ADLINK Technology DMI-1040 User manual

Manual Rev.: 1.0
Revision Date: April 15, 2021
Part No: 50M-00018-1000
DMI-1040
10.4" Driver Machine Interface
User’s Manual

ii Revision History
Revision History
Revision Release Date Description of Change(s)
1.0 2021-04-15 Initial release

Preface iii
DMI-1040
Preface
Copyright © 2021 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsi-
bility to global environmental preservation
through compliance with the European Union's
Restriction of Hazardous Substances (RoHS)
directive and Waste Electrical and Electronic
Equipment (WEEE) directive. Environmental
protection is a top priority for ADLINK. We have
enforced measures to ensure that our products,
manufacturing processes, components, and raw
materials have as little impact on the environment as possible.
When products are at their end of life, our customers are encour-
aged to dispose of them in accordance with the product disposal
and/or recovery programs prescribed by their nation or company.
Battery Labels
ᑜ㔚ᳰ⺧࿁ᡴ

iv Preface
California Proposition 65 Warning
WARNING: This product can expose you to chemicals
including acrylamide, arsenic, benzene, cadmium,
Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Diox-
ane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and
vinyl materials, which are known to the State of California to cause
cancer, and acrylamide, benzene, cadmium, lead, mercury,
phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and
vinyl materials, which are known to the State of California to cause
birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
TrademarksProduct names mentioned herein are used for identi-
fication purposes only and may be trademarks and/or registered
trademarks of their respective companies.
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.

Table of Contents v
DMI-1040
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Figures........................................................................ ix
List of Tables.......................................................................... xi
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 1
1.3 Package Contents ............................................................... 2
2 System Description............................................................ 3
2.1 DMI-1040 Specifications...................................................... 3
2.2 Block Diagram ..................................................................... 5
2.3 Mechanical Layout............................................................... 6
2.4 Mechanical Dimensions....................................................... 8
2.5 Power Specifications ........................................................... 9
2.5.1 Power Consumption.......................................................9
2.5.2 System Power Features...............................................10
3 Getting Started ................................................................. 11
3.1 Removing the Rear Cover................................................. 11
3.2 Installing a Mini PCIe MVB Module (optional) ................... 16
3.3 Installing other Mini PCIe Modules (optional) .................... 20
3.4 CFast Card Installation ...................................................... 21
3.5 Mounting............................................................................ 22
3.6 Connections....................................................................... 25
3.7 Starting Up the System...................................................... 27
4 Driver Installation............................................................. 29

vi Table of Contents
4.1 Windows ............................................................................ 29
4.2 Linux Drivers...................................................................... 39
4.2.1 GPS..............................................................................39
4.2.2 Cold & Warm Boot Test ...............................................40
4.2.3 CAN Bus ......................................................................40
4.2.4 Multifunction Vehicle Bus (MVB ).................................41
4.2.5 Touch Panel.................................................................50
4.2.6 Ambient Light Sensor...................................................50
4.2.7 Wi-Fi and Bluetooth......................................................52
4.2.8 USB Wakeup Function (optional).................................53
5 Display Utilities................................................................. 55
5.1 Calibrating the Touch Panel - Ubuntu................................ 55
5.2 Reading the Ambient Light Sensor.................................... 57
5.3 Display Brightness Control................................................. 58
6 Interfaces........................................................................... 59
6.1 Status LEDs....................................................................... 59
6.2 Pin Definitions.................................................................... 60
7 BIOS................................................................................... 65
7.1 Introduction........................................................................ 65
7.2 Entering BIOS Setup.......................................................... 65
7.3 Main Setup......................................................................... 69
7.3.1 BIOS Information..........................................................69
7.3.2 System Information ......................................................70
7.3.3 System Time/System Date...........................................70
7.3.4 Board Information.........................................................71
7.4 Advanced Menu................................................................. 72
7.4.1 CPU Configuration .......................................................73
7.4.2 Graphic Configuration............................................................ 74
7.4.3 Power Management.....................................................75
7.4.4 Power Consumption.....................................................76
7.4.5 System Management ...................................................76

Table of Contents vii
DMI-1040
7.4.6 Thermal Management..................................................78
7.4.7 Watchdog Timer...........................................................79
7.4.8 Super IO Configuration ................................................79
7.4.9 Serial Port x Configuration...........................................80
7.4.10 Serial Console Redirection................................................... 80
7.4.11 Network Stack Configuration........................................83
7.4.12 Trusted Computing.......................................................83
7.4.13 USB Configuration .......................................................83
7.4.14 Intel I210 Gigabit Network Connection.............................. 84
7.5 Chipset Menu..................................................................... 85
7.5.1 North Bridge.................................................................85
7.5.2 South Bridge ................................................................85
7.5.3 Uncore Configuration...................................................86
7.5.4 South Cluster Configuration.........................................87
7.5.5 HD-Audio Configuration...............................................87
7.6 Security Menu.................................................................... 94
7.6.1 Secure Boot .................................................................96
7.7 Boot Menu ......................................................................... 97
7.8 Save & Exit Menu.............................................................. 98
Important Safety Instructions.............................................. 99
Getting Service.................................................................... 101

viii Table of Contents
This page intentionally left blank.

List of Figures ix
DMI-1040
List of Figures
Figure 2-1: DMI-1040 Block Diagram.................................................5
Figure 2-2: DMI-1040 Front Layout....................................................6
Figure 2-3: DMI-1040 Rear, Side and Bottom I/O Layout..................7
Figure 2-4: DMI-1040 Dimensions.....................................................8
Figure 3-1: DMI-1040 Mounting Hole Locations ..............................23
Figure 3-2: Mounting the DMI-1040.................................................24

xListofFigures
This page intentionally left blank.

List of Tables xi
DMI-1040
List of Tables
Table 2-1: DMI-1040 Specifications..................................................3
Table 6-1: Status LED Definitions...................................................59
Table 6-2: COM RS-232 DB9 Pinout (male)...................................60
Table 6-3: COM RS-422 DB9 Pinout (female)................................61
Table 6-4: USB 2.0 M8 Connector Pinout.......................................61
Table 6-5: GbE1/GbE2/GbE3 M12 Connector Pinout ....................62
Table 6-6: DC Power Input Pinout..................................................62
Table 6-7: USB2 (USB 3.0) Pinout .................................................63
Table 6-8: CFast Socket Pin Definition...........................................64

xii List of Tables
This page intentionally left blank.

Introduction 1
DMI-1040
1 Introduction
1.1 Overview
The DMI-1040 is a 10.4" Driver Machine Interface panel PC
designed specifically for the railway industry, equipped with Intel
Atom® x5-E3930 processor (formerly Apollo Lake), resistive
touch, and EN50155 compliance power module. It can be applied
as an HMI unit for driver’s desks, control panel for passenger infor-
mation systems, surveillance system control/display unit or in rail-
way diagnostics and communications applications.
1.2 Features
XIntel Atom® x5-E3930 processor, 1.8GHz
X10.4" color display: 4:3, 1024x768 pixels, 1000cd/m2,
X5-wire resistive touch
XSoftware controlled backlight
XOne Mini PCIe card slot for MVB Module or
USB to dual isolated RS-232 module
X+24/+36/+72/+110 VDC nominal power input (EN50155
compliant)
XIP65 front and IP20 rear ingress ratings

2Introduction
1.3 Package Contents
Please check that your package contains the items below. If you
discover damaged or missing items, please contact your vendor.
XDMI-1040 Driver Machine Interface Panel PC
(features dependent on specific model ordered)
XMounting Screw Kit
Optional Accessories
XStarter Cable Kit (P/N: 91-95239-700E)
XMVB Mini PCIe Card Kit (P/N: 91-95239-1000)
XCAN bus PCIe Card Kit (P/N: 91-95239-300E)
XMini PCIe Cellular Kit - TW, China (P/N: 91-95247-400E)
XMini PCIe Cellular Kit - EU (P/N: 91-95247-5000)
XMini PCIe Wi-Fi/Bluetooth Kit (P/N: 91-95227-1000)
WARNING:
DO NOT install or apply power to equipment that is damaged
or if there is missing/incomplete equipment. Retain the ship-
ping carton and packing materials for inspection. Please con-
tact your ADLINK dealer/vendor immediately for assistance.
Obtain authorization from your dealer before returning any
product to ADLINK.

System Description 3
DMI-1040
2 System Description
2.1 DMI-1040 Specifications
Display
Display Size 10.4" color display
Resolution 1024x768 pixels (4:3)
Brightness 1000 cd/m2
Contrast Ratio 1000:1 typical
Touchscreen 5-wire resistive touch
System Components
Processor Intel Atom® x5-E3930 processor, 1.3GHz dual-core supporting
ECC (TDP 6.5W)
Memory DDR3L-1600GHz 2GB by SODIMM (optional 8GB)
Storage 64GB eMMC 5.0 (onboard)
1x CFast slot, externally accessible with cover
Input/Output
Ethernet 3x external GbE ports via M12 connector based on Intel® I210-IT 2kV isolation
Supports WOL and teaming
USB
1x USB 2.0 port, M8 connector, 600Vrms isolation
(supports up to USB 1.1 speeds)
1x USB 3.0 port, Type A connector with dust cover, supports
1600mA
Serial
1x RS-422 serial port, 1KVrms isolation, DB-9 female connector
1x RS-232 serial port, 1KVrms isolation, DB-9 male connector
2x RS-232 serial ports, DB-9 male connectors, 2.5kVDC isolation
(optional)
Internal
Expansion 1x Full-size Mini PCIe slots 2x SIM card slots
Antennas TBD
Light Sensor Sensor on front bezel to detect ambient illuminance
Speakers 2x speakers on rear panel
Status LEDs
Power 1x power status LED
Table 2-1: DMI-1040 Specifications

4SystemDescription
Power
Input 1x 12-pin aviation connector
+24V/+36V/+72V/+110VDC nominal power input
(16.8V to 137.5V, EN50155 compliant)
Power
Consumption TBD
Mechanical
Dimensions 300 x 250 x 80 mm (w/o power connector)
Weight TBD
Ingress Rating IP65 front, IP20 rear
Mounting Panel mount Environmental
Operating
Temperature -25°C to +70°C, EN50155 T3 class
Storage
Temperature -30°C to +85°C
Humidity 10-90% RH operating, non-condensing
5-95% RH storage, EN 60068-2-30, EN 50155
Vibration 5 Grms, 5-500Hz (with SSD), EN61373 Class 1B
Shock EN50155 standard, method EN61373: 2010, Category 1 Class B
Safety EN50153
Fire Protection EN 45545-2, HL3
Altitude 4572 m (15000 ft) at 25°C (MIL-STD-810G Method 500.5,
Procedure II2) Software
BIOS AMI BIOS
Board
Management ADLINK SEMA 3.5 for WDT, hardware monitor, and fail-safe dual BIOS
Operating
System Linux Ubuntu 16.04 LTS, 64-bit Windows 10 64-bit
Table 2-1: DMI-1040 Specifications

System Description 5
DMI-1040
2.2 Block Diagram
Figure 2-1: DMI-1040 Block Diagram
12 Pin
Power Input
24/36/72/110V (+/-40%)
up to 154VDC
Power
Board
Main Board
Intel Atom x5-E3930
Power
Board
SATA
CFast Slot
SODIMM
DDR3L
Socket
Mini PCIe
Conn x1
Power/Customer
LED x1
RS485 DB9x2
(F+Male)
12V
MVB
Module (opt.)
RS232 DB9x2
(Male)
RS-232
Module (opt.)
Touch Panel
I2C
10.4" LCD Module
Light
Sensor
Speaker x2 (L+R)
12V,5V,
3V3 Bus
PCIe x4
USB 2.0 x2
USB 3.0 x2
LPC
AFM
Board
USB 3.0
Type A x1
Ethernet
M12 Port x3
USB 2.0
M8 Port x1
RS232
Port x1
RS422
Port x1
PCBA Optional
Optional
Internal I/O
External I/O
5-wire LVDS &
Back Light

6SystemDescription
2.3 Mechanical Layout
Front View
Figure 2-2: DMI-1040 Front Layout
Ambient Brightness Sensor
LED
Power Status

System Description 7
DMI-1040
Rear, Side and Bottom Views
Figure 2-3: DMI-1040 Rear, Side and Bottom I/O Layout
RS-232
(male)
RS-422
(female)
Ground
Stud
GbE 3
GbE 2
GbE 1
USB 2.0
DC Input 2x Speakers
CFast Slot
USB 3.0
2x RS-232 w/ 2.5kVDC isolation
(optional)

8SystemDescription
2.4 Mechanical Dimensions
Figure 2-4: DMI-1040 Dimensions
300
250 190
288
215.40
161.80
5.50
6
Bezel
58.90
218
59
80
Dimensions in mm