adairs BALLINA User manual

Page 1of 2
ASSEMBLY INSTRUCTIONS
BALLINA SIDEBOARD
________________________________________________________________________________________
Please read instructions carefully. Remove all wrapping material, staples and packing straps from the carton. See Hardware and
Furniture Parts List for guidance. Be sure you have all parts before you start assembling. Place all wooden furniture parts on a clean
and flat soft surface, such as carpet or rug to prevent from being scratched.
PARTS INCLUDED
1. TOP : 1 Pc
2. LEG : 2 Pcs
3. SHELF : 1 Pc
HARDWARE LIST
A. BOLT : 6 Pcs
B. ALLEN KEY : 1 Pc
C. WASHER : 6 Pcs
FOR ASSEMBLY
-First, check the content to make sure that nothing is missing.
-Sort out the parts and fittings as shown, assemble product step by step.
-It is preferable to rest the product on a soft surface to avoid damage during assembly. Two people
are needed to turn this unit upside down, please take care whilst doing this.
-Do not over tighten screws and fittings.
-Re-tighten all screws and fittings periodically.
www.adairs.com.au
www.adairs.co.nz

Page 2of 2
www.adairs.com.au
www.adairs.co.nz
STEP 3
STEP 1
STEP 2
3. SHELF