AddPac VoiceFinder AP1002 User manual

VoiceFinder AP1002
VoIP Gateway
Installation Guide
Release 1.0
June. 2003
AddPac Technology Co., Ltd.
2/ 3F, Jeong-Am Bldg, Kangnam-Gu,
Seoul, Korea. Zip 135-080
Phone [phone]
Fax [phone]
E-mail: [e-mail]
http://www.addpac.com

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
2
[Contents]
About This Guide
Chapter 1. VoiceFinder AP1002 VoIP Gateway Overview ......................................................................10
Introduction to VoiceFinder AP1002 VoIP Gateway........................................................................10
Main Features .....................................................................................................................................12
Hardware Description ...................................................................................................................12
Voice over IP Service....................................................................................................................13
IP Routing Protocols .....................................................................................................................13
Network Managements .................................................................................................................14
Security Functions ........................................................................................................................14
Operation and Managements .......................................................................................................15
Other Scalability Features.............................................................................................................15
Hardware Configuration and Network Interfaces ...........................................................................16
VoiceFinder AP1002 Gateway Part & Description........................................................................16
Front View of AP1002 ...................................................................................................................16
Rear View of AP1002....................................................................................................................18
Network Interface..........................................................................................................................20
Voice Processing Interfaces .........................................................................................................21
Chapter 2. Before Installation ...................................................................................................................22
Installation Requirements .................................................................................................................22
Electrical Requirements ................................................................................................................22
General Requirements..................................................................................................................23
Network Connection Requirements .................................................................................................24
Necessaries ..................................................................................................................................24
Ethernet Port .................................................................................................................................25
RS-232C Serial Console Port .......................................................................................................25
Chapter 3. Gateway Installation................................................................................................................26
Unpacking ...........................................................................................................................................26
VoiceFinder AP1002 Interfaces and Cable connection ..................................................................27
Async Serial Interface Connection................................................................................................27
Ethernet Interface Connection ......................................................................................................28
FXS Voice Interface Connection ...................................................................................................29
FXO Interface Connection ............................................................................................................30
Booting................................................................................................................................................31

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
3
Use Console terminal with HyperTerminal....................................................................................34
Chapter 4. Appendix ..................................................................................................................................40
VoiceFinder AP1002 Gateway Technical Description.....................................................................40
Cable Specification ............................................................................................................................43

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
4
[Table of Figures]
Figure 1-1: The network diagram using VoiceFinder AP1002 Gateway .....................................................10
Figure 1-2: The exterior view of VoiceFinder AP1002 Gateway ................................................................. 11
Figure 1-3: VoiceFinder AP1002 Gateway front view..................................................................................16
Figure 1-4: The rear panel images of VoiceFinder AP1002 Gateway.........................................................18
Figure 3-1: Connect VoiceFinder AP1002 Gateway and Console PC ........................................................27
Figure 3-2: Connect VoiceFinder AP1002 Gateway with WAN and normal PC..........................................28
Figure 3-3: Connect VoiceFinder AP1002 Gateway and a normal telephone ............................................29
Figure 3-4: Connect VoiceFinder AP1002 Gateway and PBX ....................................................................30
Figure 3-5: VoiceFinder AP1002 Gateway front view..................................................................................32
Figure 3-6: MS-Windows Communication Emulator HyperTerminal...........................................................34
Figure 3-7: Assign a name for the new connection .....................................................................................35
Figure 3-8: Select the interface for Console cable ......................................................................................36
Figure 3-9: COM1 Properties ......................................................................................................................37
Figure 3-10: The HyperTerminal message of VoiceFinder AP1002 Gateway.............................................39
Figure 4-1: 10Base-T RJ-45 Connector ......................................................................................................44

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
5
[Table of Tables]
Table 1-1: The Front panel LEDs of VoiceFinder AP1002 Gateway ...........................................................17
Table 1-2: The parts and description on the rear panel of VoiceFinder AP1002 Gateway..........................19
Table 3-1: VoiceFinder AP1002 Gateway package .....................................................................................26
Table 3-2: The Front panel LEDs of VoiceFinder AP1002 Gateway ...........................................................32
Table 4-1: The transferred signal and Pinout specification .........................................................................43
Table 4-2: Signal and Pinout of Direct Ethernet Cable................................................................................44

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
6
About This Guide
This chapter outlines the structure of VoiceFinder AP1002 VoIP Gateway Installation
Guide and explains the symbols and legends.
[Organization]
The VoiceFinder AP1002 VoIP Gateway Installation Guide is offered to assist the
operation VoiceFinder AP1002 VoIP Gateway. This manual is composed of 4 chapters.
Experienced users may refer directly to the related chapters. However, less
experienced users are highly recommended to thoroughly review this manual before
operation of the gateway.
zChapter 1 『VoiceFinder AP1002 VoIP Gateway Overview』provides an
introduction to the H/W and S/W of VoiceFinder AP1002 VoIP Gateway and how to
apply for the technical supports.
zChapter 2 『Before Installation』provides an explanation on the installation
environment and cable requirements along with recommendations for safe
operation of the equipment.
zChapter 3『Gateway Installation』explains the basic installation information on
connecting the gateway with cables, operating Console terminal and etc.
zChapter 4 『Appendix』includes the specification of the gateway, the cable and
etc.

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
7
For technical supports, please contact AddPac Technology Co. Ltd.
AddPac Technology Co., Ltd
2/ 3 Fl. Jeong-Am Bulding, 769-12 Yeoksam-
Dong, Kangnam-Ku, Seoul, Korea
Phone [phone]
Fax [phone]
E-mail: [e-mail]
http://www.addpac.com

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
8
The revision history of VoiceFinder AP1002 VoIP Gateway Installation Guide is as
follows.
Revision No. Date Comments Written by
Version 1.0 June 2003 1st Edition AddPac
R&D Center

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
9
[Symbols and Legends]
The symbols and legends used in this User’s Manual are as follows:
zCommands and Keywords are typed in Bold.
zVariables that require user inputs are typed in Italic.
zSquare brackets ([]) are optional values.
zKeywords that are required but need to be selected are grouped in braces ({}) and
are separated by Slashes (/).
zAngle brackets (<>) are required parameters must be inputted.
The following conventions are also used to attract the user’s attention.
Danger
Danger
This symbol signals possible danger. Misuse could result in
physical injuries. Please follow the instructions to avoid any
electronic shocks.
Warning
STOP
Warning
It warns the users to be careful with the operation. Otherwise, it
could result in hardware damage of the equipment or loss of
data.
Caution
Caution
This symbol calls for the user’s caution. Otherwise, it could result
in hardware damage of the equipment, loss of data or system
configuration.
Information
Information
This symbol indicates additional information offering detailed
information for understanding this user guide.

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
10
Chapter 1. VoiceFinder AP1002 VoIP Gateway
Overview
Introduction to VoiceFinder AP1002 VoIP Gateway
VoiceFinder AP1002 VoIP Residential Gateway offers Voice over IP service by
connecting Local Area Networks, Wide Area Network or broadband network of ADSL.
The below is the network diagram using VoiceFinder AP1002 Gateway.
Figure 1-1: The network diagram using VoiceFinder AP1002 Gateway
Information

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
11
It supports IEEE Spanning Tree Bridging function and it can be used for routing of both
small and large-scale networks.
VoiceFinder AP1002 Gateway supports inter-operability with carrier-class backbone
gateways, gatekeepers and routers along with existing AddPac VoIP gateway series
realizing easy installation and maintenance.
The below figure is the exterior view of VoiceFinder AP1002 Gateway.
Figure 1-2: The exterior view of VoiceFinder AP1002 Gateway
As a supplementary service, VoiceFinder AP1002 Gateway provides Packet Filtering
and Firewall function using Access List method. The Firewall function restricts access
to the local network from outside networks using source and destination IP address
access list information at the Network Layer (IP Layer) and at the Transport Layer
(TCP/UDP Layer).
Also, using DHCP (Dynamic Host Configuration Protocol), this equipment can assign IP
addresses to network clients automatically (DHCP server mode) and can receive a
dynamically assigned IP address from a DHCP Server (DHCP client mode).
VoiceFinder AP1002 Gateway solves the IP address shortage problem by using NAT
(Network Address Translation) protocol.

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
12
Main Features
VoiceFinder AP1002 Gateway provides high-performance Voice over IP (VoIP) solution
maintaining best voice quality with the latest voice compression algorithm and offers
high-speed Internet access service for small enterprises, government and other public
offices. It is equipped with a WAN port (10Mbps Ethernet Port) for XDSL modem
connection and up to 2 FXS and FXO voice interfaces.
Especially, VoiceFinder AP1002 Gateway is the ultimate solution for Small Medium
Enterprise (SME) environment with its superior price vs. performance ratio. It is ideal
for both enterprise users and ordinary house with high-speed Internet subscribers of
ADSL and cable modem.
Also, VoiceFinder AP1002 Gateway is easy to install and operate, even for first time
users and offers Static, RIP v1/2 and OSPF v2 routing function. It is the most
economic and effective solution for high-speed Internet access VoIP residential
gateway.
Hardware Description
VoiceFinder AP1002 Gateway offers the various network interface and ample system
memory based on latest Embedded H/W technology and system memory. The main
H/W features are as followings.
zHigh Performance WAN-to-LAN Residential VoIP Gateway
zHigh Performance LAN-to-LAN routing solution
zHigh Performance 32bit RISC Microprocessor
zStable, Fixed Network interface structure
z1-Port 10Mbps Ethernet Interface for WAN Interface (RJ45)
z1-Port 10Mbps Ethernet Interface for LAN Service (RJ45)
z2-Port FXS Voice Interface (RJ11)
z2-Port FXO Voice Interface (RJ11)
z1-Port Async Serial Interface for Console Port (RJ45)
zCompact, stylish design
zAC-DC External Power Supply Adapter
zVarious System LEDs
Information

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
13
Voice over IP Service
zVoiceFinder AP1002 Gateway supports voice and data integration service, VoIP
service.
zOffers 4-channel voice ports and offers VoIP service by interoperating with PBXs,
ordinary telephones and fax machines.
zSupports industry standard VoIP protocols such as H.323, SIP and MGCP.
zHigh performance DSP supports various voice compression algorithms such as
G.723.1, G.729.A, G.711 and etc.
zSupports various voice-processing functions of VAD, DTMF & FAX Tone auto
detection, CNG, Echo Cancellation and etc.
zSupports T.38 G3 FAX Relay.
zInteroperable with H. 323 based Gateways and Gatekeepers
zInteroperable with SIP Proxy Servers
zInteroperable with MGCs
IP Routing Protocols
VoiceFinder AP1002 Gateway supports various IP routing protocols. The main IP
routing features are followings.
zSupports various IP routing and bridging protocol
zStatic, RIP v1/v2, OSPF v2 routing protocols
zTransparent Bridging (IEEE Spanning Tree Protocol)

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
14
Network Managements
VoiceFinder AP1002 Gateway supports various network management protocols and
functions.
zStandard SNMP Agent (MIB v2), MIB II, Bridge MIB Support
zConsols function with Async. Port.
zRemote Management using Console, Rlogin, Telnet.
zTraffic Queuing
zWeb based Managements
Security Functions
VoiceFinder AP1002 Gateway supports various security functions.
zStandard & Extended IP Access List for network security function.
zEnable/Disable for Specific Protocols
zMulti-level User Account managements
zAuto-Disconnect for Telnet/Console Sessions

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
15
Operation and Managements
VoiceFinder AP1002 Gateway supports following operation and maintenance features.
zSystem Performance Analysis for Process, CPU, Connection I/F
zConfiguration Backup & Restore for APOS Managements
zDebugging, System Auditing, and Diagnostics Support
zSystem Booting and Auto-rebooting with Watchdog Feature
zData logging as various format
zIP Traffic Statistics with Accounting
Other Scalability Features
VoiceFinder AP1002 Gateway supports various supplementary service functions.
zDHCP server and relay function for easy IP management
zNAT/PAT function for effective IP management
zRemote S/W upgrade with TFTP & FTP
zIndustry standard Command Line Interface type operation
zNetwork Time Protocol (NTP)

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
16
Hardware Configuration and Network Interfaces
This chapter explains the external form and network interfaces of VoiceFinder AP1002
Gateway.
VoiceFinder AP1002 Gateway Part & Description
VoiceFinder AP1002 Gateway is made by the high intensity ABS with compact design.
The front panel of VoiceFinder AP1002 Gateway includes various LEDs indicating the
operational status of the device. On the rear panel, there is a LAN0 interface for WAN
connection and LAN1 interface for LAN connection.
Front View of AP1002
The front panel of VoiceFinder AP1002 Gateway includes various LEDs indicating the
operational status of the device. The following figure is the external form of VoiceFinder
AP1002 Gateway.
Figure 1-3: VoiceFinder AP1002 Gateway front view
Information

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
17
Table 1-1 shows the functional explanation about each LED of VoiceFinder AP1002
VoIP Residential Gateway.
Table 1-1: The Front panel LEDs of VoiceFinder AP1002 Gateway
No. LED Description
(1) POWER Power LED, display whether external power is supplied normally or not.
(Green)
LAN 0 LAN 0 LED, display the Ethernet port’s status (Green)
(2) LINK/RUN RUN LED, display whether the equipment is operated normally or not.
(Orange)
LAN 1 LINK 1 LED, display whether Ethernet ports is in use or not. (Green)
(3) LINK/RUN RUN LED, display whether the equipment is operated normally or not.
(Orange)
FXS 0/0 FXS 0/0, display whether this port is in use or not. (Yellow)
(4) PHONE 0 Display the Operation Status of the number 0 Voice Port.
FXS 0/1 FXS 0/1, display whether this port is in use or not. (Yellow)
(5) PHONE 1 Display the Operation Status of the number 1 Voice Port.
FXO 0/0 FXO 0/0, display whether this port is in use or not. (Yellow)
(6) LINE 0 Display the Operation Status of the number 0 Line Port.
FXO 0/1 FXO 0/1, display whether this port is in use or not. (Yellow)
(7) LINE 1 Display the Operation Status of the number 1 Line Port.

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
18
Rear View of AP1002
The rear side of the VoiceFinder AP1002 VoIP Gateway includes 10Mbps Ethernet
Interface for WAN/LAN interfaces, RS-232C serial port for management, and FXS/ FXO
interface ports for voice signal processing. It can also form network environment for
WAN-to-LAN routing service.
Figure 1-4 is the rear panel images of VoiceFinder AP1002 Gateway.
Figure 1-4: The rear panel images of VoiceFinder AP1002 Gateway

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
19
Also, following Table 1-2 explains the rear panel interfaces of VoiceFinder AP1002
Gateway.
Table 1-2: The parts and description on the rear panel of VoiceFinder AP1002
Gateway
No. Interface Explanation
(1) DC Power External DC Power Supply Input
(2) FXS (0/0, 0/1) 2 FXS Ports: As FXS Voice Interface Ports, Phone or Fax
Machine can be connected. (2 x RJ11)
(3) FXO (0/2,0/3) 2 FXO Ports: As FXO Voice Interface Parts, PBX or PSTN
line can be connected. (2 x RJ11)
(4) LAN0 10Mbps Ethernet Port for WAN interface (RJ45)
(5) LAN1 10Mbps Ethernet Port for LAN interface (RJ45)
(6) Console RS-232C serial port for system management (RJ45)

VoiceFinder AP1002 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 44/
20
Network Interface
VoiceFinder AP1002 Gateway supports the following network interfaces:
z1 Port 10Mbps Ethernet Interface for WAN
z1 Port 10Mbps Ethernet Interface for LAN
z1 Port RS232C Asynchronous Serial Interface
With the above network interface, VoiceFinder AP1002 Gateway can establish WAN
and LAN network supporting TCP/IP network protocol. So it can easily form VoIP
network on the broadband network of ADSL and Cable Modem. Also, the Console
port offers easy configuration of the gateway.
The next section explains the network interfaces of VoiceFinder AP1002 Gateway.
1-Port 10Mbps Ethernet WAN Interface (RJ45)
VoiceFinder AP1002 Gateway supports one (1) 10Mbps Ethernet Interface for WAN
environment formation. It is a RJ45 type standard interface.
1-Port 10Mbps Ethernet LAN Interface (RJ45)
VoiceFinder AP1002 VoIP Gateway offers one (1) 10Mbps Ethernet interface to form
Local Area Network (LAN). It is a RJ45 type standard interface.
1-Port Async. Serial Interface for Console Port (RJ45)
VoiceFinder AP1002 Gateway provides network management features using an RS-
232C asynchronous serial interface port.