Acom eBox User manual

ACOM eBox
Ethernet Remote Control
for ACOM power amplifiers
User's Manual
Installation, Operation
and Maintenance
October 2021
OUTSTANDING HF POWER PRODUCTS

User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 2of 60 | S e c t i o n ABOUT DOCUMENTATION
October 2021
This manual is for electronic distribution mainly.
If you have it on paper and you no longer need it, please, recycle it!
The latest versions of our User's Manuals are available at
www.acom-bg.com

User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021
S e c t i o n ABOUT DOCUMENTATION | Page 3of 60
ABOUT DOCUMENTATION
All ACOM documentation (including manuals, brochures, specifications, descriptions, presentations, video
materials, etc.) are based on the latest available information at the time of creation of our documents.
As we always strive to constantly improve and update our products, ALL PRODUCTS, PRODUCT
SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE. ACOM reserves the right to make changes and
improvements at any time without further notice or obligation to notify any person or organization of such
revisions or changes, made in order to improve the reliability, function, quality and design, and/or
performance of the ACOM products and services.
Further, this User's Manual is provided AS IS and ACOM shall not be liable for possible errors contained
herein.
This manual supersedes all previous editions, which thereby become invalid.
The cover images used in the manual are illustrative only.
We are continuously striving to improve our documentation, but nobody is perfect.
And our documentation is not an exception of this rule.
Have you found any errors or would you like to suggest changes in our documentation?
Please help us by sending your suggestions to the following e-mail address:
[e-mail]
The latest versions of our User's Manuals are available at
www.acom-bg.com
We highly recommend you to use this manual in electronic form as PDF-file instead of printed version. The
PDF-file is easy to read on any computer, tablet, smart phone or other similar device. In the PDF file you
will find the necessary information very fast due to context-oriented links (marked in orange) inside the file,
including context-linked Table of Content.
To open PDF-files you can use any free PDF viewer, for example:
•Adobe Acrobat Reader DC (https://get.adobe.com/reader);
•Foxit Reader (https://www.foxitsoftware.com/pdf-reader);
•Your web browser. Web browsers like Google Chrome, Firefox and Safari all have integrated
PDF readers.

User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 4of 60 | S e c t i o n ABOUT DOCUMENTATION
October 2021
Title of Documentation
ACOM eBox Ethernet Remote Control
User's Manual
Installation, Operation and Maintenance
Type of Documentation
User's Manual
Purpose of Documentation
This manual explains Installation, Operation and Maintenance of the
ACOM eBox Ethernet Remote Control
Record of Revisions
Description
Release Date
Notes
ACOM eBox User's Manual
22.10.2021
First edition, R01
Validity
The specified data is for product description purposes only and may not be
deemed to be guaranteed unless expressly confirmed in the contract. All
rights are reserved with respect to the content of this manual and the
availability of the product.
Copyrights
© 2021 ACOM Ltd.
Copying this document, giving it to others and the use or communication
of the contents thereof without express authority, are forbidden.
Offenders will be held liable for infringement of any intellectual property
of ACOM Ltd. and all damages which may rise as a result.
Published by
ACOM Ltd.
Bulgaria | Bozhurishte 2227
Sofia-Bozhurishte Economic Zone | 6 Valeri Petrov Str.
GPS coordinates: 42.748616о| 23.209801о
Web: www.acom-bg.com
E-mail: [e-mail]
Note
This manual has been printed on chlorine-free bleached paper.

User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021
S e c t i o n ABOUT DOCUMENTATION | Page 5of 60
Contents
ABOUT DOCUMENTATION................................................................................................................................. 3
1. GENERAL INFORMATION ........................................................................................................................... 8
1.1. Introduction and Description .......................................................................................................... 8
1.2. Owner Assistance ............................................................................................................................ 9
1.3. Equipment Supplied ........................................................................................................................ 9
1.4. Features......................................................................................................................................... 10
1.5. Safety Considerations, Explicit Definitions.................................................................................... 11
2. INSTALLATION.......................................................................................................................................... 13
2.1. Unpacking and Initial Inspection ................................................................................................... 13
2.2. Power Supply................................................................................................................................. 14
2.3. eBox Location Selection................................................................................................................. 14
2.4. Connections................................................................................................................................... 15
3. POWER ON AND INDICATORS.................................................................................................................. 20
4. ON-LINE CONNECTION............................................................................................................................. 22
4.1. Connecting eBox to Your LAN Network......................................................................................... 22
4.2. Login and Authentication .............................................................................................................. 24
5. DEVICE AND AMPLIFIER SETTINGS .......................................................................................................... 26
5.1. Device (eBox) Settings................................................................................................................... 26
5.2. Amplifier Settings .......................................................................................................................... 32
5.2.1. ACOM 2000A Amplifier Settings...................................................................................... 33
5.2.2. ACOM 600S, 700S, and 1200S Amplifier Settings............................................................ 37
6. OPERATION.............................................................................................................................................. 40
6.1. Operating with ACOM 2000A amplifier......................................................................................... 40
6.2. Operating with ACOM 600S, 700S, or 1200S amplifier................................................................. 44
6.3. Amplifier monitoring..................................................................................................................... 47
6.4. Operating with ACOM amplifiers through Simple Network Management Protocol (SNMP) ....... 47
7. MAINTENANCE......................................................................................................................................... 48
7.1. Periodic Maintenance.................................................................................................................... 48
7.2. Cleaning......................................................................................................................................... 48
7.3. Reset to Factory Default Settings.................................................................................................. 48

User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 6of 60 | S e c t i o n ABOUT DOCUMENTATION
October 2021
7.4. Firmware Updates......................................................................................................................... 49
8. SPECIFICATIONS....................................................................................................................................... 50
8.1. Characteristics............................................................................................................................... 50
8.2. Storage and Shipment................................................................................................................... 51
8.2.1. Storage Environment........................................................................................................51
8.2.2. Shipping Size and Weight .................................................................................................51
8.2.3. Transportation..................................................................................................................51
8.2.4. Returning to the Service Provider ....................................................................................51
8.3. Information on Disposing and Recycling of Old Electrical and Electronic Equipment.................. 52
TERMS and ABBREVIATIONS ........................................................................................................................... 53
NOTES.............................................................................................................................................................. 57
Figures
Figure 2-1 eBox in original packaging.............................................................................................................. 13
Figure 2-2 eBox with sticked pads (bottom view)........................................................................................... 13
Figure 2-3 Power supply adapter .................................................................................................................... 14
Figure 2-4 Front panel - Connection and indicators........................................................................................ 15
Figure 2-5 Rear panel - Connections ............................................................................................................... 15
Figure 2-6 eBox to ACOM 600S, 700S, or 1200S connection .......................................................................... 16
Figure 2-7 eBox to ACOM 2000A connections ................................................................................................ 17
Figure 2-8 Front panel with Ethernet cable connected................................................................................... 19
Figure 3-1 Front panel - Connection and indicators with power on ............................................................... 20
Figure 4-1 eBox web-interface access............................................................................................................. 22
Figure 4-2 eBox viewing in Windows 10 network ........................................................................................... 23
Figure 4-3 eBox Login page.............................................................................................................................. 24
Figure 5-1 eBox SettingsDevice menu ......................................................................................................... 27
Figure 5-2 eBox Reboot page .......................................................................................................................... 28
Figure 5-3 eBox Amplifier model selection ..................................................................................................... 32
Figure 5-4 eBox Warm-up time counter.......................................................................................................... 33
Figure 5-5 eBox with ACOM 2000A connected............................................................................................... 34
Figure 5-6 eBox with ACOM 700S connected.................................................................................................. 37
Figure 6-1 Power On the ACOM 2000A........................................................................................................... 40

User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021
S e c t i o n ABOUT DOCUMENTATION | Page 7of 60
Figure 6-2 Operating of eBox with ACOM 2000A............................................................................................ 41
Figure 6-3 eBox with ACOM 2000A - Parameter 1 selection........................................................................... 42
Figure 6-4 Power On of the ACOM 700S ......................................................................................................... 44
Figure 6-5 Operating of eBox with ACOM 700S .............................................................................................. 44
Figure 6-6 eBox with ACOM 600S, 700S, or 1200S - Parameter 1 selection ................................................... 46
Figure 6-7 Amplifier monitoring ...................................................................................................................... 47
Figure 7-1 Firmware update ............................................................................................................................ 49
Figure 8-1 Packaging cardboard box................................................................................................................ 51
Tables
Table 1-1 Package contents............................................................................................................................... 9
Table 2-1 eBox to ACOM 600S, 700S, and 1200S connection cable wiring..................................................... 16
Table 2-2 eBox to ACOM 2000A connection cable wiring............................................................................... 18
Table 2-3 eBox RCU connector wiring ............................................................................................................. 18
Table 2-4 eBox LAN socket wiring.................................................................................................................... 19

User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 8of 60 | S e c t i o n GENERAL INFORMATION
October 2021
1. GENERAL INFORMATION
Congratulations on purchasing of our exclusive eBox Ethernet Remote Control device.
ACOM is pleased that you have chosen one of our products, and we will endeavor to provide you with the
information and support you need to enjoy your purchase for many years.
We urge you to read all of the following materials before you embark on operating your new ACOM eBox
Ethernet Remote Control device.
1.1. Introduction and Description
This manual explains:
•Installation
•Operation and
•Maintenance
of the ACOM eBox Ethernet Remote Control device.
ACOM eBox is an active Ethernet network device which allows you to access and control remotely the
ACOM power amplifiers via your local network or over the Internet. Of course, you have to connect eBox
to the amplifier via a special cable, first (1.3 Equipment Supplied).
The ACOM eBox is specifically designed and developed for remote control exclusively of the following
ACOM power amplifiers:
•ACOM 600S
•ACOM 700S
•ACOM 1200S and
•ACOM 2000A with its own RCU (Remote Control Unit).

User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021
S e c t i o n GENERAL INFORMATION | Page 9of 60
1.2. Owner Assistance
If assistance is needed, you should contact your local dealer first. If necessary, your dealer will contact
ACOM for additional guidance.
If you still have an issue you need to discuss with one of ACOM's specialists, the contact information is as
follows:
ACOM Ltd.
E-mail: [e-mail]
Bulgaria | Bozhurishte 2227
Sofia-Bozhurishte Economic Zone | 6 Valeri Petrov Str.
GPS coordinates: 42.748616о| 23.209801о
1.3. Equipment Supplied
The ACOM eBox Ethernet Remote Control device is shipped as package, consisting of:
Table 1-1 Package contents
Nr.
PACKAGE CONTENTS
Pcs.
1
eBox Ethernet Remote Control device (unit only)
1
2
Power supply adapter (12 VDC / 2.0 A)
1
3
Connection cable (eBox - ACOM amplifier connection)*, 1 m
1
4
Self-adhesive pads (set of 4 pieces)
1
Table 1-1 Package contents
The package is shipped in a cardboard carton.
The User's Manual is available as PDF-file only. The latest version of the User's Manual is available at
www.acom-bg.com.
NOTICE
*Please, specify your ACOM amplifier model when ordering an eBox device.
The correct information will allow us to ship the right cable for your amplifier model.
Using an inappropriate cable may cause a serious damage to the eBox device and your
amplifier!

User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 10 of 60 | S e c t i o n GENERAL INFORMATION
October 2021
1.4. Features
•Ethernet connectivity
eBox is an active Ethernet device which directly integrates ACOM power amplifiers to the Ethernet
networks (your local network or Internet). The eBox transfers commands and information forth and
back - from the operator to the amplifier and vice versa - via the Ethernet.
•Easy to operate
The administration of the eBox is done via Web-based interface specially developed for ACOM
amplifiers. You can use any personal computer running any operating system (OS). You just need to
run web browser as Chrome, Opera, Firefox, MS Edge, Safari, etc.
•Always Up-To-Date
Your eBox is always up-to-date due to its integrated function for firmware update. The newest
firmware versions are available (usually as *.bin files) at www.acom-bg.com. With just a few clicks you
can upload a new firmware to the eBox.

User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021
S e c t i o n GENERAL INFORMATION | Page 11 of 60
1.5. Safety Considerations, Explicit Definitions
The ACOM eBox Ethernet Remote Control device is intended for indoor use only.
The ACOM eBox Ethernet Remote Control device (including power supply) is designed to meet
international safety standards and complies with CE safety and electromagnetic compatibility
requirements.
The ACOM eBox power supply adapter is a device with Europlug input and is designed as low-power (less
than 2.5 A) Class II (double-insulated) device that operate at normal room temperature and do not require
a protective-earth connection.
This User's Manual contains information, warnings (signal words Danger, Warning, Caution and Notice)
and instructions, related to hazards, that should be followed by the user in order to ensure safe operation
and to keep the eBox in a safe working condition at all times.
The EXPLICIT DEFINITIONS described below apply to this User's Manual:
DANGER
These notes call attention to a procedure or instructions which, if not correctly
performed, will result in serious personal injuries and even death.
WARNING
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in serious personal injuries and even death.
CAUTION
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in minor or moderate personal injuries.
NOTICE
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in property damage or equipment damage not exclusively to
the ACOM eBox device but also to connected equipment.

User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 12 of 60 | S e c t i o n GENERAL INFORMATION
October 2021
Information notes described below apply to this User's Manual:
These notes highlight operating procedures or practices that may improve equipment
reliability and/or personnel performance, or to emphasize a concept.
ORANGE TEXT as LINKS
marks all internal links in the document between Sections, Figures, Tables, etc. for your
convenience.
The safety instructions contained in this User's Manual feature specific signal words
(Danger, Warning, Caution or Notice) and, where required, a safety alert symbol, in
accordance with actual standards ISO 3864 or ANSI Z535.
PRECAUTIONS:
CAUTION
Do not undertake on your own repairs or changes in hardware or software of the ACOM
eBox device in order not to endanger your or other's health and life and not to damage
the device and the equipment connected with it, not covered by warranty. The
manufacturer is not liable for another's actions and responsibility shall be assumed by
the doer.
NOTICE
To avoid damage (not covered under warranty) read the Section 2 INSTALLATION of this
User's Manual carefully. If you have any doubts about the installation, operation or
safety of the ACOM eBox device, please, consult your dealer.

User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021
S e c t i o n INSTALLATION | Page 13 of 60
2. INSTALLATION
2.1. Unpacking and Initial Inspection
Before you install your eBox, thoroughly read this manual.
First, carefully inspect the cardboard carton and its contents for physical damage.
ACOM ships eBox in protected container, but it cannot assure that mistreatment by
shippers will not occur. If damage is evident, notify your dealer immediately. Delay may
void the carrier's warranty.
Figure 2-1 eBox in original packaging
Figure 2-1 eBox in original packaging
Keep all packing materials for possible future eBox shipment (see Section 8.2.4 Returning to the Service
Provider).
Figure 2-2 eBox with sticked pads (bottom view)
Figure 2-2 eBox with sticked pads (bottom view)

User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 14 of 60 | S e c t i o n INSTALLATION
October 2021
2.2. Power Supply
NOTICE
In order to avoid any damage (not covered by the warranty), check carefully to be
certain that the voltage for which the eBox power supply adapter is intended
corresponds to your mains nominal voltage.
Normally, the eBox is supplied with power supply adapter as follow:
•Input: 100-240 VAC / 1.0 A max.;
•Output: 12 VDC / 2.0 A;
•Output power: 24 W max.;
•Cable length: Approx. 1.5 m;
•Power input plug type: Europlug.
Figure 2-3 Power supply adapter
Figure 2-3 Power supply adapter
If you need different power plug or plug-adapter, please, contact your dealer (see
Section 1.2 Owner Assistance).
2.3. eBox Location Selection
Position the eBox near your ACOM amplifier. You will need an easy access to the front and rear side of the
eBox for cabling and monitoring.

User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021
S e c t i o n INSTALLATION | Page 15 of 60
2.4. Connections
Connections of your eBox must be accomplished in the order described below, before you connect the
power supply adapter cable to the eBox POWER socket.
Figure 2-4 Front panel - Connection and indicators
Figure 2-4 Front panel - Connection and indicators
Figure 2-5 Rear panel - Connections
Figure 2-5 Rear panel - Connections
a) eBox to amplifier connection
Please, see Figure 2-5 Rear panel - Connections.
NOTICE
Be careful to use the correct connection cable between AMPLIFIER connector (on eBox
rear panel) and:
- ACOM 600S, 700S or 1200S amplifier RS-232 connector (on amplifier rear panel), or
- ACOM 2000A amplifier REMOTE CONTROL connector (on amplifier rear panel).
The connection cable must correspond to your amplifier model and should be specified
when you order the eBox.
Using an inappropriate cable may cause a serious damage to the eBox device and your
amplifier!

User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 16 of 60 | S e c t i o n INSTALLATION
October 2021
If you have an ACOM 600S, 700S, or 1200S amplifier, please, see Figure 2-6 eBox to ACOM 600S, 700S, or
1200S connection and Table 2-1 eBox to ACOM 600S, 700S, and 1200S connection cable wiring for correct
connection cable wiring.
It is necessary to use the original connection cable (delivered with an eBox) and connect the AMPLIFIER
connector (on eBox rear panel, see Pos. (1) below) to the amplifier RS-232 connector (on amplifier rear
panel, see Pos. (2) below).
In this case, the RCU connector (on eBox rear panel, see Pos. (3) below) remains unused.
Figure 2-6 eBox to ACOM 600S, 700S, or 1200S connection
Figure 2-6 eBox to ACOM 600S, 700S, or 1200S connection
Table 2-1 eBox to ACOM 600S, 700S, and 1200S connection cable wiring
eBox
Rear panel
Connecting cable
ACOM
600S, 700S, and 1200S
Rear panel
AMPLIFIER
connector
RS-232
connector
D-sub
connector,
15-pin,
3-row,
male
1 | GND
D-sub
connector,
15-pin,
3-row,
female
1
Not connected
-
D-sub
connector,
9-pin,
male
1 | Not connected
D-sub
connector,
9-pin,
female
2 | Pin2_A
2
Not connected
-
2 | TxD
3 | Pin3_A
3
Not connected
-
3 | RxD
4 | +10AMP
4
Not connected
-
4 | Not connected
5 | CPU_ON_A#
5
Blue
6
5 | GND
6 | RX_485_TX_P
6
Not connected
-
6 | DSR
7 | CPU_RST_A#
7
Not connected
-
7 | Not connected
8 | RCU_CPU_A
8
Not connected
-
8 | CTS
9 | CPU_RCU_A
9
Not connected
-
9 | Not connected
10 | GND
10
Black
5
Housing
11 | RS_485_TX_N
11
Not connected
-
12 | RS_485_RX_P
12
Not connected
-
13 | RS_485_RX_N
13
Not connected
-
14 | RS_232_TX
14
Red
3
15 | RS_232_RX
15
Yellow
2
Housing
Housing
Ext. shield
Housing
Table 2-1 eBox to ACOM 600S, 700S, and 1200S connection cable wiring
1
2
3

User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021
S e c t i o n INSTALLATION | Page 17 of 60
If you have an ACOM 2000A amplifier with RCU, please, see Figure 2-7 eBox to ACOM 2000A connections and
Table 2-2 eBox to ACOM 2000A connection cable wiring.
It is necessary to use the original connection cable (delivered with an eBox) and connect the AMPLIFIER
connector (on eBox rear panel, see Pos. (1) below) to the amplifier REMOTE CONTROL connector (on
amplifier rear panel, see Pos. (2) below).
In this case, the ACOM 2000A RCU (AMPL connector, see Pos. (3) below) should be connected to the eBox
RCU connector (on eBox rear panel, see Pos. (4) below) using the RCU original (existing) cable.
Figure 2-7 eBox to ACOM 2000A connections
Figure 2-7 eBox to ACOM 2000A connections
2
1
4
3

User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 18 of 60 | S e c t i o n INSTALLATION
October 2021
Table 2-2 eBox to ACOM 2000A connection cable wiring
eBox
Rear panel
Connecting cable
ACOM 2000A
Rear panel
AMPLIFIER
connector
REMOTE CONTROL
connector
D-sub
connector,
15-pin,
3-row,
male
1 | GND
D-sub
connector,
15-pin,
3-row,
female
1
-
1
D-sub
connector,
9-pin,
male
1 | GND
D-sub
connector,
9-pin,
female
2 | Pin2_A
2
-
2
2 | +5LED
3 | Pin3_A
3
-
3
3 | +5BLT
4 | +10AMP
4
-
4
4 | +10RCU
5 | CPU_ON_A#
5
-
5
5 | *CPUON
6 | RX_485_TX_P
6
Not connected
-
6 | *CPURST
7 | CPU_RST_A#
7
-
6
7 | RCU-CPU
8 | RCU_CPU_A
8
-
7
8 | CPU-RCU
9 | CPU_RCU_A
9
-
8
9 | GND
10 | GND
10
Not connected
-
Housing
11 | RS_485_TX_N
11
Not connected
-
12 | RS_485_RX_P
12
Not connected
-
13 | RS_485_RX_N
13
Not connected
-
14 | RS_232_TX
14
Not connected
-
15 | RS_232_RX
15
Not connected
-
Housing
Housing
Ext. shield
Housing
Table 2-2 eBox to ACOM 2000A connection cable wiring
Table 2-3 eBox RCU connector wiring
eBox Rear panel
RCU connector
D-sub
connector,
9-pin,
female
1 | GND
2 | +5V LED
3 | +5V BLT
4 | +10V RCU
5 | CPU-ON
6 | CPU-RST
7 | RCU-CPU
8 | CPU-RCU
9 | Not connected
Table 2-3 eBox RCU connector wiring

User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021
S e c t i o n INSTALLATION | Page 19 of 60
b) Ethernet LAN connection
Please, see Table 2-4 eBox LAN socket wiring.
Connect a standard Ethernet plug-terminated cable between eBox LAN socket (located on front panel,
RJ-45 type, see Figure 2-8 below) and your Ethernet hub/switch.
Figure 2-8 Front panel with Ethernet cable connected
Figure 2-8 Front panel with Ethernet cable connected
Table 2-4 eBox LAN socket wiring
LAN
interface
Pin Nr.
Pin name
Description
Colors (T568A pin assignment)
RJ-45 socket,
8-pin, female
(Rear panel
view)
1
Rx+
Receive Data
White -
Green
2
Rx-
Receive Data
Green
3
Tx+
Transmit Data
White -
Orange
4
Unused
-
Blue
5
Unused
-
White -
Blue
6
Tx-
Transmit Data
Orange
7
Unused
-
White -
Brown
8
Unused
-
Brown
Table 2-4 eBox LAN socket wiring
You can order standard Ethernet cable with suitable length from your local IT store.
c) Power supply connection
NOTICE
In order to avoid any damage (not covered by the warranty), check carefully to be
certain that the voltage and power input plug of the eBox corresponds to your mains.
Always connect the power adapter last and disconnect it before all other connectors.
Connect the power supply adapter cable to the eBox POWER socket (on eBox rear panel, see Figure 2-5
Rear panel - Connections).

User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 20 of 60 | S e c t i o n POWER ON AND INDICATORS
October 2021
3. POWER ON AND INDICATORS
NOTICE
Do not turn the eBox on for at least 30 minutes after unpacking it in the room where it
will be used. Pay particular attention when you move it from a very cold into a warm
place - condensation is likely and this could result in damage to the device.
NOTICE
In order to avoid any damage (not covered by the warranty), check carefully to be
certain that the voltage and power input plug of the eBox corresponds to your mains.
After following all instructions in Section 2 INSTALLATION you can insert the power supply adapter's mains
plug to the wall outlet prepared for it.
Once the device is powered the LED indicators (located on the eBox front panel) will blink a few times and
5-10 seconds later the LAN and PWR indicators will remain green lit (see Figure 3-1 Front panel - Connection
and indicators with power on).
Figure 3-1 Front panel - Connection and indicators with power on
Figure 3-1 Front panel - Connection and indicators with power on
The meanings of six LED indicators (see Figure 3-1 Front panel - Connection and indicators with power on,
Pos. (1)) on the front panel are as follow:
•LAN indicator
Lights on: The device is connected to the LAN network;
Lights blinking: A user is logged-in (see Section 4.2 Login and Authentication);
Lights off: The device is NOT connected to the LAN network;
•PWR indicator
Lights on: The device is powered;
Lights off: The device is NOT powered;
•REMOTE indicator
Lights on: The ACOM amplifier is being controlled via eBox device;
Lights off: The ACOM amplifier is NOT controlled via eBox device;
1
2