Acrosser Technology ACS-N0831FLUD User manual

1
ACS-N0831FLUD
Installation Guide
Version 1.0

2
Contents
1 Introduction to ACS-N0831FLUD……………………………… 3
1-1 Description……………………………… 3
1-2 Packing List 3
1-3 Main system
2 Procedure of Assembly/Disassembly……………………………… 4
2-1 Installing the 2.5”Hard Disk Drive(HDD)………………………... 4
2-2 Installing the Memory card…………………………………… 6
2-3 Installing Extension PCI card ……………………… 7

3
1. Introduction to ACS-N0831FLUD
The ACS-N0831FLUD is a system product mainly for ticket control, navigation,
advertising, fleet managements applications. With fanless-design & powerful Intel CPU
core, ACS-N0831FLUD can satisfy the users requirement in any application
environment. ACS-N0831FLUD has diverse physical interface in the front panel, such
as 2*10/100 LAN connectors, build-in LEDs, 4 USB Ports, four console ports, DSUB
44P port, power switch & audio output. In addition, the system provides the capacity for
extending I/O device by adding DRAM, CF card depending on users needs. Besides, the
users also can have for wireless module with antenna installed into this system.
1.1 Discrimination (included Rubber Foot)
Description AR-ES0831FL
CPU Board AR-B1831 series
Dimensions 251×165×60 (mm)
1.2 Packing List
Description Q’ty
ACS-N0831FLUD 1
Power Adapter 1
Power Cord 1
Cable (HDD/KB) 1
HDD cable 1
CD 1
Quick Guide
(AR-B1831) 1

4
1.3 Main system
(1) Dimension
(2) Outlet (front side board)

5
2. Procedure of Assembly/Disassembly
2-1 Installing the 2.5”Hard Disk Drive (HDD)
The following are instruction for installation.
1. Remove bottom door screws
2. Installing rubber on the HDD bracket

6
3. Lock HDD and Bracket use screw (4pcs)
4. Insert HDD cable to HDD
5. HDD to place at system
6. Lock bracket to case use screw
7. Lock bottom door screw

7
2-2 Installing CF card & SO-DIMM
The following are instruction for installation.
Install SO-DIMM
1. Remove bottom door screw
2. Un-install HDD
3. Install SO-DIMM
4. Re-install HDD
5. Lock bottom door screw
Install CF card
1. Remove CF bracket screw

8
2. Install CF card to CF bracket
3. Insert to CF card Hole
4. Lock CF bracket use screw