Advantech IDK-1110R-series User manual

User Manual
IDK-1110R-series
TFT-LCD 10.4” SVGA (LED
Backlight)

IDK-1110R User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2008
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
AMI is a trademark of American Megatrends Inc.
IBM and PC are trademarks of International Business Machines Corporation.
Intel® Core 2 Quad, Pentium Dual Core and Celeron are trademarks of Intel Corpo-
ration.
WinBond is a trademark of Winbond Corporation.
All other product names or trademarks are properties of their respective owners.
Part No. 2006111000 Edition 1
Printed in China Jun 2012

iii IDK-1110R User Manual
A Message to the Customer
Advantech Customer Services
Each and every Advantech product is built to the most exacting specifications to
ensure reliable performance in the harsh and demanding conditions typical of indus-
trial environments. Whether your new Advantech equipment is destined for the labo-
ratory or the factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has come to be
known.
Your satisfaction is our primary concern. Here is a guide to Advantech’s customer
services. To ensure you get the full benefit of our services, please follow the instruc-
tions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions,
you can easily find answers in your product documentation. These answers are nor-
mally a lot more detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer, gather all the
information or questions that apply to your problem, and with the product close at
hand, call your dealer. Our dealers are well trained and ready to give you the support
you need to get the most from your Advantech products. In fact, most problems
reported are minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech engineers every busi-
ness day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.

IDK-1110R User Manual iv
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.

v IDK-1110R User Manual
Contents
Chapter 1 Overview...............................................1
1.1 General Description ..................................................................................2
1.2 Display Characteristics..............................................................................2
1.3 Mechanical Specification...........................................................................2
1.4 Mechanical Dimension..............................................................................3
1.4.1 Front (For IDK-1110R-40SVA1E).................................................3
1.4.2 Rear (For IDK-1110R-40SVA1E)..................................................4
1.4.3 Front (For IDK-1110R-23SVA1E).................................................5
1.4.4 Rear (For IDK-1110R-23SVA1E)..................................................6
1.5 Absolute Maximum Ratings ......................................................................7
1.5.1 Absolute Ratings of TFT LCD Module..........................................7
1.5.2 Absolute Ratings of Environment..................................................7
1.6 Block Diagram...........................................................................................7
Figure 1.1 TFT LCD module........................................................7
Chapter 2 Electrical Characteristics...................9
2.1 TFT LCD Module.....................................................................................10
2.1.1 Power specification (For IDK-1110R-40SVA1E).........................10
2.1.2 Power specification (For IDK-1110R-23SVA1E).........................10
2.1.3 Signal Electrical Characteristics..................................................11
2.2 Backlight Unit ..........................................................................................12
2.2.1 Parameter guideline for LED backlight (For IDK-1110R-40SVA1E)
....................................................................................................12
2.2.2 Parameter guideline for LED backlight (For IDK-1110R-23SVA1E)
....................................................................................................12
Chapter 3 Signal Characteristics.......................15
3.1 Pixel Format Image.................................................................................16
3.2 Pin Description........................................................................................16
Table 3.1: Pin Description .........................................................16
3.3 The Input Data Format............................................................................17
3.3.1 SEL68.........................................................................................17
3.4 Interface Timing ......................................................................................18
3.4.1 Timing Characteristics ................................................................18
Table 3.2: Timing Characteristics(For IDK-1110R-40SVA1E)...18
Table 3.3: Timing Characteristics(For IDK-1110R-23SVA1E)...18
3.4.2 Input Timing Diagram..................................................................19
3.5 Power ON/OFF Sequence......................................................................19
Chapter 4 Display Connector Definition ...........21
4.1 TFT LCD Signal(CN1): LVDS Connector................................................22
Table 4.1: Connector.................................................................22
Table 4.2: Pin Assignment.........................................................22
4.2 LED Backlight Unit (CN2): LED Driver Connector ..................................22
4.3 LED Light Bar Input Connector (CN3).....................................................22
4.3.1 Connector specification (For IDK-1110R-40SVA1E) ..................22
4.3.2 Connector Specification((For IDK-1110R-23SVA1E) .................23
Figure 4.1 Dimension.................................................................23

IDK-1110R User Manual vi
Chapter 5 Touch Screen....................................25
5.1 Touch Characteristics............................................................................. 26
5.2 Optical Characteristics............................................................................ 26
5.3 Environment Characteristics................................................................... 26
5.4 Mechanical Characteristics..................................................................... 26
5.5 Electronic Characteristics ....................................................................... 26
Chapter 6 Touch Controller...............................27
6.1 Touch Controller Characteristics............................................................. 28
6.2 Specifications.......................................................................................... 28
6.3 Environmental Feature............................................................................ 28
6.4 Pin Assignment and Description............................................................. 29
6.4.1 Connector and LED Location...................................................... 29
6.4.2 Combo Interface Connector, JP1, Pins and Signal Descriptions 29
Figure 6.1 Board mounted header............................................. 30
6.4.3 Touch Screen Connector, JP2, Pins and Signal Descriptions.... 30
Appendix A Optical Characteristics..................... 31
A.1 Optical Characteristics (for IDK-1110R-40SVA1E)................................. 32
A.2 Optical Characteristics (for IDK-1110R-23SVA1E)................................. 32
Appendix B Handling Precautions.......................35
B.1 Handling Precautions.............................................................................. 36

Chapter 1
1Overview

IDK-1110R User Manual 2
1.1 General Description
This specification applies to the 10.4 inch color TFT LCD module IDK-1110R-series.
IDK-1110R-series designed with wide viewing angle; wide operating temperature and
long life LEDs backlight is well suited to be the display units for Industrial Applica-
tions.
LED driving board for backlight unit is included in this panel and the structure of the
LED units is replaceable.
Also, IDK-1110R-series has LVDS interface and 4 wire resistive touch solution.
The screen format is intended to support the SVGA (800(H) x 600(V)) screen and
16.2M (RGB8-bits) or 262k colors (RGB 6-bits). IDK-1110R-series is a RoSH prod-
uct.
1.2 Display Characteristics
The following items are characteristics summary on the table under 25°C condition.
1.3 Mechanical Specification
For IDK-1110R-40SVA1E:
For IDK-1110R-23SVA1E:
Items Specifications Unit
Screen Diagonal 10.4 inch
Active Area 211.2(H) x 158.4(V) mm
Pixels H x V 800x3(RGB) x 600 -
Pixel Pitch 0.264x 0.264 mm
Pixel Arrangement R.G.B. Vertical Stripe -
Display Mode TN, Normally White -
Nominal Input Voltage VDD 3.3 (typ) Volt
Typical Power Consumption 4.8W (typ) (for IDK-1110R-40SVA1E)
3.5W (typ) (for IDK-1110R-23SVA1E) Watt
Item Min. Typ. Max. Unit Note
Module Size Horizontal(H) - 243 - mm
Vertical(V) - 184 - mm
Depth(D) - 10.6 - mm
Weight - 530 - g -
Item Min. Typ. Max. Unit Note
Module Size Horizontal(H) - 236 - mm
Vertical(V) - 176.9 - mm
Depth(D) - 8.3 - mm
Weight - 470 - g -

3 IDK-1110R User Manual
Chapter 1 Overview
1.4 Mechanical Dimension
1.4.1 Front (For IDK-1110R-40SVA1E)

IDK-1110R User Manual 4
1.4.2 Rear (For IDK-1110R-40SVA1E)

5 IDK-1110R User Manual
Chapter 1 Overview
1.4.3 Front (For IDK-1110R-23SVA1E)

IDK-1110R User Manual 6
1.4.4 Rear (For IDK-1110R-23SVA1E)

7 IDK-1110R User Manual
Chapter 1 Overview
1.5 Absolute Maximum Ratings
1.5.1 Absolute Ratings of TFT LCD Module
1.5.2 Absolute Ratings of Environment
Note: Maximum Wet-Bulb should be 39°C and no condensation.
1.6 Block Diagram
Figure 1.1 TFT LCD module
Item Symbol Value Unit Conditions
Min. Max.
Logic/LCD Drive
Voltage VDD -0.3 +4.0 [Volt] For IDK-1110R-40SVA1E
Item Symbol Value Unit Conditions
Min. Max.
Logic/LCD Drive
Voltage VDD -0.3 +3.6 [Volt] For IDK-1110R-23SVA1E
Item Symbol Value Unit Conditions
Min. Max.
Operating Temperature TOP -10 +60 °C For IDK-1110R-40SVA1E
Operation Humidity HOP 20 90 [%RH]
Storage Temperature TST -30 +70 °C For IDK-1110R-40SVA1E
Storage Temperature TST -20 +70 °C For IDK-1110R-23SVA1E
Storage Humidity HST 10 90 [%RH]

IDK-1110R User Manual 8

Chapter 2
2Electrical
Characteristics

IDK-1110R User Manual 10
2.1 TFT LCD Module
2.1.1 Power specification (For IDK-1110R-40SVA1E)
2.1.2 Power specification (For IDK-1110R-23SVA1E)
Note Measurement condition:
Parameter Symbol Value Unit Remark
Min. Typ. Max.
Logic/LCD Drive VDD 3.0 3.3 3.6 [Volt] -
VDD Current IDD - 280 - [mA] All Black Pattern
(VDD=3.3V, at 60Hz)
LCD Inrush Current Irush - - 1.5 [A] Note 1, Black Pattern,
Rising time=470us
VDD Power PDD - 0.924 - [Watt] All Black Pattern
(VDD=3.3V, at 60Hz)
Allowable Logic/LCD
Drive Ripple Voltage VDDrp - - 100 [mV] All Black Pattern (VDD=3.3V, at 60Hz)
Parameter Symbol Value Unit Remark
Min. Typ. Max.
Logic/LCD Drive VDD 3.0 3.3 3.6 [Volt] -
VDD Current IDD - 320 - [mA] All Black Pattern
(VDD=3.3V, at 60Hz)
LCD Inrush Current Irush - - 1.5 [A] Note 1
VDD Power PDD - 1.06 - [Watt] All Black Pattern
(VDD=3.3V, at 60Hz)
Allowable Logic/LCD
Drive Ripple Voltage VDDrp - - 100 [mV] All Black Pattern (VDD=3.3V, at 60Hz)

11 IDK-1110R User Manual
Chapter 2 Electrical Characteristics
2.1.3 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Note LVDS Signal Waveform.
Parameter Symbol Value Unit Remark
Min. Typ. Max.
Differential Input
High Threshold VTH - - 100 [mV] VICM=1.2V
Differential Input
Low Threshold VTL 100 - - [mV] VICM=1.2V
Input Differential
Voltage VID 100 400 600 [mV]
Differential Input
Common Mode
Voltage
VICM 1.1 - 1.45 [V] VTH/VTL=±100mV
(For IDK-1110R-40SVA1E)
Differential Input
Common Mode
Voltage
VICM 1.125 1.125 1.375 [V] VTH/VTL=±100mV
(For IDK-1110R-23SVA1E)

IDK-1110R User Manual 12
2.2 Backlight Unit
2.2.1 Parameter guideline for LED backlight (For IDK-1110R-
40SVA1E)
Following characteristics are measured under a stable condition using an inverter at
25°C (Room Temperature):
2.2.2 Parameter guideline for LED backlight (For IDK-1110R-
23SVA1E)
Following characteristics are measured under a stable condition using an inverter at
25°C (Room Temperature):
Parameter Symbol Value Unit Remark
Min. Typ. Max.
Input Voltage VCC 10.8 12 12.6 [Volt]
Input Current IVCC - 0.32 - [A] 100% PWM Duty
Power Consumption PVCC - 3.8 - [Watt] 100% PWM Duty
Dimming Frequency FPWM 200 - 20K [Hz]
Swing Voltage 3 3.3 5.5 [Volt]
Dimming Duty Cycle 5 - 100 %
Operation Lifetime 50,000 - - Hrs IF = 80mA, Ta = 25°C
Parameter Symbol Value Unit Remark
Min. Typ. Max.
Input Voltage VCC 10.8 12 12.6 [Volt]
Input Current IVCC - 0.12 - [A] 100% PWM Duty
Power Consumption PVCC - 1.44 - [Watt] 100% PWM Duty
Dimming Frequency FPWM 200 - 10K [Hz]
Swing Voltage 3 3.3 5.5 [Volt]
Dimming Duty Cycle 5 - 100 %
Dimming Voltage 0.6 - 3 [Volt]
5- 100%
LED Forward Current IF-25- mATa=25°C

13 IDK-1110R User Manual
Chapter 2 Electrical Characteristics
Note1 Ta means ambient temperature of TFT-LCD module.
Note2 VCC, Ivcc, PVCC, are defined for LED B/L.(100% duty of PWM dimming)
Note3 IF, VF are defined for each channel of LED Light Bar. There are two LED
channels (AN1-CA1-CA2) in backlight unit.
Note4 If IDK-1110R-seires module is driven by high current or at high ambient tem-
perature & humidity condition. The operating life will be reduced.
Note5 Operating life means brightness goes down to 50% initial brightness. Mini-
mum operating life time is estimated data.
LED Forward Voltage VF- 26 29.2 [Volt] IF= 25mA,
Ta = 25°C -30°C
LED Power Con-
sumption PLED - 1.92 - [Watt] IF= 25mA,
Ta = 25°C (total power)
Operation Lifetime 25,00
030,00 0- Hrs Ta= 60 C RH<60% IF=25mA Tj <70°C

IDK-1110R User Manual 14