ActionTec V1000H User manual

Wireless VDSL
Modem Router
Model #: V1000H
User Manual
Ver 1.0
Solutions for the Digital Life™

i
Table of Contents
Introduction 1
Minimum System Requirements 1
Features 1
Getting to Know the Modem Router 3
Getting Started With the Modem Router 7
Accessing the Home Screen 7
Host Screen 10
Configuring Wireless Settings 13
Accessing Wireless Settings 13
Basic Settings 16
Wireless Security 18
Radio Setup 20
SSID Setup 22
Wireless MAC Authentication 23
WPS 24
WMM 25
802.1x 26
Configuring the Modem Router’s Utilities 27
Accessing Utilities 27
Rebooting the Modem Router 29
Restoring Factory Default Settings 29
Upgrade Firmware 31
Ping Test 32
Traceroute 33
Web Activity Log 34
Time Zone 34
ConfiguringAdvanced Setup 36
Accessing Advanced Setup Options 36
Services Blocking 39
Website Blocking 40
Scheduling Access 41
Broadband Settings 43
WAN IP Address 44
LAN IP and DHCP Settings 46
WAN VLAN 48
HPNA Settings 49
i

ii
Table of Contents
ii
QoS Settings 50
Remote GUI 52
Remote Telnet 53
Dynamic Routing 54
Static Routing 55
Admin Password 56
Port Forwarding 57
Applications 58
DMZ Hosting 60
Firewall 61
NAT 62
UPnP 62
Viewing the Modem Router’s Status 63
Accessing Wireless Settings 63
Connection Status 65
WAN Status 66
WAN Ethernet Status 67
Routing Table 68
Firewall Status 68
NAT Table 69
Wireless Status 69
Modem Utilization 70
LAN Status 71
Specifications 72
General 72
Wireless Operating Range 73
LED Indicators 73
Environmental 73
Notices 74
Regulatory Compliance Notices 74
Modifications 74
GPL (General Public License) 75
Limited Warranty 76

1
Introduction
Thank you for choosing the Actiontec Wireless VDSL Modem Router. With its
powerful wireless N radio, gigabit Ethernet switch, and WAN port, as well as its
dual-core processor and support for HPNA, the Modem Router will propel you to
new speeds as you traverse the Internet. We are sure the Modem Router will pro-
vide you with years of hassle-free performance.
Minimum System Requirements
• Active ADSL2+ service
• Computer with an 10 Mbps or 10/100/1000 Mbps Ethernet connection
• Microsoft Windows 2000, XP, Vista; Mac OS 7.1+, 8.0+, 9.0+, OS X+
• Internet Explorer (7.0 or higher), Firefox, Safari web browsers
• TCP/IP network protocol installed on each computer
Features
• Gigabit Ethernet (WAN and LAN)
• VDSL 2 access technology (backward compatible to ASDL2+/ASDL2)
• HPNA coax support
• Optional Java Virtual Machine and Java Runtime software
• TR-069 support with remote management
• TR-064 local management
1

2
Wireless VDSL Modem Router
• 64-, 128-, and 256-bit WEP/WPA/WPA2 wireless LAN security
• IEEE 802.3 Ethernet standard compliance
• Four 10/100/1000 Base-T Ethernet ports (LAN)
• One 10/100/1000 Base-T Ethernet ports (WAN)
• DHCP server option
• MAC address cloning
• QoS support, including diffserv and random early detection
• PPPoE support
• External Radius support
• Web-based configuration support
• FTP firmware upgradeable
• Web download support
• 802.11b/g/n support
• WPS support
• Advanced firewall
• ALG

3
Chapter 1 Introduction
Getting to Know the Modem Router
This section contains a quick description of the Modem Router’s lights, ports, etc.
The Modem Router has several indicator lights (LEDs) and a button on its front
panel, and a series of ports and switches on its rear panel.
Front Panel
The front panel of the Modem Router features 11 LEDs: Power, DSL, Internet,
WAN Ethernet, Internet, Ethernet (4), HPNA, USB, Wireless and WPS Push
Button.

4
Wireless VDSL Modem Router
Power
The Power LED displays the Modem Router’s current status. If the Power LED
glows steadily green, the Modem Router is receiving power and fully operational.
When the Power LED is rapidly flashing, the Modem Router is initializing. If the
Power LED is glows red when the Power cord is plugged in, the Modem Router
has suffered a critical error and technical support should be contacted. If the
Power LED is flashing red, the Modem Router is performing a firmware update.
DSL
The DSL LED illuminates when the Modem Router is connected to an xDSL line.
If the DSL LED is flashing, the Modem Router is in training for DSL service.
WAN Ethernet
When the WAN Ethernet LED glows steadily, the Modem Router is connected
to an Ethernet WAN. When it flashes, it signifies that data traffic is traveling
across the connection.
Internet
When the Internet LED glows steadily, the Modem Router is connected to the
DSL provider. When it flashes, data traffic is passing across the Modem Router.
LAN Ethernet
The LAN Ethernet LEDs illuminate when the Modem Router is connected to
another device via one of its LAN Ethernet ports. When one of the LAN Ethernet
LEDs flashes, data traffic is passing across the corresponding connection.
HPNA
The HPNA LED illuminates when the Modem Router is connected to another
device via its HPNA port. When it flashes, data traffic is passing across
the connection.

5
Chapter 1 Introduction
USB
The USB LED illuminates when a USB device is connected via the Modem
Router’s USB port. This port is not currently operational, but may be enabled in
a future firmware update.
Wireless
The Wireless LED illuminates when the Modem Router is connected wirelessly,
assuming the Modem Router’s Wireless feature is turned on.
WPS Button
The WPS button activates WPS (WiFi Protected Setup) on the Modem Router.
To use WPS, press the WPS button on the Modem Router, then, within two
minutes, press the WPS button on a device you wish to connect to the Modem
Router’s wireless network. The device will automatically join the Modem
Router’s wireless network. Repeat for other wireless devices.
Rear Panel
The rear panel of the Modem Router features 8 ports (Line, HPNA, LAN Ethernet,
WAN Ethernet, USB, and Power), as well as a Reset switches.
4
321
LAN
WAN
Ethernet Cable
(from LAN Ethernet Port
to Computer/Device)
Ethernet Cable
(from WAN Port
to ISP Connection)
Power Adapter
(from Power Port
to Wall Outlet)
Coaxial Cable
(from Coax Port
to Set Top Box)
USB1
USB Cable
(from USB Port
to Device)
USB
HPNA
Line
Reset Power

6
Wireless VDSL Modem Router
Line Port
The Line port is used to connect the Modem Router to a telephone line connection.
HPNA Port
The HPNA port is used to connect the Modem Router to an HPNA connection
via coaxial cable.
LAN Ethernet Ports (4)
The LAN Ethernet ports are used to connect computers to the Modem Router
via Ethernet cable. The Ethernet ports are 10/100/1000 Mbps auto-sensing ports,
and either a straight-through or crossover Ethernet cable can be used when con-
necting to the ports.
WAN Ethernet Port
The WAN Ethernet port is used to connect the Modem Router to a WAN via an
Ethernet cable.
USB Port
The USB port is used to connect the Modem Router to a USB device. This port is
not yet active; it may be activated in a future firmware update.
Reset Switch
Depressing the Reset switch for one second will restore the Modem Router’s
factory default settings. To reset the Modem Router, depress and hold the Reset
switch for approximately ten seconds. The reset process will start after releasing
the switch.
Power Port
The Power port is used to connect the Power cord to the Modem Router.
WARNING! Do not unplug the Power cord from the Modem Router
during the reset process. Doing so may result in permanent damage to
the Modem Router.

7
Getting Started With
the Modem Router
This chapter gives an overview of how to get started with the Modem Router,
including describing the Modem Router’s Home screen and setting up the Modem
Router through the Quick Start screens.
Accessing the Home Screen
To access the Wireless screens:
Open a Web browser. In the Address text box, type:1.
http://192.168.0.1
then press Enter on the keyboard.
2

8
Wireless VDSL Modem Router
The Modem Router’s host screen appears. Click2. Manual Setup.
The Quick Setup screen appears, with a row of large icons across the top of the 3.
screen. Click Homepage.

9
Chapter 2 Getting Started
The Modem Router’s Home screen appears.4.
Icon Bar
At the top of the Home screen is the Icon Bar. Here, you can quickly access the
other four main sections of the Modem Router’s firmware by clicking on the appro-
priate icon: Status; Quick Setup, Wireless Setup; Utilities; and Advanced Setup.
Clicking the Home icon in any other firmware screen generates the Home screen.
Internet Services
On the right side of the screen is the Internet Services menu, where there is a series
of four Actiontec links (Actiontec, Actiontec Store, Actiontec How To Zone, and
Actiontec Support) that can help you get the most out of the Modem Router.
Home Network Map
The Home Network map on the Home screen is a graphical representation of the
Modem Router’s network, including how it is connected to the ISP, all devices con-
nected to it through its networks, and the state of the firewall.

10
Wireless VDSL Modem Router
Host Screen
The Modem Router’s Host screen is the first one you will see when connecting to
the Modem Router. It contains four options: Auto Configure Your Modem, From
Provider List Setup Option, Manual Setup, and Log into My Device.
Auto Configure Your Modem
Selecting this option generates a procedure wizard that guides you through auto-
matically connecting the Modem Router with your ISP.
From Provider List Setup Option
Selecting this option generates a procedure wizard that guides you through con-
necting the Modem Router with an ISP that appears on the list that appears. Only
ADSL customers can access this option.

11
Chapter 2 Getting Started
Manual Setup
Selecting this option takes you to the Quick Setup screen. To perform a quick setup:
In the first Quick Setup screen, follow the onscreen instructions, then click 1. Next.
Another Quick Setup screen appears. Select the WAN interface you are using 2.
from the WAN Interface drop-down list.
Select the protocol used by your ISP by clicking in the appropriate radio but-3.
ton. If PPPoE or PPPoA was selected, enter the PPP username and password in
the text boxes that appear.
Click4. Apply to save your changes.

12
Wireless VDSL Modem Router
Log Into My Device
Selecting this option generates a screen asking for your username and password.
After entering them correctly, the Home screen appears, where you can access the
Modem Router’s graphical user interface.

13
Configuring
Wireless Settings
This chapter explains the options provided in the Wireless section of the Modem
Router’s firmware, including setting up wireless security and WPS.
Accessing Wireless Settings
To access the Wireless screens:
Open a Web browser. In the Address text box, type:1.
http://192.168.0.1
then press Enter on the keyboard.
3

14
Wireless VDSL Modem Router
The Modem Router’s host screen appears. Click2. Manual Setup.
The Quick Setup screen appears, with a row of large icons across the top of the 3.
screen. Click Wireless Setup.

15
Chapter 3 Wireless Settings
The Wireless Setup screen appears, with list of options on the left side of4.
the screen.
The rest of this chapter explains the options found in the menu on the left side of
every wireless settings screen.

16
Wireless VDSL Modem Router
Basic Settings
Click Basic Settings from any Wireless screen to generate the Basic Settings
screen. This screen displays step-by-step instructions to set up a secure wireless
network with the Modem Router.
To configure the basic wireless settings of the Modem Router:
Enable the wireless radio of the Modem Router by clicking in the Enable radio1.
button to activate it.
If needed, change the name of the Modem Router’s wireless network by enter-2.
ing a new one in the Network Name text box. Otherwise, you can use the one
that is already entered the the text box. You should write this name down, so
that you can refer back to it later, when connecting other wireless devices (such
as smartphones or laptop computers) to the Modem Router’s wireless network.

17
Chapter 3 Wireless Settings
If needed, change the channel on which the Modem Router’s wireless network3.
will operate once it is activated. In the U.S., wireless networks can operation on
channels 1 through 11. If your network is not working properly because of out-
side interference, you can change it to another channel here. Also, if you select
the Auto Detect option, the Modem Router will automatically select a channel.
Activate wireless security by clicking in the radio button next to WPA/WPA2. 4.
This type of wireless security is the recommended choice, and will secure the
Modem Router’s wireless network against outside intruders who try to gain
access to the wireless network without your knowledge.
Enter a pre-shared key (PSK) in the text box next to Pre-Shared Key (PSK) for 5.
Home Network. A PSK is the password that other wireless devices will need to
join the Modem Router’s wireless network. It must be at least 8 characters long,
and is made up of numbers and letter. Once you create a PSK, write it down for
future reference.
Click6. Apply. The Modem Router’s wireless network is now on and other wire-
less devices can join it.