ACTi VMGB-200 User manual

VMGB-200
User’s Manual
2019/10/21

www.acti.com
VMGB-200 USER’S MANUAL
2
Physical Description
Item
Description
1
BTS Camera
Behavior Tracking Sensor camera
2
Power Button
To power on
If the device does not automatically turn on when
the power cable is plugged in, long press the
power button for 4 seconds to power On the
device.
To power off
To power off or restart the device, long press for 2
seconds.
To shut down the device, long press for 6 seconds
(RED LED will be lit)
3
Reset Button
Press to reset the device to default settings.
4
COM Port
Reserved port to control large format display
(currently not supported)
5
USB 2.0 Ports
Use for USB keyboard, mouse, and other external
input devices
6
Memory Card Slot
Plug in microSD card for storage purposes
7
LAN Port
OUT: For internet connection
IN: For local network connection
8
HDMI Ports
To connect monitor via HDMI connection
9
Power Connector
Plug in the power cable. Device will auto power on

www.acti.com
VMGB-200 USER’S MANUAL
3
Installation
Recommended Installation
Place the device as close as possible to eye level. If tilting the device is unavoidable, limit
the tilt up to 15° only to ensure accuracy.
Place the device on the center and above the point of interest. For instance, place the
device at the top center of a screen frame. If placing on top will cause the camera to
deviate from being eye level, try to place it instead on the bottom frame of the screen.
The distance between the camera and the point of interest should be within 2 to 4
meters.
Position the camera towards the main flow of traffic.
Avoid During Installation
Dark location: Low light slows down the frame rate which affects accuracy.
Harsh backlight conditions: This may cause sever loss of contrast of captured image
Strong directional light on the face may affect detection
Outdoor shop windows, since direct sunlight, rain drops, night conditions, and vehicles in
the background may make detection less efficient.
Any element that would create visual anomalies (e.g. lights reflection on a window). If you
plan on installing on a shop window in a mall, we recommend placing the device directly
against the window.

www.acti.com
VMGB-200 USER’S MANUAL
4
User Interface
Connect and use a USB mouse to operate the device. Input the password “admin” to open the
user interface.
Left-click mouse to go to apps program list.
Right-click mouse to go back the previous page.
Back to Home Screen: Mouse over and click the Oicon to go back to the Home screen.
Apps Menu: Click the ^icon to launch the apps menu.
Network Status: Shows the network connection status.
Internet connected: Internet cable is connected (using the OUT port)
Wi-Fi connected: Connected to Wi-Fi AP

www.acti.com
VMGB-200 USER’S MANUAL
5
Calibrate the Device
Launch the Camera app to calibrate the device Behavior Tracking Sensor (BTS).

Copyright © 2019, ACTi Corporation All Rights Reserved
7F, No. 1, Alley 20, Lane 407, Sec. 2, Ti-Ding Blvd., Neihu District, Taipei, Taiwan 114, R.O.C.
TEL : [phone] FAX : [phone]
Email: [e-mail]