ACT ACTPRO-X User manual

ACTpro-XProximity and Keypad Readers
Product Overview
The ACTpro-X reader is a multi-format reader that
supports both the new ACTProx range of cards
and fobs and existing HID-compatible tokens.
The ACTpro-X reader is available as Proximity
only (ACTpro-X 1030/1040), Pin and Proximity
(ACTpro-X 1050), for additional security and
Pin only (ACTpro-X 1060), where proximity
cards are not required.
Main Features
Multi-format reader
Choice of proximity only, pin
and proximity or pin only
ACTProx Cards and Fobs supported
HID-compatible tokens supported
Surface or flush mount (mounting directly
on to standard electrical back box)
Indoor or outdoor installation (IP67)
Built-in buzzer
Tri-Colour LED
Operates between -20C and +50C
+5V DC to +12V DC operation
Auto detect Clock and Data or 26-bit
Wiegand Output
Robust polycarbonate housing
Vandal Resistant Cover (ACTpro-X 1030VR)
available for the ACTpro-X 1030 proximity reader.
Installation / Specification Guidelines
May be installed in exposed
outdoor conditions (IP67)
May be a maximum of 30m from the
controller when powered from +5V DC
May be up to 100m when
powered from +12V DC
Use 8 core screened cable
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
ACTpro-X Reader Schematic
ACTpro-X 1040
ACTpro-X 1050/1060
ACTpro-X 1030
ACTpro-X 1050
ACTpro-X 1040
(Entry Reader)
ACTpro-X 1030
(Exit Reader)
ACTpro 3000
Door 2 Door 1
Door 1

ACTpro-XProximity and Keypad Readers
Product Specification
ACTpro-X 1030
Operating Voltage: 5 - 12 Volts DC
Current Consumption: 40 mA
Weight: 200 grams
Operating Temperature: -20 to +50 C
Dimensions (HxWxD): 108 x 36 x 13 mm
Mounting: Surface or Flush
Installation: Indoor/Outdoor (IP67)
Cabling: 2m Pigtail lead
Product Specification
ACTpro-X 1040/1050/1060
Operating Voltage: 5 - 12 Volts DC
Current Consumption: 40 mA
Weight: 300 grams
Operating Temperature: -20 to +50 C
Dimensions (HxWxD): 110 x 100 x 35 mm
Mounting: Surface or Flush
Installation: Indoor/Outdoor (IP67)
Cabling: Connector Blocks
Product Specification
ACTProx Fob
Extremely robust with a
max read range of 8 cm
ACTProx ISO Card
Suitable for ID printing with
max read range of 10 cm
ACTProx HS Card
Half Shell Card with max
read range of 10 cm
ACTProx DUO Card
Prox and Mag stripe with max read
range of 10 cm. Suitable for ID printing
Ordering Information
Access Control Technology Unit C1, South City Business Park, Tallaght, Dublin 24, Ireland.
t: 353 (0) 1 466 2570. f: 353 (0) 1 452 0427. e: [email protected]. w: www.accesscontrol.ie
Slimline Proximity Reader
Proximity Reader
Pin & Proximity Reader
PIN only Reader
Panel Mount
Proximity Reader
Proximity Key Fob
Proximity ISO Card
Vandal Resistant Cover
* These cards and fobs are compatible with the
ACTpro-X and ACTsmart2 proximity reader range
Surface and Flush Mount accessories available
for ACTpro-x 1040/1050/1060 readers
ACTpro-X 1030
ACTpro-X 1040
ACTpro-X 1050
ACTpro-X 1060
ACTpro-X 1030 PM
ACTProx Fob-B*
ACTProx ISO-B*
ACTpro 1030 VR
Comparison chart
Feature
Mullion Style
Proximity
Keypad
5 - 12V DC Operation
Connector Block
2m Pigtail Lead
Vandal Resistant Cover
IP rating
Potted Electronics
Panel Mount
ACTpro-X
1030
Yes
Yes
Yes
Yes
Yes
IP67
Yes
ACTpro-X
1040
Yes
Yes
Yes
IP67
Yes
ACTpro-X
1050
Yes
Yes
Yes
Yes
IP67
Yes
ACTpro-X
1060
Yes
Yes
Yes
IP67
Yes
ACTpro-X
1030PM
Yes
Yes
Yes
IP67
Yes
Yes
Cabling Chart
From To Cable Restriction
Reader Controller 8 core
screened
30m at
5volts DC
100m at
12volts DC
ACTpro-X 1040
ACTpro-X 1050/1060
ACTpro-X 1030
ACTProx Fob
ACTpro-X
1030PM
ACTpro-X
1030VR
ACTProx ISO card ACTProx DUO cardACTProx HS card
Surface
mount collar
Flush
mount plate