Acnodes RK12 Series User manual

Rack Consoles
1U Rackmount Keyboard Drawer
104-Key Keyboard with Touchpad / Trackball
400mm Short-Depth Rackmount Design
RK12XX
All rights reserved. Product description and product specifications are subject to change without notice.
For latest product information, please visit Acnodes’ website at www.acnodes.com.
14628 Central Ave. Chino, CA 91710 Tel: [phone]
Fax: [phone]
© Copyright 2020 Acnodes Corp.
Installation Guide

Mounting bracket x 2 pcs
M6*15mm screw x 8 pcs
M6 cage nut x 6 pcs
M6 washer x 8 pcs
1
2
3
4
RK-1e / RK-1b
Package Content
Structure Diagram & Dimension
123 4
Package Contents
Install Into Rack
Step 1
Step 2
■Pick up the LCD keyboard drawer.
■Insert the LCD keyboard drawer into the mounting
bracket.
■Pull and hold the left and right black arrow buttons
that is on each slide of the LCD keyboard drawer to
unlock and push the chassis to the end.
■Attach the left and right mounting bracket to
vertical mounting rails.
■Adjust the rear mounting bracket to fit your rack.
■Repeat the above steps for the other side.
■M6 screw and cup washer are provided.
Leave the screws slightly loose until you
complete the installation in Step 4.
Left Bracket
Right Bracket
Front Side
Rear Side

How to Installation "One Man" Installation Slides
Step 3
Step 4
■Tighten the screws on both sides to complete the
installation.
■Attach the left and right mounting ears of the LCD
keyboard drawers to the vertical mounting rails.
■M6 screw and cup washer are provided.