ADF Web MQTT Broker User manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 1 of 29
User Manual
Revision 1.001
English
MQTT Broker
(Order Code: HD67C00-B2, HD67C00-G43-B2)
For Website information:
www.adfweb.com? roduct=HD67C00-B2
www.adfweb.com? roduct=HD67C00-G43-B2
For rice information:
www.adfweb.com? rice=HD67C00-B2
www.adfweb.com? rice=HD67C00-G43-B2
Benefits and Main Features:
Very easy to configure
ower Supply 18…35V DC
Temperature range: -40°C/+85°C (-40°F/+185°F)
For others MQTT Broker products, see also the following links:
Converter MQTT broker to
www.adfweb.com? roduct=HD67C01 (Ethernet)
www.adfweb.com? roduct=HD67C02 (M-Bus Master)
www.adfweb.com? roduct=HD67C03 (Serial)
www.adfweb.com? roduct=HD67C04 (Modbus Master)
www.adfweb.com? roduct=HD67C05 (Modbus Slave)
www.adfweb.com? roduct=HD67C06 (Modbus TCP Master)
www.adfweb.com? roduct=HD67C07 (Modbus TCP Slave)
www.adfweb.com? roduct=HD67C08 (BACnet Master)
www.adfweb.com? roduct=HD67C09 (BACnet Slave)
www.adfweb.com? roduct=HD67C10 (CA )
www.adfweb.com? roduct=HD67C11 (CA open)
www.adfweb.com? roduct=HD67C12 (DALI)
www.adfweb.com? roduct=HD67C13 (Device et Master)
www.adfweb.com? roduct=HD67C14 (Device et Slave)
www.adfweb.com? roduct=HD67C15 (DMX)
www.adfweb.com? roduct=HD67C16 (Ether et/IP Slave)
www.adfweb.com? roduct=HD67C17 (J1939)
www.adfweb.com? roduct=HD67C18 (K X)
www.adfweb.com? roduct=HD67C19 ( MEA 0183)
www.adfweb.com? roduct=HD67C20 ( MEA 2000)
www.adfweb.com? roduct=HD67C21 (PROFIBUS Master)
www.adfweb.com? roduct=HD67C22 (PROFIBUS Slave)
www.adfweb.com? roduct=HD67C23 (PROFI ET Slave)
www.adfweb.com? roduct=HD67C24 (S MP Manager)
www.adfweb.com? roduct=HD67C25 (S MP Agent)
www.adfweb.com? roduct=HD67C26 (Ether et/IP Master)
www.adfweb.com? roduct=HD67C27 (PROFI ET Master)
Do you need to choose a device? Do you want help?
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 2 of 29
I DEX:
age
INDEX 2
U DATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAM LE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 7
CONFIGURATION 7
OWER SU LY 8
LEDS 9
ETHERNET 10
MOBILE 10
RECOVERY BUTTON 11
USE OF ADFWEB DISCOVERY TOOL SOFTWARE 12
USE OF WEBSERVER 13
WEBSERVER

DEVICE INFO
15
WEBSERVER

FIRMWARE U DATE
16
WEBSERVER

USER SETTINGS
17
WEBSERVER

NETWORK SETTINGS
18
WEBSERVER

WEBSERVER SETTINGS
20
WEBSERVER

MQTT BROKER
21
MECHANICAL DIMENSIONS 26
ORDERING INFORMATIONS 27
ACCESSORIES 27
DISCLAIMER 28
OTHER REGULATIONS AND STANDARDS 28
WARRANTIES AND TECHNICAL SU ORT 29
RETURN OLICY 29
UPDATED DOCUME TATIO :
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISIO LIST:
WAR I G:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.
Revision Date Author Chapter Description
1.000 05/06/2023 Ff All First release version
1.001 04/10/2023 Ff All Revision

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 3 of 29
SECURITY ALERT:
G E ERAL I FORMATIO
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I TE DED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSO EL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CO FORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 4 of 29
EXAMPLE OF CO ECTIO :

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 5 of 29
CO ECTIO SCHEME:
Figure 1a: Connection scheme for HD67C00- 2

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 6 of 29
Figure 1b: Connection scheme for HD67C00-G43- 2

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 7 of 29
CHARACTERISTICS:
The HD67C00-B2 is a MQTT broker.
It allows the following characteristics:
Electrical isolation between Ethernet and ower Supply;
Mountable on 35mm Rail DIN;
Wide power supply input range: 18…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CO FIGURATIO :
You need “ADFweb Discovery Tool” software on your C in order to discover the device into the network and see its I address.
The configuration is made using an integrated webserver and it is used to:
Define the parameter of Ethernet interfaces;
Define the list of allowed MQTT Clients;
Define the topics’ rules;
Define connection parameters of the bridge;
Update the device.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 8 of 29
POWER SUPPLY:
The devices can be powered at 12…35V DC. For more details see the two tables below.
VDC
Vmin Vmax
12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67C00-xxx-B2 3.5
HD67C00-xxx-B2
Caution: ot reverse the polarity power

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 9 of 29
LEDS:
The device has got six LEDs that are used to give information of the functioning status. Meanings of the LEDs when the device is ON are
described in the table below. During the start-up, there is a fixed animation of the LEDs (Scrolling LEDs) that will stop as soon as the
hardware is ready.
LED ormal Mode Recovery Mode
1: Device State (green) Blinks slowly (~1Hz) Blinks quickly
2: Broker communication
(yellow) Blinks when the broker is receiving data Blinks quickly
3: Not used (yellow) OFF Blinks quickly
4: Error state (yellow) O : bridge connection is in error
OFF: No errors are present Blinks quickly
5: Link Ethernet 0 (green) O : Ethernet cable inserted
OFF: Ethernet cable not inserted
O : Ethernet cable inserted
OFF: Ethernet cable not inserted
6: Link Ethernet 1 (green) O : Ethernet cable inserted
OFF: Ethernet cable not inserted
O : Ethernet cable inserted
OFF: Ethernet cable not inserted

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 10 of 29
ETHER ET:
The Ethernet port is used for programming the device and for MQTT communication.
The Ethernet connection must be made using Connector2 and/or Connector3 of HD67C00-xxx-B2 with at least a Category 5E cable. The
maximum length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to
100 Mbps. To connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a C is
recommended the use of a cross cable.
MOBILE:
The HD67C00-G43-B2 uses LTE module. The Antenna connector is a SMA Female (‘Female Outer Shell’ and
‘Female Receptacle’) so the Antenna must have a SMA Male connector (there are two antennas for
HD67C00-G43-B2). The SIM type is Micro-Sim.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 11 of 29
RECOVERY BUTTO :
In order to recover the device in case of wrong firmware updating or any error that compromises correct functioning of the device, it is
necessary to press the BTN1. After pressing, the device will be switched in Recovery Mode and it will be possible to update again the
firmware or reset the device using the default I address 192.168.2.206 via webserver.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 12 of 29
USE OF ADFWEB DISCOVERY TOOL SOFTWARE:
To discover the device into the network and see its I Address, use the available software that runs with Windows called “ADFweb Discovery
Tool”. It is downloadable from here: www.adfweb.com/download/filefold/ADFweb_Discovery_Tool.zip.
The software works with MSWindows (X , Vista, Seven, 8, 10, 11; 32/64bit).

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 13 of 29
Figure
3
:
“Login” page
USE OF WEBSERVER:
To configure the device, it is necessary to use the integrated webserver.
Communication will be done over the HTT S protocol, so with encrypted communication.
The default I address from factory is 192.168.2.206 and the device is reachable at this url: https://192.168.2.206/
As soon as the browser is launched and connected to the I address of the device, the login page appears.
Default username and password: admin/admin.
It appears like below:

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 14 of 29
Figure
4
:
“Drawer”
When login is done, the main page with device info will appear. In the top-left corner, there will be a menu that allows to open a drawer with
all sections of the webserver.
The sections are described below:
Device info;
Firmware update;
User settings;
Network settings;
Webserver settings;
MQTT Broker.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 15 of 29
Figure
5
:
“Device Info” page
WEBSERVER  DEVICE I FO:
This section shows main info about the device.
The means of the fields for the “Device Info” section are:
In the field “Device Type” the name of the product is displayed;
In the field “Firmware version” the version of the firmware is displayed;
In the field “Serial number” the serial number is defined is defined.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 16 of 29
Figure
6
:
“Firmware update” page
WEBSERVER  FIRMWARE UPDATE:
This section is used to download and update the firmware of the device and export/import full configuration.
If required, it is possible to reset the device to Factory settings.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 17 of 29
Figure
7
:
“User settings” page
WEBSERVER  USER SETTI GS:
This section is used to change the username and/or password of the webserver.
All settings of this page can be imported or exported by pressing the related buttons.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 18 of 29
Figure 8: “Network settings” page
WEBSERVER  ETWORK SETTI GS:
This section is used to set the Network interfaces of the device.
All settings of this page can be imported or exported by pressing the related buttons.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 19 of 29
The means of the fields for the “Network settings” section are:
In the field “Interface configuration” it is possible to isolate the Ethernet interfaces (Separate Ethernet interfaces), bridge them to
act like a single interface (Single Ethernet interface) or set LTE connection (Mobile Internet);
In the field “Gateway Priority” it is possible to select the interface used for Internet connection;
In the field “Cellular” the mobile settings of the interface are defined. The parameters are:
oA N: A N for mobile connection;
oIN: IN code of the SIM card;
oUsername: user for mobile connection;
oassword: passowrd for mobile connection.
In the field “Ethernet” the I settings of the interface are defined. It is possible to:
oSet “DHC ” option;
oSet a static I Address by adding I Address, SubNet Mask, Gateway and DNS.

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
MQTT Broker
Document code: MN67C00_ENG Revision 1.001 age 20 of 29
Figure
8
:
“Webserver settings” page
WEBSERVER  WEBSERVER SETTI GS:
This section is used to update the certificate and key for TLS encryption. By default, the device has its own certificate, but it is possible to
update it to be recognized, trusted and configured in the final installation.
All settings of this page can be imported or exported by pressing the related buttons.