ADLINK Technology cPCI-6510 Series User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

Advance Technologies; Automate the World.
Manual Rev. 2.02
Revision Date: November 13, 2014
Part No: 50-15071-1020
cPCI-6510 Series
Low Power 6U CompactPCI Processor Blade
with Intel®Core™ i7 and two PMC sites
User’s Manual

Revision History
Revision Release Date Description of Change(s)
2.00 2010/09/24 Initial Release
2.01 2010/11/24
Updated RTM list, Mode Switch (SW2) definition,
IPMI User Guide; added NT Mode EEPROM
programming instructions
2.02 2014/11/13 Add PMC slot -12V support note

Preface iii
cPCI-6510
Preface
Copyright 2010-14 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for ADLINK.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

iv Preface
Using this Manual
Audience and Scope
The cPCI-6510 User’s Manual is intended for hardware
technicians and systems operators with knowledge of installing,
configuring and operating industrial grade CompactPCI modules.
Manual Organization
This manual is organized as follows:
Chapter 1, Overview: Introduces the cPCI-6510, its features,
block diagrams, and package contents.
Chapter 2, Specifications: Presents detailed specification
information, and power consumption.
Chapter 3, Functional Description: Describes the cPCI-6510’s
main functions.
Chapter 4, Board Interfaces: Describes the cPCI-6510 board
interfaces, pin definitions, and jumper settings.
Chapter 5, Getting Started: Describes the installation instructions
of the cPCI-6510.
Chapter 6, Driver Installation: Describes the driver installation
procedures.
Chapter 7, Utilities: Describes the Watchdog Timer and Preboot
Execution Environment functions.
Chapter 8, BIOS Setup Utility: Describes the AMIBIOS®8 BIOS
setup utility.
Chapter 9, IPMI User Guide: Provides relevant information for
the baseboard management controller (BMC) of the Intelligent
Platform Management Interface (IPMI).
Important Safety Instructions: Presents safety instructions all
users must follow for the proper setup, installation and usage of
equipment and/or software.
Getting Service: Contact information for ADLINK’s worldwide
offices.

Preface v
cPCI-6510
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.

vi Preface
This page intentionally left blank.

Table of Contents vii
cPCI-6510
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Tables.......................................................................... xi
List of Figures...................................................................... xiii
1 Overview ............................................................................. 1
1.1 Introduction .......................................................................... 1
1.2 Features............................................................................... 2
1.3 Block Diagram ..................................................................... 3
1.4 Product List.......................................................................... 4
1.5 Package Contents ............................................................... 5
2 Specifications..................................................................... 7
2.1 cPCI-6510 Specifications..................................................... 7
2.2 I/O Connectivity ................................................................. 10
2.3 Power Requirements ......................................................... 11
2.4 Thermal Requirements ...................................................... 13
3 Functional Description .................................................... 17
3.1 Processor........................................................................... 17
3.2 Chipset............................................................................... 18
3.3 Super I/O ........................................................................... 19
3.4 Battery ............................................................................... 19
3.5 PMC/XMC Sites................................................................. 19
3.6 BIOS Recovery .................................................................. 20
4 Board Interfaces............................................................... 21
4.1 cPCI-6510 Series Board Layout - Top Side....................... 21
4.2 cPCI-6510 Series Board Layout - Bottom Side ................. 22

viii Table of Contents
4.3 cPCI-6510 SBC Front Panel .............................................. 23
4.4 Connector Pin Assignments............................................... 24
4.5 Switch and Jumper Settings .............................................. 38
5 Getting Started.................................................................. 41
5.1 Hard Drive Installation........................................................ 42
5.2 CompactFlash Card Installation......................................... 45
5.3 PMC/XMC Module Installation ........................................... 46
5.4 Installing the cPCI-6510 to the Chassis ............................. 47
5.5 Installing the RTM to the Chassis ...................................... 48
6 Driver Installation.............................................................. 49
6.1 Driver Installation Procedure.............................................. 49
7 Utilities............................................................................... 51
7.1 Watchdog Timer................................................................. 51
7.2 Preboot Execution Environment (PXE).............................. 56
7.3 BIOS Recovery .................................................................. 57
7.4 Programming NT Mode EEPROM Map ............................. 59
8 BIOS Setup Utility............................................................. 61
8.1 Starting the BIOS ............................................................... 61
8.2 Main Setup......................................................................... 64
8.3 Advanced BIOS Setup ....................................................... 65
8.4 Chipset Configuration ........................................................ 75
8.5 Boot Configuration ............................................................. 78
8.6 Security Setup.................................................................... 80
8.7 Save & Exit ........................................................................ 81
9 IPMI User Guide ................................................................ 83
9.1 Introduction ........................................................................ 83
9.2 Summary of Commands Supported by BMR-AVR-cPCI ... 83
9.3 OEM Commands Summary Table ..................................... 87
9.4 CompactPCI Address Map ................................................ 91

Table of Contents ix
cPCI-6510
9.5 Communications with IPMC............................................... 92
9.6 IPMI Sensors List............................................................... 92
9.7 Relevant Documents ......................................................... 92
Important Safety Instructions.............................................. 93
Getting Service...................................................................... 95

xTableofContents
This page intentionally left blank.

List of Tables xi
cPCI-6510
List of Tables
Table 2-1: cPCI-6510 Specifications ......................................... 8
Table 2-2: cPCI-6510 I/O Connectivity .................................... 10
Table 2-3: CompactPCI Input Voltage Characteristics ............ 11
Table 2-4: Idle Mode Power Consumption .............................. 12
Table 2-5: 100% CPU Usage Power Consumption ................. 12
Table 4-1: cPCI-6510 Front Panel Status LED Descriptions ... 23
Table 4-2: USB Connector Pin Definition ................................ 24
Table 4-3: RJ-45 Serial Port Pin Definition .............................. 24
Table 4-4: GbE Connector Pin Definitions ............................... 25
Table 4-5: DVI-I Connector Pin Definition ................................ 26
Table 4-6: DB-6920SAT SATA Connector Pin Definition ........ 27
Table 4-7: PMC Connector Pin Definitions .............................. 28
Table 4-8: XMC Connector Pin Definition ................................ 30
Table 4-9: CompactFlash Connector Pin Definition ................. 31
Table 4-10: DB-6920SAT Connector Pin Definition ................... 32
Table 4-11: CompactPCI J1 Connector Pin Definition ............... 33
Table 4-12: CompactPCI J2 Connector Pin Definition ............... 34
Table 4-13: CompactPCI J3 Connector Pin Definition ............... 35
Table 4-14: CompactPCI J4 Connector Pin Definition ............... 36
Table 4-15: CompactPCI J5 Connector Pin Definition ............... 37
Table 4-16: Mode Switch Settings ............................................. 39
Table 4-17: PMC Bandwidth/Clock Switch Settings .................. 39
Table 4-18: COM1/Debug Switch Settings ................................ 40
Table 4-19: Front/Rear VGA Selection Switch Settings ............ 40

xii List of Tables
This page intentionally left blank.

List of Figures xiii
cPCI-6510
List of Figures
Figure 1-1: cPCI-6510 Series Block Diagram .............................. 3
Figure 2-1: Core i7-610E Power Dissipation Graph (TDP 35W) 14
Figure 2-2: Core i7-620LE Power Dissipation Graph (TDP 25W) 14
Figure 2-3: Core i7-620UE Power Dissipation Graph (TDP 18W) 15
Figure 4-1: cPCI-6510 Series Board Layout - Top Side ............ 21
Figure 4-2: cPCI-6510 Series Board Layout - Bottom Side ....... 22
Figure 4-3: cPCI-6510 Series Front Panel Layout ..................... 23

xiv List of Figures
This page intentionally left blank.

Overview 1
cPCI-6510
1 Overview
1.1 Introduction
The cPCI-6510 Series is a 6U CompactPCI single board computer
in single slot width (4HP) form factor supporting 32nm Intel®
Core™ i7 SV, LV, ULV processors with integrated graphics and
ECC memory controller onboard. The cPCI-6510 provides up to
8GB of dual channel DDR3-800/1066 ECC memory soldered
onboard and implements the Mobile Intel® QM57 Express Chipset
to provide a full feature set and optimal performance per watt.
The cPCI-6510 Series provides a 64bit/66MHz CompactPCI bus,
up to two PMC sites with 64-bit/133MHz PCI-X bus supporting
rear I/O (PIM), and one PCI Express x8 XMC site (shared with
inner PMC site). Featured I/O includes four PCI Express Gigabit
Ethernet ports (two on front panel, two for PICMG 2.16), two USB
ports and a CompactFlash socket. DVI-I, COM and additional USB
ports are available on the cPCI-6510V version which also provides
a SATA connector for an onboard 2.5” SATA HDD. Optional Rear
Transition Modules provide versatile additional I/O including two
additional GbE, USB, COM, High Definition Audio, and storage
interfaces such as SATA, SCSI, and SAS with RAID support. The
cPCI-6510V supports dual independent display via two DVI or one
DVI and one VGA when accompanied by the appropriate Rear
Transition Module.
For flexibility of use, the cPCI-6510 Series can be installed in a
standard CompactPCI system slot as system master, or peripheral
slot as a PCI device. Through hardware switch setting, the
cPCI-6510 optionally supports operation in system or peripheral
slots as a standalone blade. The cPCI-6510 Series is ideally
suited for military, aviation, communication and other industrial
applications.

2Overview
1.2 Features
X6U CompactPCI SBC in 4HP width form factor
XµFC-BGA package Intel® Core™ i7 processor, up to 2.53GHz
XMobile Intel® BD82QM57 PCH (Platform Controller Hub)
XDual Channel DDR3 ECC SDRAM at 800 or 1066MHz sol-
dered onboard, up to 8GB
X64-bit/66MHz CompactPCI Interface based on PCI specifica-
tions, 3.3V and 5V signaling
XSupports operation in system slot as system master or in
peripheral slot with connectivity to CompactPCI bus* (optional
isolation from CompactPCI bus)
XDual PMC sites with 64-bit/133MHz PCI bus
XSingle XMC site with PCIe x8 lane (shared with inner PMC
site)
XUp to two DVI ports for dual independent displays
XFour PCIe Gigabit Ethernet ports, two at front, two for PICMG
2.16 or RTM
XOnboard CompactFlash socket
X2.5” SATA HDD direct connector onboard, occupies outer PMC
site
XUp to -40°C to 80°C optional extended temperature support
XRTM models available with multiple I/O options: SATA, HD
audio, COM, USB, Gigabit Ethernet, PS/2 KB/MS, PIM, SAS,
SCSI, CF, SD socket
XHardware RAID on SCSI, SAS interfaces supported (depen-
dent on RTM module)
NOTE:
NOTE:
*See “Programming NT Mode EEPROM Map” on page 59 for
instructions on how to set the PCIe-to-PCI bridge on the
cPCI-6510 to NT-mode to allow operation in a peripheral slot.

Overview 3
cPCI-6510
1.3 Block Diagram
Figure 1-1: cPCI-6510 Series Block Diagram
Front Panel
Intel® Core™ i7 DMI
J1/J2 J3/J4/J5
Pericom
PI7C9X13
PCIe x8
PCIe x4
PCIe x4
Pericom
PI7C9X13
PMC 2
PCIe x8
PCI-X 64b/133M
3x USB
Intel
82574L
Intel
82574L
GbE1 GbE2
PCIe x1 PCIe x1 TMDSA
RGB
DVI-I
TMDSB
Intel
82574L
Intel
82574L
PCIe x1PCIe x1
GbE3
GbE4
6x USB
3x SATA
HDA
5x GPIO
RTC
PCIe x4
LVDS
SIO
ITE8783
LPC
KB/MS
2x COM
COM4
BMC
COM1
2.5” HDD
SATA1
CF
SATA2
BIOS
SPI
QM57 PCH
XMC
Soldered w/ ECC, max. 4GB
Soldered w/ ECC, max. 4GB
DDR3 800/1066
PCIe
Switch PMC 1
Rear I/O
Rear I/O
PCI 64b/66M
IPMB 0/1
SATA
to IDE
SW
RGB

4Overview
1.4 Product List
Products included in the cPCI-6510 Series include:
Processor Blade
XcPCI-6510: 4HP width (single-slot) 6U CompactPCI blade
featuring single Intel® Core™i7 processor, dual channel
DDR3-800/1066 soldered onboard SDRAM with ECC,
2x PMC or 1x PMC and 1x XMC, 2x USB, 2x GbE and CF
socket
XcPCI-6510V: 4HP width (single-slot) 6U CompactPCI blade
featuring single Intel® Core™i7 processor, dual channel
DDR3-800/1066 soldered onboard SDRAM with ECC,
1x PMC/XMC, 3x USB, 2x GbE, RJ-45 COM, DVI-I, SATA
for 2.5” HDD and CF socket
Rear Transition Modules
XcPCI-R6000: 4HP width RTM with DVI-I, 2x COM, 3x USB, 2x
GbE, SCSI, 2xSATA
XcPCI-R6100: 4HP width RTM with 4x GbE, 4x USB, 2xSATA,
DVI, VGA, PS/2 KB/MS, CF & SD sockets
XcPCI-R6110: 4HP width RTM with 2x GbE, 4x USB, 3x SATA,
VGA, PS/2 KB/MS, CF, & SD sockets
XcPCI-R6200: 8HP width RTM with 2x GbE, 2x COM, 4x USB,
DVI-I, 3x SATA, Mic-in, Line-out, PS/2 KB/MS, 8x SAS
XcPCI-R6210: 4HP width RTM with 2xUSB, DVI-I, COM,
2x SATA, 2x PIM
Adapter Kit
XDB-CF-SA: CompactFlash socket kit for cPCI-R6000D &
cPCI-R6200 RTMs, including DB-6920CF adapter board, card
guide and screws to replace SATA adapter with CompactFlash
socket

Overview 5
cPCI-6510
1.5 Package Contents
The cPCI-6510 is packaged with the components listed below
(RTMs and adapter kits are optional). If any of the items in the
contents list are missing or damaged, retain the shipping carton
and packing material and contact the dealer for inspection. Please
obtain authorization before returning any product to ADLINK. The
packing contents of non-standard configurations may vary
depending on customer requests.
Processor Blade
XThe cPCI-6510 Series Processor Blade
ZCPU, RAM will differ depending on options selected
ZThermal module is assembled on the board
XRJ-45 to DB-9 cable for RJ-45 COM port (cPCI-6510V only)
X2.5” SATA HDD mounting kit, including HDD bracket,
screws for HDD, and DB-6920SAT SATA adapter card
(cPCI-6510V only)
XADLINK All-in-One CD
XUser’s manual
NOTE:
NOTE:
The contents of non-standard cPCI-6510 configurations may
vary depending on customer requests.
CAUTION:
This product must be protected from static discharge and phys-
ical shock. Never remove any of the components except at a
static-free workstation. Use the anti-static bag shipped with the
product when putting the board on a surface. Wear an
anti-static wrist strap properly grounded on one of the system's
ESD ground jacks when installing or servicing system compo-
nents.