adairs baby ARCHIE COT 55088 User manual

INSTRUCTIONS
IMPORTANT: PLEASE READ THE INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE.
FOR ASSEMBLY:
• Check all contents are included and no pieces are missing or broken.
• It is recommended assembly is done on a soft surface to avoid damage.
• During assembly do not overtighten screws and fitting.
• Once assembly is complete ensure all screws and fitting are tight and firm.
• Mattress is not included.
ADAIRS RETAIL GROUP
2 International Court Caribbean Business Park,
Scoresby Vic 3179 | 03 8888 4500
ARC H I E COT
PRODUCT CODE: 55088
COUNTRY OF ORIGIN: Vietnam
COMPOSITION: EU Ash & Plywood.

• Follow the manufacturer’s assembly instructions in detail to ensure the
safety features of the cot are not compromised.
• Ensure the cot is placed at a reasonable distance from curtains, blinds,
heaters and power points. *Keep cot free of any toys, cushions etc
that could be used as a foothold or present a danger of suffocation or
strangulation.
• Keep medication, String, elastic or small items such as money out of
reach from any position in the cot.
WARNING: TO
ENSURE THE
SAFETY OF YOUR
COT, REGULARLY
CHECK ALL THE
CONNECTING
BOLTS MAKING
SURE THEY ARE
TIGHT.
WARNING: TO
PREVENT FALLS
OR SUFFOCATION
THE MAXIMUM
MATTRESS
THICKNESS
SHOULD NOT
EXCEED 130MM.
WARNING: TO
PREVENT FALLS,
THE MATTRESS
BASE OF THIS
COT SHOULD
BE ADJUSTED
TO THE LOWEST
POSITION BEFORE
THE CHILD CAN
SIT UP.
CARE INSTRUCTIONS:
• Clean furniture by lightly wiping the surface with a soft dampened cloth.
• Do not use strong house hold cleaners and avoid using hot liquids.
• Avoid contact with sharp edges or objects.
• Do not expose future to strong sunlight, direct heat sources, extreme
changes in temperature or moisture.
• When moving the furniture, lift into piece do not drag.
*If you are experiencing a problem with this product please contact the
Adairs Retail Group via the following available methods.
1300 783 005
[e-mail]
adairs.com.au/adairs.co.nz
ARC H I E COT
AUSTRALIA AND NEW ZEALAND (AS/NZS 2172:2013)
RECOMMENDED MATTRESS SIZE 1300mm x 690mm x 130mm
This cot has been manufactured for use with a mattress which measures
690mm wide by 1300mm long and 130mm in thickness. The width and
length are specified because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40mm when the
mattress is pushed to one side or end, and 20 mm when the mattress is
centred in the cot. This is to minimise the risk of a child’s limb becoming
caught in the gap. The thickness of the mattress has been specified to
ensure that the depth of the cot is greater than 500mm with the mattress
base in the lower position to minimise the risk of a child climbing or falling
out of the cot.