addlink AddGame SPIDER S Series User manual

AddGame
SPIDER S/X Series Desktop Memory
Installation Guide

SPIDER S/X
Series
Installation
Guide
Introduction
Important Notice
Installation Process
Troubleshooting tips
Introduction
AddGame SPIDER S and SPIDER X series are the ultra-high-
performance gaming DRAM module. They build with the finest
components, feature with pure premium aluminum for faster heat
dissipation allowing gamers and PC enthusiasts to build their own
high-performance PCs
SPIDER S5/4
SPIDER X5/X4

Important Notice
1. Before the installation process, please review the warranty
policy and system's owner's manual provided by the PC
manufacturer to ensure you follow proper procedures to install
your DRAM module.
2. To prevent your module from being damaged by static electricity,
please touch an unpainted metal surface on your PC's frame
before installation.
3. Wear gloves or an ESD wrist strap when handling.
4. Please do not use this product in a wet environment. Make suer
that you are working in static-safe environment.
5. Do not grab packages; hold only the edge of the Module.
6. Please do not disassemble or reassemble the heatsink; if the
product has been disassembled and damaged by the user, all
warranties will be void.
7. Please do not insert SPIDER 4/X4 into a DDR5 slot; SPIDER
S5/X5 is not backward compatible with the DDR4 module.
SPIDER S/X
Series
Installation
Guide
Introduction
Important Notice
Installation Process
Troubleshooting tips

Required Tools & Prepare
1, Memory Module(s) and your computer
2. A Screwdriver (For removing the cover on your computer)
3. Your motherboard/computer’s owner’s manual
Installation Process
1, Turn off your computer system.
2. Unplugging the power code from your computer.
3. Remove the computer cover
4. Touch an unpainted metal surface on your computers’ frame or
use a grounded antistatic wrist strap to prevent electrostatic
discharge (ESD)
5. Locate your DRAM Module
This slot is usually easy to find in your motherboard. Please refer to
your owner’s manual for the exact location, as every system looks
slightly different.
SPIDER S/X
Series
Installation
Guide
Introduction
Important Notice
Installation Process
Troubleshooting tips

6. Press Down on the lock/ejector tabs.
The tabs are located at both ends of the memory socket.
7. Insert your new memory module(s) align the module notch(es0
and key(s) along with the socket notch(es) and key(s) for proper
installation.
8. Press the memory into the socket until the tabs snap into place.
You’ll hear a click when the memory is secured.
SPIDER S/X
Series
Installation
Guide
Introduction
Important Notice
Installation Process
Troubleshooting tips

Troubleshooting tips
1. If you have trouble with your new RAM to boot up your system,
check these things first.
•Make sure your system's chipset and CPU support the memory
speed and capacity (Please review the system's owner's
manual).
•Check the power cords to ensure your motherboard/PC has an
adequate power supply.
•Try removing the module and replacing it again.
•Press harder when inserting modules into the memory slot.
•Make sure the notches in your module are lined up with the
keys in the slot.
•Ensure the DRAM is secretly seated.
•Try cleaning the dust on the memory module and socket.
SPIDER S/X
Series
Installation
Guide
Introduction
Important Notice
Installation Process
Troubleshooting Tips

SPIDER S/X
Series
Installation
Guide
Introduction
Important Notice
Installation Process
Troubleshooting Tips
2. If you can see memory in BIOS but can’t enter Windows
OS.
•Press F2 or Delete enter to BIOS
•Find Exit
•Click load Optimized Defaults
•Save the setting in BIOS
•Reboot your system

3. If the system won’t boot properly after the installation of the
memory.
•Turn off your system.
•Unplugging the power code from your computer.
•Press the power button to clear any capacitors.
•Refer to your motherboard’s manual to find the CMOS
button.
•Press and hold the CMOS button for 10~20 seconds.
•Reboot your system.
SPIDER S/X
Series
Installation
Guide
Introduction
Important Notice
Installation Process
Troubleshooting Tips

SPIDER S/X
Series
Installation
Guide
Introduction
Important Notice
Installation Process
Troubleshooting Tips
-Wait for 5~10 minutes, then install the CMOS battery.
-Reboot your system
-You also can remove the CMOS battery on your
motherboard; most of the CMOS battery is a CR2032
battery, a coin-sized battery as shown below.

HEADQUARTER
6F., No. 300, Ruiguang Rd., Neihu Dist.,
Taipei City 114, Taiwan (R.O.C.)
CONTACT INFORMATION
TEL :[phone]
FAX :[phone]
www.addlink.com.tw