Acnodes MKD9172D User manual

MKD9172D/9192D
1U Rackmount LCD Keyboard Drawer
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product informati on,
please visit Acnodes’web site at www.acnodes.com.
14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
User Manual
MKD9172D/9192D:1URackmount17/19”MonitorKeyboard
Drawer

MKD9172D/9192D
1U Rackmount LCD Keyboard Drawer
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product informati on,
please visit Acnodes’web site at www.acnodes.com.
14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the
contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from
the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modified or removed.
■ Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

MKD9172D/9192D
1U Rackmount LCD Keyboard Drawer
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product informati on,
please visit Acnodes’web site at www.acnodes.com.
14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
Contents
< Part. 1 > MKD9172D/9192D
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Installation
P.1
P.1 - 2
P.3
< Part. 2 > Specifications / OSD
2.1 Product Specifications
2.2 Keyboard / Mouse Specifications
2.3 On-screen Display Operation ( OSD )
P.4 - 5
P.6
P.7 - 8
< Part. 3 > Options
3.1 Audio
3.2 48V, 24V or 12VDC power
< Part. 4 > KVM Integration
http://www.acnodes.com/files/downloads/SKVM-UM.pdf
P.9
P.10
Combo
DB-15KVM
Local Remote IP
8- port
16-port
1 0 1
KP802
KP1602
1 1 0
KV802
KV1602
1 0 0
KVS801
KV1601

MKD9172D/9192D
1U Rackmount LCD Keyboard Drawer
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product informati on,
please visit Acnodes’web site at www.acnodes.com.
14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■ Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1 Disconnect the power cord.
2 Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges,please follow these steps :
1 Disconnect the power cord.
2 Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Caution : Do not sprayor apply any liquids directlyonto the monitor. Always apply the solution to your
microfiber cloth first,not directly on the parts you are cleaning.
3 Gently wipe the surface.Use as little pressure as possible.
4 Waituntil your monitor is completelydry before plugging it in and powering it up.

< Part 1 >
< 1.1 > Package Content
MKD9172D/9192D unit X 1
- Wired mini USB optical mouse X 1
- 6ft Combo KVM cable X 1
- Power cord X 1
- M6 screw, cage nut & cup washer X 8
The above package content is only for the single console models.
It varies with options such as KVM, HDMI, DVI-D, AV, audio & DC power.
< 1.2 > Structure Diagram
1 4
5
26
3 7
8
1 LCD interchangeable module kit
2 Installation Slide
3 LCD membrane
4 Microswitch
5 Membrane switch (KVM option)
6 Mini USB optical mouse
7 Keyboard interchangeable module kit
8 Carry handle to release the 2-pt lock

< 1.2 > Dimension
Front View
Side View UNIT :
mm
1mm = 0.03937 inch
Top View
Model
Product
Dimension
(W x D x H)
Packing
Dimension
(W x D x H)
Net
Weight
Gross
Weight
MKD9172D
442x 650 x 44 mm
17.4 x 25.6 x 1.73"
595 x 860 x 140
mm
23.4 x 33.9 x 5.5”
15.5
kg
34 lb
21 kg
46 lb
MKD9192D
442x 700 x 44 mm
17.4 x 27.6 x 1.73"
595 x 910 x 140
mm
23.4 x 35.8 x 5.5”
16.5
kg
36 lb
22 kg
48 lb

< 1.3 > Installation - How to install Installation Slides
Step 1
¦ Insert the left and right rear mountingbracketsinto
the LCDconsole drawer.
Step 2
¦ Measurethe depth of the front and rear mountingrails.
¦ Align each rear mounting bracketto a suitable length.
Step 3
Complete the installation
¦ Fix the LCD console drawerinto the rack.
M6 screw, cage nut & cup washerx 8 are provided.

MKD9172D/9192D
1U Rackmount LCD Keyboard Drawer
< Part 2 >
< 2.1 > Product Specifications
LCD
Panel
MKD9172D
MKD9192D
Manufactur er
Panel Size ( diagonal)
17-inch TFT color LCD
19-inch TFT color LCD
Displaypixel ( dots x lines )
1280 x 1024
1280 x 1024
Brightness ( typ. )
250
250
Contrast Ratio ( typ.)
1000:1
1000:1
Color
16.7 M
16.7 M
ViewingAngle ( L/R/U/D )
80/80/80/80
80/80/80/80
ResponseTime( ms )
5
5
Dot pitch ( mm )
0.264
0.294
DisplayArea ( mm )
337.92Hx 270.33V
376.32H x 301.05V
Surface treatment
Haze 25%, Hard-coating
Surface hardness
3H
3H
BacklightType
CCFL
CCFL
MTBF ( hrs )
50,000
50,000
Video
Connectivity
Analog
VGA
Analog 0.7Vp-p
Regulatory Safety Approval FCC & CE
Power
Power Supply
Range
Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption
Screen display ON
25W or less
Power saving mode
4W or less
Power button OFF
1W or less
14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product informati on,
please visit Acnodes’web site at www.acnodes.com.

MKD9172D/9192D
1U Rackmount LCD Keyboard Drawer
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product informati on,
please visit Acnodes’web site at www.acnodes.com.
14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
Environmental
Conditions
Operating
Temperature
0 to 50°C degree
Humidity
20~90%,non-condensing
Storage
Temperature
-5 to 60°C degree
Humidity
5~90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random
Physical
Specification
MKD9172D
MKD9192D
Product ( W x D x H)
442 x 650 x 44 mm
17.4 x 25.6 x 1.73
inch
442 x 700 x 44 mm
17.4 x 27.6 x 1.73
inch
Packing ( W x Dx H )
595 x 860 x 140 mm
23.4 x 33.9 x 5.5 inch
595 x 910 x 140 mm
23.4 x 35.8 x 5.5 inch
Net Weight
15.5 kgs / 34 lbs
16.5 kgs / 36 lbs
Gross Weight
21 kgs / 44 lbs
22kgs / 44\8 lbs
Applicable
Format
VGA Input
PC Signal
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz

< 2.2 > Keyboard / Mouse Specifications
G G keyboard
WOM-01
Wired mini USB optical mouse
option:
WOM-02
Wireless USB optical mouse
Keyforce
55 ± 5g
Travellingdistance
3 ± 0.3mm
Switch life
> 10 million life cycletime
Software support
MS Windows7 / 2008 /2003 / 2000 / XP / ME / 98 / DOC
Linux / Mac
Supporting layouts
America
EMEA
Asia
UnitedStates
United Kingdom Germany France Spain Norway
Italy Russia Switzerland Netherlands Portugal
China Japan Korea Arabia Turkey

MKD9172D/9192D
1U Rackmount LCD Keyboard Drawer
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product informati on,
please visit Acnodes’web site at www.acnodes.com.
14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
< 2.3 > On-screen DisplayOperation ( OSD )
Membrane Switch Function
Turn the monitor on or off
Display the OSD menu
Act as an Enter key to select screen setting options
Scroll through menu options and adjust
the displayed control
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Remark :All LED touch buttons in WHITE light.
The LED of Power touch button will flash continuously when there is no signal input.
1 All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power ).
2 Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power ).

MKD9172D/9192D
1U Rackmount LCD Keyboard Drawer
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product informati on,
please visit Acnodes’web site at www.acnodes.com.
14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
< 2.3 > On-screen DisplayOperation ( OSD )
OSD Configuration Page
Image:
for the brightness, contrast, color temp,red, green, and blue
Geometry:
for the autoadjust, Hposition, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance,AVLand mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer

MKD9172D/9192D
1U Rackmount LCD Keyboard Drawer
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product informati on,
please visit Acnodes’web site at www.acnodes.com.
14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
< Part 3 >
< 3.1 > Options :
- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )

MKD9172D/9192D
1U Rackmount LCD Keyboard Drawer
© Copyright 2013 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product informati on,
please visit Acnodes’web site at www.acnodes.com.
14628 Central Ave,
Chino, CA 91710
tel:[phone], fax:[phone]
< 3.2 > Options : DC Power
Model
12V
24V
48V
Input rating
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
Inputcurrent
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
2450 mA
1220 mA
Output rating
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
DC power
KVM
***
Option excludes 1 x power cord and 1 x AC power adapter