ACF Greenhouses Grow More Shade Net Kit 6.5' User manual

Assembly Instructions
Customer Support
[email protected]
1-888-888-9050
Model: Shade Net Kit 6.5’
Item No. 2532100

Stage 1 Stage 2
IMPORTANT:
*Please read these instructions carefully before assembling.
*Please keep these instructions for future reference.
PARTS LIST
Tools Required:
*Screwdriver
*Drill
*Spanner
2
NO.Qty.
PART
4
L02A
L03B
L03A
W01
W02
W03
W04
4
4
4
4
3
S01
M6X10 8
M01
M6 8
6
Z02
4X16
8
Z01
5X16
W05 5
NO.Qty.
PART
W06 4
J01 10

1
11
2
2
1
2
L01A
L01A L01A
L02A
L02A
Y1
L02A
Y1
Stage 1
Each section of shading kit is in 2m modules (see page 4 for installation of additional modules).
Insert L01A into the hem of the shading material.
Insert into the channel of L02A.

2
34
5
5
5
5
77
33
44
4
L03A
L03B
L02A
L03A L03B
L03B
L02A
L02A
L02A
Z01
S01
M01
6
6
6
Stage 2
Ridge brackets (L03A) and Eave brackets (L03B) are to be placed 300mm from the end of each
IMPORTANT!
Pay attention to this small hole which
should face up and to the right side.
Greenhouse ridge and eave profile. Drill 8 holes through L03A into the ridge frame and also drill 8
holes through L03B into the gutter/eave profile (refer to figures shown).
At the base of the Greenhouse place a W01 300mm from the front of the Greenhouse and place another at 1725mm.
Predrill the holes using a 6mm diameter drill and screw fix the brackets in place being careful not to over tighten. Repeat
the process on the opposite side of Greenhouse.
Ensure the shading material
does not rub on the screw heads.
2
NO.Qty.
PART
4
S01
M6X10 8
L02A
L03B
L03A
W01
W02
W03
W04
4
4
4
4
M01
M6 8
6
Z02
4X16
3
8
Z01
5X16
W05 5
W06 4
W01
7

3
9
10 10 10
9
W02 L02A
8
8
8Shading Cloth
IMPORTANT!
Pay attention to this small hole which
should face up and to the right side.
Insert the W02 part into L02A at each end of the shading rod. Then assemble the rope and
spring tensioner to hold the shade cloth firmly in place. It is important the shading material is
taut over the Greenhouse. Repeat the process on the opposite side of Greenhouse.
W04
W03 W01
W06

4
L03A
L03B
W05
L02A
Z02
11 12
L03A L03B
Z01
S01
M01
13 15
L02A 14
11 11
12
12
14
14
15 15
13
13
Assembly instructions for 4m shading kit
Ridge brackets (L03A) and Eave brackets (L03B) are to be placed 300mm from the end of each Greenhouse ridge and
eave profile. Drill 8 holes through L03A into the ridge frame and also drill 8 holes through L03B into the gutter/eave profile
(refer to figures shown).
At the base of the Greenhouse place a W01 300mm from the back of the Greenhouse and place another at 1725mm.
Predrill the holes using a 6mm diameter drill and screw fix the brackets in place being careful not to over tighten. Repeat
the process on the opposite side of Greenhouse.
Ensure the screws (Z02) are facing inwards to prevent the shading
material from rubbing on the heads of the screws.
，
W01

5
17
19
17
17
W05
L02A
Z02
16 16
16 Shading Cloth
IMPORTANT!
Pay attention to this small hole which
should face up and to the right side.
Insert the W02 part into L02A at each end of the shading rod. Then assemble the rope and spring
tensioner to hold the shade cloth firmly in place. It is important the shading material is taut over the
Greenhouse. Repeat the process on the opposite side of Greenhouse.
PLEASE NOTE: If your Grange Greenhouse exceeds 4mL and requires additional 2mL Shading modules the W05
joiners are not provided. It is only necessary to join each 4m section.
18
19
17 18
19
20
20
20
J01
20
20
20
20
20
20
W04
W03 W01
W06
18
W02 L02A