Acnodes KD 8191 User manual

User Manual
KD 8191
1U 19-inch LCD monitor Keyboard Drawer

Contents
Chapter 1 Getting Started
1.1 Important Safeguards..........................................................1
1.2 Regulatory Notice................................................................2
1.3 Package Contents...............................................................3
1.4 BeforeInstallation................................................................4
1.5 Unpacking...........................................................................4
1.6 OptionalAccessories...........................................................4
1.7 Structure Diagram...............................................................5
1.8 Installation...........................................................................6
1.9 How to Use LCD Keyboard Drawer……………..................7
1.10 How to Use the Slides........................................................8
1.11
How to Use "One Man" Installation slides .........................9
1.12 Connect to Server via USB Interface................................12
1.13 Connect to KVM via USB Interface...................................12
1.14 Connect to Server via PS/2 Interface................................13
1.15 Connect to KVM via PS/2 Interface..................................13
Chapter 2 Operation
2.1 On-screen Display Operation............................................14
2.2 On-screen Menu...............................................................15
Chapter 3 Standard Specification
3.1 Specifications....................................................................16
3.2 Keyboard & Mouse...........................................................17
Chapter 4 Optional Specification
4.1 KVM Options.....................................................................18
4.2 DVI-D Input Option............................................................18
4.3 S-Video + RCA Input Option..............................................18
4.4 S-Video + BNC Input Option.............................................19
4.5 On-screen Menu for DVI, BNC, S-Video & RCA Input ..........
....................................................................................20-21
4.6 DC power Options.............................................................22
Chapter 5 Troubleshooting...........................................................23
Chapter 6 Dimensions.......................................................................24

P
.1
1.1 Important Safeguards Chapter 1
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modifi-
cation, or failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.

P
.2
1.2 Regulatory Notice Chapter 1
Legal Information
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this document is subject to change without notice. We are not
liable for any injury or loss that results from the use of this equipment.
Safety Instructions
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned enviro-
nment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
■When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it and
the power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equip-
ment and invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service
personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equip-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

P
.3
1.3 Package Contents Chapter 1
1 5
2 3 6
4 7
1 LCD keyboard drawer x 1 pc
2 Fasteners for rear L-bracket x 4 pcs
3 330mm rear mounting L-bracket x 1 pair
* N117 / 119 series mounting depth-adjustable from 315 to 880mm
* N1417 / 1419 series mounting depth-adjustable from 140 to 710mm
4 2-in-1 USB KVM cable x 1 pc and CD-6 3-in-1 PS/2 KVM cable x 1 pc
5 User manual x 1 pc
6 Power cord x 1 pc
7 Auto switch power adapter ( for external power version) x 1pc

P
.4
1.4 Before Installation Chapter 1
■It is very important to locate the LCD Keyboard Drawer in a suitable environment.
■The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or mounted into a suitable
cabinet.
■Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
■Position LCD Keyboard Drawer with respect to related facilities.
1.5 Unpacking
The LCD keyboard drawer comes with the standard parts shown on the package contents. Check and make sure they
are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.6 Optional Accessories
1. PS/2 3-in-1 KVM cable
1.1 CD-6 6 feet
1.2 CD-10 10 feet
1.3 CD-15 15 feet
1.4 CD-33 33 feet
2. USB 2-in-1 KVM cable
2.1 CB-6 6 feet
2.2 CB-10 10 feet
2.3 CB-15 15 feet
3. SUN / iMAC USB to PS/2 adapter
3.1 SUN-31 kit
4. " One Man" installation slides
4.1 NBK-01 Single or "One Man " installation slides
* Please refer to P.9 - 11 for Installation guidelines
5. Power Cord
5.1 IEC power cord
5.2 NEMA 5-15 power cord (US)
5.3 BS 1363 power cord (UK)
5.4 CEE 7/4 power cord (German)
5.5 AS 3112 power cord (Australia)

P
.5
Chapter 1
1.7 Structure Diagram
1
2
3
6
4
7
5 8
9
1 Carry handle to release the 2-pt lock
2 2-point lock
3 LCD interchangeable module kit
4 LCD membrane
5 Adjustable rear mounting L-bracket
6 Micro switch for screen auto power off
7 Membrane switch (KVM option)
8 Keyboard interchangeable module kit
9 Mouse interchangeable module kit

P
.6
1.8 Installation Chapter 1
■Install each rear L-bracket using two fasteners shown
in Figure 1.
■Leaving the fasteners slightly loose.
Figure 1. Installing the rear L-bracket to the LCD keyboard drawer.
■Measure the front and rear mounting depth of the
rack.
■Align each rear L-bracket to a suitable length and
tighten the fasteners shown in Figure 2.
Figure 2. Aligning the rear L-brackets to a suitable length for the rack.
■Fix the LCD keyboard drawer into the rack.
* Hardware (screws and cage nuts) for fixing the
mounting bracket to the rack is not provided.
Figure 3. Fixing the LCD keyboard drawer into the rack.

P
.7
1.9 How to Use LCD Keyboard Drawer Chapter 1
■Gently pull the tab toward the front of the LCD shown
in Figure 4.
Figure 4. Pulling the tab toward the front of LCD.
■Flip up the LCD to a suitable angle shown in Figure 5.
Figure 5. Flipping up the LCD to a suitable angle.
Figure 6. Operating the LCD keyboard drawer
■Operate the LCD keyboard drawer shown in Figure 6.

P
.8
1.10 How to Use the Slides Chapter 1
■A white arrow release button is located on the outside
of each slide (shown in Figure 7).
Figure 7. White arrow button.
Figure 8. Pushing the white arrow button.
■Push the white arrow button on either side of the LCD
keyboard drawer to unlock (shown in Figure 8). Avoid
pressing the red button located on either side.
■Hold down the white arrow button until the LCD key-
board drawer is located in the rack (shown in Figure 9).
Figure 9. Pushing the LCD keyboard drawer into the rack.

1.11 How to Install "One Man" Installation Slides Chapter 1
Package Contents
1
4
Model No : NBK-01
1 Mounting bracket x 2 pcs
2
5
2 3
4
6
5
6
3 7 7
Front mounting ear (left &
right) x 2 pcs
Support bracket x 4 pcs
M6 cage nut x 8 pcs
M6 washer x 8 pcs
M6*15mm screw x 8 pcs
M3.2*4.5mm screw x 14 pcs
Install the Front Mounting Ear x 2 pcs
1 ■Disassemble the standard front mounting ears carefully.
2
■Install the optional front mounting ears with M3.2*4.5mm screw x 8 pcs.
P. 9

1.12 How to Install "One Man" Installation Slides Chapter 1
Install into rack
1
■Attach the mounting bracket to vertical
mounting rails.
■Adjust the rear mouting bracket to fit your
rack.
■Repeat the above steps for the other side
Caution : Leaving the screws slightly
loose (Not release).
2
■Attach support brackets to chassis with
M3.2*4.5mm screw x 3 pcs.
■Repeat the above step for the other side.
■Pickup the chassis.
3
■Insert inner members of slides into the
already mounted internal slide members
in the rack.
■Push the white arrow button on each slide
that is installed on the LCD keyboard
drawer to unlock (Push at the same time).
Caution : Be careful when pushing the
chassis into the left and right slides. Avoid
pressing the red button located on either side
of the slide.
P. 1 0

P
.11
1.13 How to Install "One Man" Installation Slides Chapter 1
Install into rack
4
■Hold down the white arrow button and
push the chassis to the end.
■Attach left and right mounting ears to
vertical mounting rails.
■Tighten the screws on both sides.
5
■Installation completed.

P
.1
2
1.14 Connect to Server via USB Interface Chapter 1
Figure 10. Example of connecting CB-6 2-in-1 USB KVM cable to server via USB interface
1.14 Connect to KVM via USB Interface
Figure 11. Example of connecting CB-6 2-in-1 USB KVM cable to KVM via USB interface
Remarks :
■The above connection is only for the LCD keyboard without KVM switch built-in.
■For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.

P
.1
3
1.15 Connect to Server via PS/2 Interface Chapter 1
Figure 12. Example of connecting CD-6 3-in-1 PS/2 KVM cable to server via PS/2 interface
1.16 Connect to KVM via PS/2 Interface
Figure 13. Example of connecting CD-6 3-in-1 PS/2 KVM cable to KVM via PS/2 interface
Remarks :
■The above connection is only for the LCD keyboard without KVM switch built-in.
■For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
Caution : The LCD keyboard drawer is hot-pluggable, but components of connected de-
vices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and un-
plugging cables while servers and KVM are powered on may cause irreversible damage to
the servers, KVM and LCD keyboard drawer. Before attempting to connect anything to the
LCD keyboard drawer, we suggest turning off the power to all devices before connecting
them. Apply power to connected devices again only after the LCD keyboard is receiving
power. The company is not responsible for damage caused in this way.

P
.14
2.1 On-screen Display Operation Chapter 2
Membrane Switch Function
19" LCD membrane
Power light
Green = On
Orange = Power saving
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
Exit the OSD screen
Shortcut key to auto adjustment by pressing the button for 5 seconds or
Toggle analog, digital & video connection (DVI-D and video options only)

P
.1
5
2.2 On-screen Menu Chapter 2
MAIN MENU
BRIGHTNESS/CONTRAST
AUTO ADJUST
PHASE/CLOCK
H/V
POSITION
MISC
RESET
BRIGHTNESS / CONTRAST
Brightness: Adjust background black level of the screen image.
Contrast: Adjust the difference between the image background (black level) and the foreground (white level).
AUTO ADJUST
Auto Adjust: Fine tunes the video signal to eliminate waviness and distortion. A "Adjusting" message is displayed
during the process.
Auto Tune: Optimize phase, clock, position and size. An "Adjusting" message is displayed during the process.
PHASE/CLOCK
Phase / Clock: To enter into the phase & clock sub menu.
H/V POSITION
H/V Position: Align the screen image left or right and up or down.
MISC
Information: Display the current resolution, refresh rate and frequency information on the screen.
OSD Timer: Set the time duration in seconds that the OSD is visible after the last button is pressed. The factory
default is 10 seconds.
Color: Select the screen color - 5500K, 6500K & 9500K. The factory default is 9500K.
Language: Select the language in which the OSD menu is displayed -
English, Chinese (中文), Japanese (日本語), German, French, Spanish, Italian.
RESET Restore the settings to factory defaults.

P
.1
6
3.1 Specifications Chapter 3
Item Description
Form Factor 1U rack mounting on slide-out rails
LCD Manufacturer
Diagonal Size 19-inch TFT
Max. Resolution 1280 x 1024
Brightness (cd/m²) 300
Color Support 16.7 Mil.
Contrast Ratio (typ.) 1000:1
Viewing Angle (H/V) 160˚x 160˚
Display Area (mm) 376 x 301
Tr Response Time (ms) 1.3
VGA Signal Input Analog RGB, 0.7Vp-p
Sync. Type Separate H/V, Composite, SOG
640 x 350, 70Hz
720 x 400, 70Hz
640 x 480, 60 / 72 / 75Hz
800 x 600, 60 / 70 / 72 / 75Hz
1024 x 768, 60 / 70 / 72/ 75Hz
1152 x 864, 60 / 70 /75Hz
Resolution
1280 x 1024, 60 / 70 /75Hz
Plug & Play DDC EDID 1.3
Console Port (Combo)
3-in-1 DB-15 connector for VGA / keyboard / mouse
Support USB & PS/2 servers or KVM switches
Power Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption Max. 40 Watt, Standby 5 Watt
Compatibility Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
Regulation Approval FCC, CE
Environmental
Operation 0˚to 50˚C Degree
Storage -5˚to 65˚C Degree
Relative Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random vibration

P
.1
7
3.2 Keyboard & Mouse Chapter 3
Supporting layouts
keyboard integrated with
touchpad
Tkeyboard integrated with
trackball