AMX NXF-MINI User manual

netlinx®mini-cardframe
NETLINX MINI-CARDFRAME
The NetLinx Mini-CardFrame extends the control capabilities of the AMX
NetLinx Control System to a remote area or location. Compatible with
the NI-700, NI-2000, NI-3000 and NI-4000 controllers, the Mini-CardFrame
allows the installer to add as many as four NetLinx device-specific control
cards for expanding control and automation features.
AVAILABLE PORTS & CARDS
The Mini-CardFrame works as an extension of the NI Series, housing as
many as four control cards and providing an additional number of ports
to accommodate an increasing amount of integrated devices within a
control system. The Mini-CardFrame can provide volume, IR/Serial and
RS-232 ports to control and communicate with electronic equipment with-
in a small meeting room.
POWER OF ICSNET
The Mini-CardFrame can extend control capabilities from a NetLinx sys-
tem to a remote area or location by using the ICSNet data/power bus to
communicate with a NetLinx unit positioned up to 1,000 feet away. In sit-
uations that call for additional control functions in separate areas of con-
trol, the Mini-CardFrame can be networked together using ICSNet Hubs
that connect directly to the NetLinx Master Controller.

NXF-MINI (FG2104)
• Provides four series control card slots
• Links to other NetLinx devices over the ICSNet
• Installs easily into rack or shelf, or onto wall
using supplied mounting brackets
• Accepts optional CSB bracket for cable support
and wire management
FRONT PANEL
• 1–4:
Shows LED status indicators from optional NXC
control cards
REAR PANEL
• Slots 1–4:
20-pin control card connectors
• Device:
8-position DIP switch sets the starting address
for Control Cards in the MINI CardFrame
• ICSNet:
One RJ45 connector for ICSNet interface
• PWR:
2-pin jack for +12 VDC power input
ENCLOSURE
Metal with black matte finish
MOUNTING OPTIONS
Rack, wall, or shelf mount
DIMENSIONS (HWD)
1.75" x 17.0" x 9.56"
(4.45 cm x 43.18 cm x 24.28 cm)
(width does not include mounting ears)
WEIGHT
6.2 lbs (2.8 kg)
POWER
12 VDC, 25 mA minimum
Additional power required as cards and
accessories added Includes
INCLUDED ITEMS
Two mounting brackets
One 2-pin PWR connector (41-5025)
OPTIONS
NetLinx Control Cards
CSB Cable Support Bracket (FG517)
PSN 6.5 12 VDC @ 6.5A Power Supply (FG423-41)
16
CARDFRAME #
ON
18 17 1920 14 15 12
13 98710
11
SLOT 4
2
5
6431
SLOT 3
11
16
17
19 1820 12
13
15 14 10 9 783
5
642
SLOT 1
11
16
117
20 19 18 11
13
15 14 12 10 897
SLOT 2
32
5
6411620 1819 17 13
14 12
15 8 710 9 6 53
421
ICSNet PWR
12VDC
NXF-MINI
NXF-MINI (Rear View)
19.00 [482.60]
NXF-MINI
1.75 [44.45]
NXF-MINI (Front View)
NXF-MINI (Right View)
9.56 [242.70]
17.00 [431.80]
NXF-MINI (Top View)
netlinx®mini-cardframe
ARGENTINA • AUSTRALIA • BELGIUM • BRAZIL • CANADA • CHINA • ENGLAND • FRANCE • GERMANY • GREECE • HONG KONG • INDIA • INDONESIA • ITALY • JAPAN
LEBANON • MALAYSIA • MEXICO • NETHERLANDS • NEW ZEALAND • PHILIPPINES • PORTUGAL • RUSSIA • SINGAPORE • SPAIN • SWITZERLAND • THAILAND • TURKEY • USA
ATLANTA • BOSTON • CHICAGO • CLEVELAND • DALLAS • DENVER • INDIANAPOLIS • LOS ANGELES • MINNEAPOLIS • PHILADELPHIA • PHOENIX • PORTLAND • SPOKANE • TAMPA
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
100-019-2732 © 2005 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation. AMX reserves the right to alter specifications without notice at any time.
9.56 (242.70MM)
1.75 (44.45MM)
19.00 (482.60MM)
17.00 (431.80MM)