Acer XZ350CUB User manual

English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your
location.
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.
• PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ON THE LCD DISPLAY SCREEN OR CASE.
• Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any
nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to 140° F). Storing the LCD monitor outside this range
may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor base from the packaging and place it on a stable and level workspace.
2. Remove the monitor from the packaging.
3. Attach the monitor stand arm to the base.
• Ensure that the base is locked onto the monitor stand arm. (for selected models)
• Secure the base to the monitor stand arm by turning the screw using the integrated tab or a suitable coin. (for selected
models)
Connecting Your Monitor to a Computer
1. Turn off your monitor and unplug your computer’s power cord.
2. 2-1 Connect HDMI Cable (Only HDMI-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
Or connect the MHL cable (Only for MHL-Input Model)(Optional) to the
portable device.
2-2 Connect DP Cable (Only DP-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP cable to the computer.
3. Connect the Audio Cable. (Optional)
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Plug the power cords of your computer and your monitor into a nearby
electrical outlet.
6. Select Power-off USB charge ON/OFF to enable/disable Power-off USB charge
function.
External Controls
No. Icon Item Description
1Power button/
indicator
Press to turn the monitor ON or OFF. Lights up
to indicate the power is turned on.
2 Input button Press to toggle input sources.
3 Volume button Press to activate the volume sliding scale.
4 OSD menu button Press to activate the OSD menu.
5 OD button
Press to activate the OD menu and set it to Off,
Normal, or Extreme mode. If the OSD is active,
press it to enter a selection.
6Game Mode
button Press to activate the Game Mode menu.
HDMI
DC
DP
DP OUTDP IN
HDMI 2HDMI 1(MHL)
123456

English
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
CE declaration of Conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of
EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with
regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
Notice:
In order to prevent damage to the monitor, do not lift the monitor by its base.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this
equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the
Federal Communications Commission, to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Disposal of Waste Equipment by Users in Private Household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment. For more information about
where you can drop off your waste equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.

English
SPECIFICATION
Find manuals and other documents for your Acer product on the official Acer support website.
*Annual energy consumption is calculated using the typical power consumption 4 hours per day, 365 days per year.
LCD Panel
Driving System TFT Color LCD
Size 35”C (89 cm)
Pixel Pitch 0.32025 mm (H) x 0.32025 mm (V)
Brightness 300 cd/m2(Typical)
Contrast 100000000:1 Max (ACM)
Viewable Angle 178° (H) 178° (V) (CR=10)
Response Time 4 ms (G to G)
Panel Type VA
H-Frequency HDMI 1.4 (HDMI 1) (MHL): 31-83 kHz
HDMI 2.0 (HDMI 2) / DP: 31-167 kHz
V-Frequency HDMI 1.4 (HDMI 1) (MHL): 56-76 Hz
HDMI 2.0 (HDMI 2) / DP: 56-144 Hz
Display Colors 16.7 Million
Dot Clock 453 MHz
Maximum Resolution 2560 x 1080 @ 144 Hz
Plug & Play VESA DDCCI/DDC2B
Energy Efficiency Class B
*Annual Energy Consumption 76 (kWh) (for HDMI-input Model)
Power Consumption (at 200 nits)
On Mode 42 W (Typical)
Sleep Mode 1.2 W (Typical)
Off Mode 0.5 W (Typical)
Input Connector HDMI 19 pin (Only HDMI-Input Model)
DP (Only DP-Input Model)
Input Video Signal HDMI signal (Only HDMI-Input Model)(Optional)
DP (Only DP-Input Model)(Optional)
Speakers 9 W x 2 (Only Audio-Input Model)(Optional)
Maximum Screen Size Horizontal: 819.84 mm
Vertical: 345.87 mm
Power Source 100-240 V, 50/60 Hz
Environmental Considerations
Operating Temp: 0° to 40°C
Storage Temp: -20° to 60°C
Operating Humidity: 10% to 80%
Dimensions 844.4 (W) x 554.5 ~ 684.5 (H) x 299.9 (D) mm
Weight (N. W.) 12.7 kg (net)
Mechanism Specifications
Tilt: -5° to +25° (Only at the highest point can 25 degrees of recline be offered for the angle
of elevation)
Swivel: No
Height adjustment: No
Pivot: No
Detachable foot stand: Yes
External Controls
Switch/Buttons
Power Button
Input
Volume
Menu/Enter
OD/Exit
Game Mode
Functions
Contrast
Brightness
Focus (only Analog input model)
Clock (only Analog input model)
H. Position (only Analog input model)
V. Position (only Analog input model)
Blue Light
Sharpness
6-axis Saturate
6-axis Hue
Gamma
OD
DP-Format
Color Temperature
Language
OSD Timeout
Auto Configuration (only Analog input model)
Wide Mode (Full/Aspect)
ACM On/Off
Input Signal Selection
DDC/CI On/Off
Display Information
Reset
Exit
All specifications are subject to change without notice.