adairs TUCSON User manual

Please read instructions carefully. Remove all wrapping material, staples and packing straps from the carton. See Hardware and
Furniture Parts List for guidance. Be sure you have all parts before you start assembling. Place all wooden furniture parts on a
clean and flat soft surface, such as carpet or rug to prevent from being scratched.
PARTS INCLUDED
HARDWARE LIST
FOR ASSEMBLY
-First, check the contents to make sure that nothing is missing.
-Sort out the parts and fittings as shown, assemble product step by step.
-It is preferable to rest the product on a soft surface to avoid damage during assembly.
-Do not overtighten screws and fittings.
-Re-tighten all screws and fittings periodically.
Page1 of 5
: 1pc
: 2pcs
www.adairs.com.au
www.adairs.co.nz
: 2pcs
1. CABINENT
2. LEG
3. BRACE PART
TUCSON SIDEBOARD
4. SHELF : 1pc
5. SHELF : 1pc
6. SHELF : 1pc

Page 2 of 5
STEP 1
www.adairs.com.au
www.adairs.co.nz
STEP 2
TUCSON SIDEBOARD
E x 4
STEP 4
F x 4G x 4H x 4
I x 1
J
STEP 3
xxx x 1
x 4
J
J
J
J
K x 12

Page 3of 5
STEP 5
www.adairs.com.au
www.adairs.co.nz
STEP 6
TUCSON SIDEBOARD

It is STRONGLY RECOMMENDED that you ANCHOR this product .
Toppling furniture can cause serious injuries and death.
This product has been fitted with an anchor bracket. To prevent your furniture from
tipping forward it is strongly recommended that you securely attach this product to a
wall or other solid surface, using the anchor straps/brackets provided and appropriate
fixings.
IMPORTANT:
Regularly check that anchors are securely maintained.
Use safety drawer locks to prevent children climbing.
Stability of tall items may be affected by thick pile carpet or uneven floors.
Do not place unanchored televisions on furniture.
CAUTION:
For your safety when attaching the anchor fixings, please note the following:
- Check for any electrical wires or plumbing inside the wall before drilling any holes (if
you are unsure please seek professional advice from a qualified tradesperson)
- Walls are constructed from different materials, for example, masonry (solid brick) or
plasterboard lined cavity walls (hollow). It is important that you use the appropriate wall
fixings for your wall type.
- Your local hardware store will have the necessary drills and fixings and can offer
advice if needed. If in doubt, engage the services of a qualified tradesperson to install
and anchor the product.
WARNING:
www.adairs.com.au
www.adairs.co.nz
Page 4of 5

www.adairs.com.au
www.adairs.co.nz
on product
Page 5of 5