Acer PalmPro 7763P User manual

acer
Digital Multimedia Projector
Model name
PalmPro 7763P/65PE
OPERATING GUIDE
Thank you very much for purchasing this Acer DLP ™ Technology Projector.
Please read this operating guide to ensure correct use of the device. After reading this
manual, keep it for future reference.
Outline
This DLP ™ Technology Projector can display
various computer signals and NTSC/PAL/SECAM
video signals.
Features
(1) High brightness
(2) High resolution
(3) Compact size, light weight for portability
(4) RGB output terminal
(5) RS232 Communication
(6) Mouse emulation
(7) Complies with VESA DDC1/2B specifications

Copyright
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
Fill this in!!
below. The serial number is on the back of the product.
-mathn in the space
Monitor Information
’Product Name: ?7©|»/65PE
Date of Purchase:
Dealer Information
Dealer:
Telephone
^Caution
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER -SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL. AND PLEASE READ ALL OF THESE
INSTRUCTIONS BEFORE YOU OPERATE YOUR PROJECTOR. SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.

Table of Contents
C BO I OM (figure)
Installation.
B. Adjustab g f eet
I urn On/OfT Procedure
I x:crnal Control.
A Control Pad.
A l arep/tempera'-ure Status I I D ndicator.
B Replacing the I a^o.
C Mechanical ....
D Preset I Display Resolut on Ta
' Control Pad .

tha projection position is already set to the height of the line of vision; t
when projecting above or under the height of the line of vision, image di
H AVi

NTSC l.S. and Canada standard
PAL Western is*»pa standard
SECAM France and Eastern Europe standard
NT5C4.43 Middle East standard
If users want to watch CATV, AV box will serve the need
Description
A FRONT (figure)
Figure I Front view of 77S3W S5PE
B REAR (figure)

C BOTTOM (figure)
Adjustable feet
Figure 3 Bottom view of 7763P/65PE
Installation
A. Positioning
• This projector is basically designed to project on a flat projection surface.
• This projector can be focused from 1.5m-12m.
a
Figure 4 Positioning of 7763P/65PE
B. Adjustable Feet
Picture tilt and projection angle can be adjusted by twisting Adjustable Feet. Projection angle can be
adjusted 0° to 2° degrees by rotating Adjustable Feet.
Figure 5 Adjustable feet

Moving the Projector
Use the carrying handle when moving the projector.

Accessories
Please check and make sure your box contains everything listed below. If any pieces are missing, contact
Sis

Connection
1
A Connecting the Projector to Computer/Notebook
R|5 W

B Connecting the Projector to Macintosh/Power Book

Operation
Turn On/Off Procedure
A Power on
Press the Standby/On key to turn on the lamp. Th@ LfiDh*® fehk green during warm up and then light
solid green.
> "INPUT SIGNAL DETECTED, ACTIVATING AUTO IMAGE" will be displayed on the screen afterthe
projector has identified the input signal;
> "SEARCHING" message will be displayed on the screen if there is no signal input;
> ;'SYNC IS OUT OF RANGE" message will be displayed on the screen if the horizontal frequency of the
B Standby
Press the Standby/On key for more than one second to turn off the lamp. The LED will then blink
orange and the lamp will shut down, but the fen will continue to run for about I minute to cool the
lamp. After the fen stops the LED will'turn to a light solid orange
External Control
A Control Pad

B Remote Control

Main Unit Function
Standby/On
To turn the projection lamp on and off.
Freeze
Pressing this button displays a still (frozen) picture
«a g
Pressing this button partially magnifies a displayed picture,
(Move the picture with the Disk Pad after pressing the Magnify button)
Disk Pad
the on-screen menus are not active, it works as mouse pad. When the magnify
ftiHdtioij is active, use disk pad to move through the picture.
Call the OSD Menu
To enter sub pages
To select items.
Blank The blank screen is displayed by pressing Blank. And the blank screen will be
Source
Se ecs the input source
Mute
Mutes the sew*
Volume
Adjusts volume. The sound gets louder or quieter by pressing the “+" or
Laser Laser pointer on button Use as a stick (for indication)
Mouse Left-Ciifk
(bottom button)
Mouse Right- Click
When operating in mouse' emulation mode, it registers a right mouse dick.
Exit To leave current OSD Pages.
< * Drag
Ts move Left/Right among OSD Items.

Usage and Replacement of Lamp
Hit (picture will become dark or the color will fade after the lamp has been used fora longtime. In such
A Lamp/temperature Status LED Indicator
When the LED light is a continuous red, it means the lamp has exceeded (*l 500} service hours. After
this %ht appears, it is advisable to replace the projection lamp as soon as possible.
i. "CHAMGETHf LAMP, AND RSBf THE LAW TWER" Wjil fee displayed on' the screen if tie
lump hai been: operated for 1200 hours {see figure 16)
if "CHANGE THE LAMP, THE POWER WILL TURN Off,AFTER 20 HOURS" will be displayed on
the screen if the lamp has been operated for 1479 hours. The "20" will count down (see figure
If.
English 11

B Replacing the Lamp
Replacing the lamp
lamp can cool. High-pressure lamp when hit, may explode if improperly handled.

ftef*
Step 2
Figure 19 Lamp replacement: Step I, Step 2, Step 3

A Display Page
and Color Balance (Fig. 21). On the other hand, when the input source are video, S-video, TV or CATV,
there will be other 4 items on this page: Keystone, Brightness, Contrast and Sharpness(F;g.22)
Press the "Menu" button again to scroll through the items, press 11 < 11 or “ ► ” to adjust the item scale, or
press the "Exit" button to go back to-the main OSD page.
Keystone (Decrease)
Brightness (Dark)
Content (Lower)
Col<§* (Red)
(Increase)
(Bright)
(Higher)
(Blue)
Source is PC
——