adairs ANJUNA DESK User manual

Page1of2
ASSEMBLY INSTRUCTIONS
ANJUNA DESK
________________________________________________________________________________________
Please read instructions carefully. Remove all wrapping material, staples and packing straps from the carton. See Hardware and
Furniture Parts List for guidance. Be sure you have all parts before you start assembling. Place all wooden furniture parts on a clean
and flat soft surface, such as carpet or rug to prevent from being scratched.
PARTS INCLUDED
1. TOP : 1 Pc
2. LEG : 2 Pcs
HARDWARE LIST
: 1 Pcs
: 16 Pc
A. ALLEN KEY
B. BOLT
C. WASHER : 16 Pc
FOR ASSEMBLY
-First, check the content to make sure that nothing is missing.
-Sort out the parts and fittings as shown, assemble product step by step.
-It is preferable to rest the product on a soft surface to avoid damage during assembly.
-Do not over tighten screws and fittings.
-Re-tighten all screws and fittings periodically.
www.adairs.com.au
www.adairs.co.nz

Page2of2
www.adairs.com.au
www.adairs.co.nz
STEP3
STEP1
STEP2
Warning: Two people are required to turn this
unit upside down. NOTE this item is heavy and care
should be taken when doing this. Turn the unit
upside down. Your product is ready to use
On a soft surface, such
as a rug, turn the desk
upside down Align the 2
legs with the pre-drilled
holes
Tight all the screws