adairs AXTON User manual

Page 1of 2
ASSEMBLY INSTRUCTIONS
AXTON 3 DOOR SIDEBOARD
________________________________________________________________________________________
Please read instructions carefully. Remove all wrapping material, staples and packing straps from the carton. See Hardware and
Furniture Parts List for guidance. Be sure you have all parts before you start assembling. Place all wooden furniture parts on a clean
and flat soft surface, such as carpet or rug to prevent from being scratched.
PARTS INCLUDED
1. TOP : 1 Pc
2. LEG : 2 Pcs
HARDWARE LIST
A. BOLT : 8 Pcs
B. ALLEN KEY : 1 Pc
C. WASHER : 8 Pc
FOR ASSEMBLY
-First, check the content to make sure that nothing is missing.
-Sort out the parts and fittings as shown, assemble product step by step.
-It is preferable to rest the product on a soft surface to avoid damage during assembly.
-Do not over tighten screws and fittings.
-Re-tighten all screws and fittings periodically.
www.adairs.com.au
www.adairs.co.nz

Page 2of 2
www.adairs.com.au
www.adairs.co.nz
STEP 3
STEP 1
STEP 2
Warning: - Two people are required to
turn this unit upside down. NOTE this item
is heavy and care should be taken when
doing this. Turn the unit upside down
onto a soft surface, such as a rug