 1 AT2L-6418-1 1 SCHEMATIC LABEL, GRIDDLE
F
G
J
B
Thursday, September 2, 2021 3:29:51 PM
11 5 39 27
D
12 10 8 6 4 1
468
1012 7 29 3511
A
C
E
H
KK
H
E
C
A
D
B
J
G
F
A
MODULE, HEAT SOURCE, VOLTAGE
PHASE
ATG
09/02/21
N/A
09/02/21
Comments:
Material:
Finish:
N/A
Do Not Scale Drawing
Proj. Engr.
GLS
GLS
Checked
Drawn
08/20/21
Date
Name
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
AT2A-6637
Size: Drawing No.:
Rev:
Title:
D
Sheet 1 of 1
Scale: 1:4
ECN: 1113
Released

SP8158-2202 14
AccuSteam G2 Drop-In Griddle Parts Manual