ADTRAN TSU 610 User manual

TSU 610
User Manual
Part Numbers
July 1999
61200610L2-1A
1200610L2
1200610L2#DC 1200615L2 1200615L2#DC

Trademarks:
Windows is a registered trademark of Microsoft Corp.
T-Watch is a trademark of ADTRAN, Inc.
SLC96 is a registered trademark of AT&T
901 Explorer Boulevard
P.O. Box 140000
Huntsville, AL 35814-4000
Phone: [phone]
© 1999 ADTRAN, Inc.
All rights reserved.
Printed in USA.

iii
ADTRAN Year 2000 (Y2K) Readiness Disclosure
ADTRAN has established a Year 2000 program to ensure that our products will
function correctly in the new millennium. ADTRAN warrants that all products
meet Y2K specifications regardless of model or revision.
Information about ADTRAN’s Y2K compliance program is available at the fol-
lowing locations:
ADTRAN Web Site www.adtran.com
Product Matrix www.adtran.com/y2kfax.html
Faxback Document Line [phone]
Y2K plans and product certifications are
listed in the matrix.
Y2K Project Line [phone]
E-mail [e-mail]

iv
FCC Regulations require that the following information be provided to the
customer in this manual:
1. This equipment complies with Part 68 of the FCC rules. The required
label is attached to the bottom of the chassis.
2. An FCC compliant telephone cord with modular plug is provided with
this equipment. This equipment is designed to be connected to the tele-
phone network or premises wiring using a compatible modular jack
which is Part 68 compliant. See installation instructions for details.
3. If your product causes harm to the telephone network, the Telephone
Company may discontinue your service temporarily. If possible, they
will notify you in advance. If advance notice is not practical, you will
be notified as soon as possible. You will be advised of your right to file
a complaint with the FCC.
4. Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper operation of your
equipment. If they do, you will be given advance notice so as to give
you an opportunity to maintain uninterrupted service.
5. If you experience trouble with the equipment product, please contact
ADTRAN at [phone] for repair/warranty information. The tele-
phone company may ask you to disconnect this equipment from the
network until the problem has been corrected, or until you are sure the
equipment is not malfunctioning.
6. This unit contains no user serviceable parts.
7. The following information may be required when applying to your
local telephone company for leased line facilities.
Service Type REN/SOC FIC USOC
1.544 Mbps -SF 6.0N 04DU9-BN RJ-48C
1.544 Mbps - SF and B8ZS 6.0N 04DU9-DN RJ-48C
1.544 Mbps - ESF 6.0N 04DU9-1KN RJ-48C
1.544 Mbps - ESF and B8ZS 6.0N 04DU9-1SN RJ-48C

v
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio fre-
quencies. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the inter-
ference at his own expense.
Shielded cables must be used with this unit to ensure compliance with Class A
FCC limits.
Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s author-
ity to operate the equipment.

vi
CANADIAN EMISSIONS REQUIREMENTS
This digital apparatus does not exceed the Class A limits for radio noise emis-
sions from digital apparatus as set out in the interference-causing equipment
standard entitled “Digital Apparatus,” ICES-003 of the Department of Commu-
nications.
Cet appareil nuerique respecte les limites de bruits radioelectriques applicables
aux appareils numeriques de Class A prescrites dans la norme sur le materiel
brouilleur: “Appareils Numeriques,” NMB-003 edictee par le ministre des Com-
munications.

vii
CANADIAN EQUIPMENT LIMITATIONS
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equip-
ment must also be installed using an acceptable method of connection. In some
cases, the company's inside wiring associated with a single line individual ser-
vice may be extended by means of a certified connector assembly (telephone
extension cord). The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equip-
ment.
Users should ensure for their own protection that the electrical ground connec-
tions of the power utility, telephone lines and internal metallic waterpipe sys-
tem, if present, are connected together. This precaution may be particularly
important in rural areas.
The Load Number (LN) assigned to each terminal device denotes the percent-
age of the total load to be connected to a telephone loop which is used by the
device, to prevent overloading. The termination on a loop may consist of any
combination of devices subject only to the equipment that the total of the LNs of
all devices does not exceed 100.
The ringer equivalence number (REN) assigned to each terminal adapter is
used to determine the total number of devices that may be connected to each
circuit. The sum of the RENs from all devices in the circuit should not exceed a
total of 5.0.
The Industry Canada Certification label identifies certified equip-
ment. This certification means that the equipment meets certain
telecommunications network protective, operational, and safety
requirements. TheDepartmentdoesnotguaranteetheequipment
will operate to the user's satisfaction.
Users should not attempt to make such connections themselves,
but should contact the appropriate electric inspection authority,
or an electrician, as appropriate.

viii
AFFIDAVIT REQUIREMENTS FOR CONNECTIONTO DIGITAL SERVICES
• An affidavit is required to be given to the telephone company when-
ever digital terminal equipment without encoded analogcontent and
billing protection is used to transmit digital signals containing encod-
ed analog content which are intended for eventual conversion into
voiceband analog signals and transmitted on the network.
• The affidavit shall affirm that either no encoded analog content or
billing information is being transmitted or that the output of the de-
vice meets Part 68 encoded analog content or billing protection spec-
ifications.
• End user/customer will be responsible to file an affidavit with the lo-
cal exchange carrier when connecting unprotected CPE to a 1.544
Mbps or subrate digital services.
• Untilsuch timeas subratedigital terminalequipment isregistered for
voice applications, the affidavit requirement for subrate services is
waived.

ix
AFFIDAVIT FOR CONNECTION OF CUSTOMER PREMISES
EQUIPMENT TO 1.544 MBPS AND/OR SUBRATE DIGITAL SERVICES
For the work to be performed in the certified territory of
______________________________(telco name)
State of _________________________________
County of ________________________________
I, ___________________________________ (name),
(business address), ______________________ (telephone number) being duly
sworn, state:
I have responsibility for the operation and maintenance of the terminal equip-
ment to be connected to 1.544 Mbps and/or ________ subrate digital services.
The terminal equipment to be connected complies with Part 68 of the FCC rules
except for the encoded analog content and billing protection specifications.
With respect to encoded analog content and billing protection:
( ) I attest that all operations associated with the establishment, maintenance,
and adjustment of the digital CPE with respect to analog content and encoded
billing protection information continuously complies with Part 68 of the FCC
Rules and Regulations.
( ) The digital CPE does not transmit digital signals containing encoded analog
content or billing information which is intended to be decoded within the tele-
communications network.
( ) The encoded analog content and billing protection is factory set and is not
under the control of the customer.
I attest that the operator(s)/maintainer(s) of the digital CPE responsible for the
establishment, maintenance, and adjustment of the encoded analog content and
billing information has (have) been trained to perform these functions by suc-
cessfully having completed one of the following (check appropriate blocks):
( ) A. A training course provided by the manufacturer/grantee of the equip-
ment used to encode analog signals; or

x
( ) B. A training course provided by the customer or authorized representative,
using training materials and instructions provided by the manufacturer/
grantee of the equipment used to encode analog signals; or
( ) C. An independent training course (e.g., trade school or technical institu-
tion) recognized by the manufacturer/grantee of the equipment used to encode
analog signals; or
( ) D. In lieu of the preceding training requirements, the operator(s)/main-
tainer(s) is (are) under the control of a supervisor trained in accordance with
_________ (circle one) above.
I agree to provide _________________ (telco's name) with proper documenta-
tion to demonstrate compliance with the information as provided in the preced-
ing paragraph, if so requested.
_________________________________Signature
_________________________________Title
_________________________________ Date
Transcribed and sworn to before me
This ________ day of ________, 199___
_________________________________
Notary Public
My commission expires:
_________________________________

xi
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, please follow these basic safety precau-
tions to reduce the risk of fire, electrical shock, or personal injury:
SAVE THESE INSTRUCTIONS
1Do not use this product near water, such as near a bath
tub, wash bowl, kitchen sink, laundry tub, in a wet base-
ment, or near a swimming pool.
2Avoid using a telephone (other than a cordless-type) dur-
ing an electrical storm. There is a remote risk of shock
from lightning.
3 Do not use the telephone to report a gas leak in the vicin-
ity of the leak.
4 Use only the power cord, power supply, and/or batteries
indicated in the manual. Do not dispose of batteries in a
fire. They may explode. Check with local codes for spe-
cial disposal instructions.

xii
Warranty and Customer Service
ADTRAN will replace or repair this product within five years from the date of
shipment if the product does not meet its published specifications or if it fails
while in service. For detailed warranty, repair, and return information refer to
the ADTRAN Equipment Warranty and Repair and Return Policy Procedure.
Return Material Authorization (RMA) is required prior to returning equipment
to ADTRAN.
For Service, RMA requests, or more information, contact ADTRAN Customer
Service listed on the inside back cover of this manual.

61200610L2-1 TSU 610 User Manual xiii
Table of Contents
Table of Contents ...................................................................................................xiii
List of Figures ...........................................................................................................xxi
List of Tables .........................................................................................................xxiii
Chapter 1. Introduction..........................................................................................1-1
TSU 610 Overview ....................................................................................................1-1
Product Description...........................................................................................1-1
Standard Features in the TSU 610....................................................................1-2
TSU Option Modules.........................................................................................1-3
Option Module Architecture............................................................................1-4
TSU 610 Configuration Applications ..............................................................1-5
Router, PBX, Video Conferencing Application .....................................1-5
Drop and Insert, Voice, and Router Application ...................................1-6
Chapter 2. Installation............................................................................................2-1
Unpack, Inspect, Power Up ....................................................................................2-1
Receipt Inspection..............................................................................................2-1
ADTRAN Shipments Include...........................................................................2-1
Customer Provides.............................................................................................2-2
Power Connection..............................................................................................2-2
AC-Powered Unit .......................................................................................2-2
DC-Powered Unit .......................................................................................2-2
Identification of Rear Panel Layouts .....................................................................2-3
TSU 610 Interfaces..............................................................................................2-7
Network Interface ......................................................................................2-7
T1 Network Test Interface ................................................................. 2-7
Control Port Input .............................................................................. 2-8
Chain Port Output .............................................................................. 2-8
Option Slot Arrangement .................................................................. 2-8
Power-up Testing.............................................................................................2-10
Self-Test .....................................................................................................2-10
Board level tests ................................................................................ 2-10
Unit level tests ................................................................................... 2-10

Table of Contents
xiv TSU 610 User Manual 61200610L2-1
Initialization ..............................................................................................2-11
Set User Passcode ..............................................................................2-11
Set Unit Identification ......................................................................2-11
Set Control Port .................................................................................2-11
Chain-In (PC) .....................................................................................2-11
Chain In/Chain Out .........................................................................2-11
Normal Power-Up Procedure.........................................................................2-12
Grounding Instructions .........................................................................................2-13
Chapter 3. Operation...............................................................................................3-1
Front Panel .................................................................................................................3-1
CSU Status LEDs ................................................................................................3-3
General Menu Operation .........................................................................................3-5
Selecting and Activating a Menu Item ....................................................3-6
Editing a Data Field ...................................................................................3-6
Exit Any Menu Field Operation or Display ...........................................3-6
Data Port Identification .....................................................................................3-7
Terminal Mode Connection..............................................................................3-8
Telnet Connection ......................................................................................3-8
Menu Structure...................................................................................................3-9
Menu Options .............................................................................................3-9
Status .....................................................................................................3-9
Config
(Configuration) .........................................................................................................3-9
Util (Utilities) .......................................................................................3-9
Test ........................................................................................................3-9
Alternate Methods of Control.........................................................................3-10
T-Watch Pro (ADTRAN PC Program) ..................................................3-10
T-Watch Pro/LAN Connection ......................................................3-10
T-Watch Pro/EIA-232 Connection .................................................3-11
SNMP .........................................................................................................3-11
Chapter 4. T1 Network Interface ..........................................................................4-1
Main Menu For T1 Network Interface ...................................................................4-1
T1 Status Menu ...................................................................................................4-2
Network (NI) Performance Reports ........................................................4-3
Network (NI) Errors ..................................................................................4-3
Active Alarms .............................................................................................4-4
View History ...............................................................................................4-4
Port Status ...................................................................................................4-5
Remote Port .................................................................................................4-5
Clear Port Alarm ........................................................................................4-5

Table of Contents
61200610L2-1 TSU 610 User Manual xv
T1 Configuration Menu.....................................................................................4-6
Network (NI) ..............................................................................................4-9
Format .................................................................................................. 4-9
Code ...................................................................................................... 4-9
YEL Alarm ........................................................................................... 4-9
XMIT PRM ........................................................................................... 4-9
Timing Mode ....................................................................................... 4-9
SET LBO ............................................................................................. 4-10
INBAND LPBCK ..............................................................................4-10
BIT STUFFING .................................................................................. 4-10
TR-08 ................................................................................................... 4-10
TSU 610 Clock Sources ............................................................................4-11
Network Timing ................................................................................ 4-11
DTE Timing ....................................................................................... 4-12
U-BR1TE (Slot 1) ...............................................................................4-12
Internal Timing ................................................................................. 4-13
Secondary Timing .............................................................................4-13
Unit Menu .................................................................................................4-14
Ctl Port Rate .......................................................................................4-14
Traps ................................................................................................... 4-14
Access ................................................................................................. 4-14
Init Modem ........................................................................................ 4-14
Control Port ....................................................................................... 4-14
IP Address ..........................................................................................4-14
Subnet Mask ...................................................................................... 4-14
Default Router ................................................................................... 4-14
SLIP Rate ............................................................................................ 4-15
SLIP Flow CTL .................................................................................. 4-15
Proxy Traps ........................................................................................ 4-15
External Alarms. ...............................................................................4-15
Map Exchange (Map Xchng) Menu ......................................................4-15
OFF ...................................................................................................... 4-15
AUTO ................................................................................................. 4-16
MAP In Use: A(B) Menu ........................................................................4-16
DS0 Maps Configuration Menu .............................................................4-17
Initializing the Temp Map ...............................................................4-18
Editing the Temp Map .....................................................................4-19
Applying the Temp Map .................................................................4-19
Reviewing Maps ...............................................................................4-19
Port Configuration (Port Config) ...........................................................4-20
Remote Menu Access .......................................................................4-20
Utility Menu......................................................................................................4-21

Table of Contents
xvi TSU 610 User Manual 61200610L2-1
Time/Date .................................................................................................4-22
Factory Restore .........................................................................................4-22
Set Passcode ..............................................................................................4-22
Enter Passcode from Other Menus .................................................4-22
Change/Set a Passcode ....................................................................4-23
Automatic Time-out Feature ...........................................................4-23
No Passcode Desired ........................................................................4-23
Unit ID .......................................................................................................4-23
Setting the Unit Identification .........................................................4-24
No Unit ID Desired ...........................................................................4-24
Software Revision (Software Rev) .........................................................4-24
Port Utility .................................................................................................4-24
Test Menu..........................................................................................................4-25
Network Tests ...........................................................................................4-26
Loopback Tests ..................................................................................4-26
Network Interface Loopbacks .........................................................4-26
Local Loopback .................................................................................4-27
Remote Loopback ..............................................................................4-27
Test Patterns .......................................................................................4-28
Pattern Result ....................................................................................4-29
Run Self-Test .............................................................................................4-30
Board level tests ................................................................................4-31
Unit level tests ...................................................................................4-31
Port Tests ...................................................................................................4-31
Cancel Tests ...............................................................................................4-31
Remote Menu Access.......................................................................................4-32
Management Configuration............................................................................4-32
Unit Access Table .....................................................................................4-32
Add New Unit ...................................................................................4-34
Modify Unit .......................................................................................4-34
Delete Unit .........................................................................................4-35
Default Unit Passcode ......................................................................4-35
OK .......................................................................................................4-35
SNMP Read Community .........................................................................4-35
SNMP Read/Write Community ............................................................4-35
SNMP Trap Community .........................................................................4-36
SNMP Trap Destination Address ...................................................4-36
System Name .....................................................................................4-36
System Contact ..................................................................................4-36
System Location ................................................................................4-36
Auto. Fail Traps Sent ........................................................................4-37
Poll Link Status Traps Sent ..............................................................4-37

Table of Contents
61200610L2-1 TSU 610 User Manual xvii
Ping IP Host .......................................................................................4-37
Telnet/Terminal Time-out ..............................................................4-37
Telnet/Terminal Password .............................................................4-37
Flash Download................................................................................................4-37
Quit Session.......................................................................................................4-37
Chapter 5. HDSL Network Interface...................................................................5-1
Main Menu For HDSL Network Interface ............................................................5-1
HDSL Status Menu ............................................................................................5-2
HDSL Performance Reports .....................................................................5-3
HDSL Loop Status .....................................................................................5-4
Loop Quality ........................................................................................ 5-4
Loop Loss ............................................................................................. 5-4
Local Loop Sync .................................................................................. 5-4
Active Alarms .............................................................................................5-4
View History ...............................................................................................5-4
Port Status ...................................................................................................5-5
Remote Port ................................................................................................5-5
Clear Port Alarm ........................................................................................5-5
HDSL Configuration Menu ..............................................................................5-6
Network (NI) ..............................................................................................5-9
Format .................................................................................................. 5-9
Training Mode ..................................................................................... 5-9
Timing Mode ....................................................................................... 5-9
Loopback Timeout .............................................................................. 5-9
NIU Loopback ..................................................................................... 5-9
Exit ........................................................................................................ 5-9
TSU 610 Clock Sources ............................................................................5-10
Network Timing ................................................................................ 5-10
DTE Timing ....................................................................................... 5-11
U-BR1TE (Slot 1) ...............................................................................5-11
Internal Timing ................................................................................. 5-12
Secondary Timing .............................................................................5-12
Unit Menu .................................................................................................5-13
Ctl Port Rate .......................................................................................5-13
Traps ................................................................................................... 5-13
Access ................................................................................................. 5-13
Init Modem ........................................................................................ 5-13
Control Port ....................................................................................... 5-13
IP Address ..........................................................................................5-13
Subnet Mask ...................................................................................... 5-13
Default Router ................................................................................... 5-13

Table of Contents
xviii TSU 610 User Manual 61200610L2-1
SLIP Rate ............................................................................................5-14
SLIP Flow CTL ...................................................................................5-14
Proxy Traps ........................................................................................5-14
External Alarms .................................................................................5-14
Map Exchange (Map Xchng) Menu ......................................................5-14
OFF ......................................................................................................5-14
AUTO ..................................................................................................5-15
MAP In Use: A(B) Menu ........................................................................5-15
DS0 Maps Configuration Menu .............................................................5-16
Initializing the Temp Map ...............................................................5-17
Editing the Temp Map .....................................................................5-18
Applying the Temp Map .................................................................5-18
Reviewing Maps ................................................................................5-18
Port Configuration (Port Config) ...........................................................5-19
Remote Menu Access ........................................................................5-19
Utility Menu......................................................................................................5-20
Time/Date .................................................................................................5-21
Factory Restore .........................................................................................5-21
Set Passcode ..............................................................................................5-21
Enter Passcode from Other Menus .................................................5-21
Change/Set a Passcode ....................................................................5-22
Automatic Time-out Feature ...........................................................5-22
No Passcode Desired ........................................................................5-22
Unit ID .......................................................................................................5-22
Setting the Unit Identification .........................................................5-23
No Unit ID Desired ...........................................................................5-23
Software Revision (Software Rev) .........................................................5-23
Port Utility .................................................................................................5-23
Test Menu..........................................................................................................5-24
Network Tests ...........................................................................................5-25
Loopback Tests ..................................................................................5-25
Network Interface Loopbacks .........................................................5-25
Local Loopback .................................................................................5-26
Remote Loopback ..............................................................................5-26
HDSL Loopback ................................................................................5-27
Test Pattern ........................................................................................5-27
Pattern Result ....................................................................................5-28
Run Self-Test .............................................................................................5-29
Board level tests ................................................................................5-30
Unit level tests ...................................................................................5-30
Port Tests ...................................................................................................5-31
Cancel Tests ...............................................................................................5-31

Table of Contents
61200610L2-1 TSU 610 User Manual xix
Remote Menu Access.......................................................................................5-31
Management Configuration ...........................................................................5-32
Unit Access Table .....................................................................................5-32
Add New Unit ................................................................................... 5-34
Modify Unit ....................................................................................... 5-34
Delete Unit ......................................................................................... 5-35
Default Unit Passcode ......................................................................5-35
OK ....................................................................................................... 5-35
SNMP Read Community ........................................................................5-35
SNMP Read/Write Community ............................................................5-35
SNMP Trap Community .........................................................................5-35
SNMP Trap Destination Address ...................................................5-35
System Name ..................................................................................... 5-36
System Contact .................................................................................. 5-36
System Location ................................................................................ 5-36
Auto. Fail Traps Sent ........................................................................5-36
Poll Link Status Traps Sent ..............................................................5-37
Ping IP Host .......................................................................................5-37
Telnet/Terminal Time-out ..............................................................5-37
Telnet/Terminal Password .............................................................5-37
Flash Download................................................................................................5-38
Quit Session.......................................................................................................5-38
Appendix A. Understanding SNMP.................................................................. A-1
Appendix B. Understanding TR-08..................................................................... B-1
Appendix C. Network Pinouts............................................................................ C-1
Appendix D. System Messages .......................................................................... D-1
Appendix E. Specifications .................................................................................. E-1
Appendix F. HDSL Deployment Guidelines.................................................... F-1
Index .................................................................................................................Index-1

Table of Contents
xx TSU 610 User Manual 61200610L2-1