Acrosser Technology AR-V5430FL User manual

Revision: 1.0
1
Revision Description Date
1.0 Release 2009/07/24
AR-V5430FL
Installation Guide

Revision: 1.0
2
Contents
1 Introduction to AR-V5430FL……………………………………………………... 3
1.1 Specifications..………………………………………………….………….…. 3
1.2 Packing List…………………………………………………………………… 4
1.3 System Dissection ………………………………………………...…………. 5
2 Procedure of Assembly/Disassembly…………..………………………………. 7
2.1 HDD Installation .………………………...…….......................................... 7
2.2 Accessory(SO-DIMM, CF Card, SIM Card, Outline Bracket) Installation 13
2.3 GPS/GPRS/WiFi Modules Installation .………..………………….............. 17
3 Appendix …………………………………………..……………....…………….... 19

Revision: 1.0
3
1 Introduction to AR-V5430FL
AR-V5430FL is a Fan-less system product mainly for vehicles industry PC applications.
With powerful Intel CPU core & diverse memory card extension ( CF card, SO-DIM),
AR-V5430FL can satisfy the users requirements in any vehicles industry applications
environment, especially in vehicles computer fields. AR-V5430FL has diverse physical
interface in the front panel, such as GPIO’s DB15, 2*(10/100/1000Base-T) LANs, VGA/DVI
connectors, build-in LEDs, 3 USB Ports, 2 COM ports, FUSE, ATX Power Switch &Remote
Switch/ Microphone/Speak, DC inlet. In addition, the system provides the capacity for
extending I/O device by options adding GPS/GPRS/WiFi depends on users needs.
1.1 Specifications
Item Description
System AR-V5430FL
CPU Board AR-B5430 series
System Dimensions 279x176x67(mm)
1.2 Packing List
Description Quantity
AR-V5430FL 1
Terminal block (Plug) 1
Wall Mount Bracket(Including label for isolation ) 2
Compact Disk 1
SATA Power Cable 1
SATA Cable 1
KB/MS Y Cable 1
Remote Switch Cable 1
2.5”HDD Bracket (Screws-8PCS) 1
GPS External Cable (Option) 1
GPRS External Cable (Option) 1
WiFi External Cable (Option) 1
Fuse 7.5A for 24V vehicles 1

Revision: 1.0
4
System Dissection
(1)Dimensions
(2)Front Panel “I/O”
GPIO by DB15 Power-on status Speaker/Mic/Remote
COM1/COM2 LAN1/LAN2VGA
DVI
CF Card/USB/KB/MS/HDD&POWER LED
Power Switch
Fuse
USB
DC Inlet
Antenna Inlet

Revision: 1.0
5
(3)System Configuration
1
7
6
2
8
54
10
12
3
11
9
13

Revision: 1.0
6
Item Description Quantity
1 Upper Case 1
2 Bottom Case 1
3 Thermal Module 1
4 Mounting Bracket 2
5 CF Card Bracket 1
6 GPIO Board 1
7 HDD Module 1
8 GPS &GPRS Module 1
9 WiFi Module 1
10 DDRII Lid 1
11 Lock modules of bracket 4
12 GPS/GPRS/WiFi Antenna Inlet 1
13 Fuse 15A for 12V vehicles (default value) 1

Revision: 1.0
7
2 Procedure of Assembly/Disassembly
2.1 2.5” Hard Disk Installation
The following instructions will guide you to install HDD step-by-step.
1.Remove the terminal plug from the AR-V5430FL.
2. Unfasten the screw from top cover of AR-V5430FL.
Unfasten the screw!!
Remove the external power adapter!!

Revision: 1.0
8
3.Remove top cover by below photo direction.
Remove
Push
Push

Revision: 1.0
9
4.Insert the rubbers into the HDD bracket.
5.Place HDD body into HDD bracket and assemble HDD and bracket by 4 screws.
6.Insert SATA connecter and SATA power cable into HDD module.
Install the rubbers on the HDD bracket.
Screws up

Revision: 1.0
10
7.Assemble the HDD module and HDD bracket by 4 screws.
Screws up

Revision: 1.0
11
8.Place HDD module back into the case.
9.Fix HDD module to the chassis by four screws.
The installing of bracket for HDD

Revision: 1.0
12
10. Plug SATA cable and power cable into mainboard.
11. Slide the top cover into the bottom chassis.
SATA Connecter
SATA Power connecter
Pay attention to make sure top cover has been installed into the notch!

Revision: 1.0
13
12. Finish the HDD installation after fastening the screw.
Fasten the screw
Push
Push

Revision: 1.0
14
2.2 Accessory (SO-DIMM, CF card, SIM Card, Outline bracket) Installation
zInstall SO-DIMM
1.Remove the extending door by unfastening the screw.
2.Install SO-DIMM following below instructions.
Unfasten screw when installing the SO-DIMM card.
Push
Push Insert the SO-DIMM

Revision: 1.0
15
zInstall CF Card
1.Remove the extending CF’s bracket by unfastening the screws.
2. Install CF card into bracket.
3.Install CF card module back to CF socket.
The direction for installing the CF card module.
Unfasten the screws
The direction for installing the CF card.

Revision: 1.0
16
zInstall SIM Card
1.Install SIM card into the SIM socket.

Revision: 1.0
17
zInstall Outline Bracket
1. Install fasteners with case by 4 screws.
2. Install fasteners’ another side with Outline bracket by 4 screws.
3. Lock the these fasteners.

Revision: 1.0
18
2.3 GPS/GPRS/WiFi Modules Installation
1. Unfasten 2 screws to release GPS/GPRS brackets.
2. After GPS/GPRS bracket release, please install GPS/GPRS with bracket by
fastening 4 screws.
Unfasten the screws.

Revision: 1.0
19
3. Install GPS/GPRS modules into chassis by fastening 2 screws as step 1.
4. Unfasten 2 screws to release WiFi bracket.
5. After WiFi bracket release, please install WiFi with bracket by fastening 2
screws.
6. Install Wifi modules into chassis by fastening 2 screws as step 4.
Unfasten the screws.

Revision: 1.0
20
3 Appendix
Please don’t change CPU by yourself. Any disassembly and assembly behavior for the
CPU thermal module will cause unexpected damage.
Please do contact with Acrosser customer service center/FAE of changing CPU.
Please DON’T disassemble and assemble the thermal module by yourself