adairs HR ARLO DINING CHAIR User manual

ASSEMBLY INSTRUCTIONS
HR ARLO DINING CHAIR
www.adairs.com.au
www.adairs.com.nz
Page 1 of 2
Please read below instructions carefully.
Remove all wrapping material, staples and packing straps from the carton.
See Hardware and Parts List & check you have all parts before you start assembling.
Place all furniture parts on a clean and flat soft surface, such as carpet or rug to prevent the item from being scratched.
FOR ASSEMBLY
There are 2 x Screw Lengths that must be used in correct holes (screws A & B).
Please check instructions carefully A & B screw lengths are different.
Step 1: On a soft surface, place the seat pad upside down so that you can easily see the
pre-drilled screw holes
Step 2: Place the legs in position and use the allen key provided to tighten
screws A & B to base
HARDWARE LIST
PARTS INCLUDED
1.SEAT PAD : 1 PC
2.LEG BRACKET : 1 PC
A.SCREW M6x20mm : 2 PC
B.SCREW M6x25mm : 2 PC
C.ALLEN KEY : 1 PC

www.adairs.com.au
www.adairs.com.nz
Page 2 of 2
ASSEMBLY INSTRUCTIONS
HR ARLO DINING CHAIR
① ②
A
A
C
B
B
1
2
ADJUST FEET WHERE REQUIRED TO
ENSURE CHAIR SEATS EVENLY ON FLOOR