
-3--2-
In Case Of Difficulty
1. Place your feet in the same position every time weigh yourself. Stand still during
measurement.
2. Weigh yourself without clothing whenever possible. Clothes can vary in weight.
3. Move the scale to a location where it won't be bumped. If your scale is bumped
while being activated or while in use, an inaccurate reading may occur.
4. For the most consistent readings, weigh yourself at the same time of a day.
Allow for weigh functions due to food or during in your system.
5. The maximum capacity of this scale is 400 lbs/ 180 kgs / 28 st 8 lbs. Should “0_Ld”
appear on the display during a weighing, this indicates that the maximum weighing
capacity of the scale has been exceeded. Remove the weight immediately;
otherwise, permanent damage may occur.
Precautions
1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a
mild soap. Never use detergents, excess water, treated cloths, harsh cleaning
agent, or sprays. Do not attempt to lubricate or open scale casing as this will
void your warranty.
2. Although your scale is designed to be maintenance-free, it contains sensitive
electronic parts. Avoid rough treatment. Do not drop, kick, or jump on it. Treat it
with care to ensure the best performance.
lb
kg st
Bat hroom s cale
Max. 400lb /180k g/28s t 8lb
d= 0.2 lb / 0.1k g
1×3V CR 20 32
Made i n China
AW-BS 001
Unit selector switch
4. Step on the scale (disregarding the reading) and step off. This process insures
the scale is set and now ready for use. Do this whenever the scale is moved. At
all other times step straight onto the scale.
5. Step onto the scale platform and remain still. The display will count up to your
weight. Your weight is now displayed.
6. The scale will turn off automatically after approximately 10 seconds.
3. Please p scale on flat, hard surface. Carpeted or uneven floors may
affect accuracy.
lace the
2. The scale has been set at the factory to read weight in pounds (lb). You may
select kilogram (kg) or stone (st lb) (1 stone = 14 pounds) units of measurement
by pressing the button on the bottom of the scale.
1. Please see “Battery Installation” section of this manual for installation instructions.
Also, some models have a static cling label on the lens to prevent scratching.
Please remove before use.
General Weighing Operation
For the most accurate readings, we strongly recommend placing your bathroom
scale on a hard, level surface. For the best results, we recommend placing the
scale on surfaces such as: ceramic tiles, hardwood, stone, or concrete.
Do not place your scale on carpet, as this will cause the readings to be inaccurate
and inconsistent.
NOTE: please recycle or dispose of batteries per local regulations.
WA RNIN G: Batt erie s may pos e a c hoki ng hazard. Do not let childre n hand le
batteries.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak.
Remove the batteries if the scale will not be used for a long period of time.
2. Remove screw (or screws) from the battery compartment cover on the bottom
of the scale and remove the cover.
3. Remove the old battery from the compartment. (pre-installed)
5. Replace the battery compartment cover and screw(s).
6. Replace the batteries if “Lo” appears on the display, or the readings grow dim or
irregular.
Battery Installation
1. This scale operates on 1 "CR2032" lithium battery (pre-installed). Note: If you
have recently received your scale, you will not need to install a battery.
4. Place the new battery (not included) with the "+" sign up to the battery compartment.
WARNING:
Bathroom Scale Placement
3. This scale is designed to read weights between 11 and 400 lbs / 5 and 180 kgs
11 lbs and 28 st 8 lbs. To prevent damage, do not place more than 400 lbs / 180 kgs
/ 28 st 8 lbs on it.
/ 0 st