Advantech KT-D213U8B User manual

User Manual
KT-D213U8B
Medical LCD Monitor

KT-D213U8B User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2018
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Trademarks
All trademarks and registered trademarks are property of their respective owners.
Disclaimer Notice
Although every attempt has been made to achieve technical accuracy in this docu-
ment, we assume no responsibility for errors that may be found. Our goal is to pro-
vide you with the most accurate and usable documentation possible: If you discover
errors, please let us know.
Important
Please read this User’s Manual carefully to familiarize yourself with safe and effective
usage procedures. Please retain this manual for future reference.
Importante
Lea detenidamente este manual del usuario para familiarizarse con los procedimien-
tos de uso eficaces y seguros. Conserve este manual para futuras consultas.
重要
ご使用前には必ず取扱説明書をよくお読みになり、正しくお使いください。 この取
扱説明書は大切に保管してください。
Part No.2008D21330 Edition 1
Printed in China Nov 2018

iii KT-D213U8B User Manual
Symbols
FCC Compliance Information
Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at their own expense.
Modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment under FCC rules.
Symbol Title
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The lighting flash with arrowhead symbol in an equilateral triangle, is
intended to alert the user to the presence of un-insulated “Dangerous
Voltage” within the product’s enclosure that of many sufficient magnitude
to constitute a risk of electric shock to persons.
Follow operating instructions.
Direct Current.
This symbol denotes the manufacturer.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

KT-D213U8B User Manual iv
CE (Conformity European)
UL (Underwriters Laboratories)
VCCI (Voluntary Control Council for Interference)
KC (Korea Communication Commision)
CE mark notice
Declaration of conformity in accordance with Article 10(1) of the CE
directive.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
LCD MONITOR E328413
4LN3
MEDICAL EQUIPMENT WITH RESPECT TO ELECTRIC SHOCK, FIRE
AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH UL60601-1
AND CAN/CSA C22.2 NO. 601.1
この装置は、情報処理装置等電波障害自主規制協議会 (VCCI）の基準に基づ
くクラス A 情報技術装置です。この装置を家庭環境で使用すると電波妨害
を引き起こすことがあります。この場合には使用者が適切な対策を講ずるよ
う要求されることがあります。
A 급 기기 ( 업무용 방송통신기자재 )
이 기기는 업무용 (A 급 ) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며 ,
가정외의 지역에서 사용하는 것을 목적으로 합니다 .

v KT-D213U8B User Manual
Disposal of Waste
Safety Precautions and Maintenance
Safety precautions
Do not place any heavy objects on the power cord. Damage to the cord may
cause shock or fire.
When operating the LCD monitor with its AC/DC power supply, use a power
supply cord you use must have been approved by and comply with the interna-
tional safety standards.
Do not bend the power cord.
DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and
opening or removing covers may expose you to dangerous shock hazards or
other risks. Refer all servicing to qualified service personnel.
Do not place this product on a sloping or unstable cart, stand or table, as the
Monitor may fall, causing serious breakdown.
Do not spill any liquids into the cabinet or never use your monitor near water.
Do not insert any kinds of objects into the cabinet slots, as they may touch dan-
gerous voltage points, which can be harmful or fatal or may cause electric
shock, fire or equipment failure.
Do not cover vents on the Monitor.
Do not place any objects onto the Monitor and do not use the Monitor outdoors.
The inside of the fluorescent tube located in the LCD monitor contains Mercury.
Please follow the bylaws or rules of your municipality to dispose of the tube
properly.
Do not use a monitor in very hot, humid, dusty or oily areas.
If a monitor or glass is broken, handle with care. Do not come in contact with the
liquid crystal.
Only use 120 Volt in North America area with UL Listed detachable power cord
with NEMA configuration 5-15P type (parallel blades) plug cap.
This marking shown on the product or its literature, indicates that it
should not be disposed with other household waste at the end of its
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for
details of where and how they can take this item for environmen-
tally safe recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product should not
be mixed with other commercial waste for disposal.
Caution! FOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING
WHEN SETTING UP AND USING
THE LCD MONITOR.

KT-D213U8B User Manual vi
When the power supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into the Monitor.
If the Monitor has been exposed to rain or water.
If the Monitor has been dropped or the cabinet damaged
If the Monitor does not operate normally by following operating instructions.
Allow adequate ventilation around the Monitor so that heat can properly dissi-
pate. Do not block ventilated openings or place the Monitor near a radiator or
other heat sources. Do not put anything on top of the Monitor.
The power cable connector is the primary means of detaching the system from
the power supply. The Monitor should be installed close to a power outlet which
is easily accessible.
Handle with care when transporting. Save packing for transporting.
Safety
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to other devices in the vicinity. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to other devices, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
1. Reorient or relocate the receiving device.
2. Increase the separation between the equipment.
3. Connect the equipment into an outlet on a circuit different from that to which the
other device(s) are connected.
4. Consult the manufacturer or field service technician for help.
Keep away from a window
Do not place your LCD Monitor near a window to protect the Monitor from being
exposed to rain, water, moisture or sunlight that can severely damage it.
Caution! IMMEDIATELY UNPLUG THE MONITOR FROM THE WALL OUTLET
AND REFER SERVICING TO QUALIFIED SERVICE POWER PER-
SONNEL UNDER THE FOLLOWING CONDITIONS:
Warning! High Voltage
The AC/DC inverter where high voltage current flows has the following
'CAUTION mark against high voltage' and you should never open the
monitor to access the inverter. Please refer to a technician for the ser-
vice, if it is necessary.

vii KT-D213U8B User Manual
Safe storage
Safe storage of the LCD Monitor is in a range of minus 20 to plus 60 Celsius
(68°F - 149°F). Storing the LCD Monitor out of this range could result in perma-
nent damage.
Image Persistence
Image persistence is what a residual or ghost image of a previous image
remains visible on the screen. Unlike CRT monitors, LCD monitors' image per-
sistence is not permanent, but constant images being displayed for a long
period of time should be avoided.
To alleviate image persistence, turn off the Monitor for as long as the previous
image was displayed. For example, if an image was on the Monitor for one hour
and a residual image remains, the Monitor should be turned off for one hour to
erase the image.
Placement and Adjustment of the Monitor
For optimum performance of the system, one hour warm-up is recommended.
Adjust the Monitor height so that the top of the screen is at or slightly below eye
level. Your eyes should look slightly downward when viewing the middle of the
screen.
Rest your eyes periodically by focusing on an object farther away and blinking
often.
Position the Monitor at a 90 degree angle to windows and other light sources to
minimize glare and reflections. Adjust the Monitor tilt so that ceiling lights do not
reflect on your screen.
You can use an antiglare filter to have a better view out of the reflected light.
Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using
any cleaning solution or glass cleaner.
Adjust the Monitor's brightness and contrast controls to enhance readability.
Avoid displaying fixed patterns on the Monitor for long periods of time to avoid
image persistence (residual image).
Battery Related
When you remove the batteries from the remote control, keep the batteries out
of the reach of children. If a child swallows the battery, consult your doctor
immediately.
When replacing the batteries, insert the batteries with the correct polarities (+, -
). If the batteries are inserted incorrectly, the batteries may implode or the inter-
nal chemicals may leak, which may result in fire, injury or contaminate the envi-
ronment.
Note! As with all personal display devices, Advantech recommends using a
moving screen saver at regular intervals whenever the screen is idle or
turning off the Monitor when not in use.
Note! For optimal view, 508 mm (20 inches) distance from your eyes to the
screen is recommended.

KT-D213U8B User Manual viii
Used batteries including rechargeable batteries must be disposed of separately
and collected for recycling. Used batteries and rechargeable batteries can be
handled by a nearby recycling center or agency that deals in batteries or
rechargeable batteries.
Use only designated standard batteries. Do not use new batteries with old
one(s). The batteries may implode or the internal chemicals may leak, which
may result in fire, injury or contaminate the environment.

ix KT-D213U8B User Manual
Contents
Chapter 1 Introduction..........................................1
1.1 Introduction ............................................................................................... 2
1.2 Features .................................................................................................... 2
1.3 Specifications ............................................................................................ 2
1.3.1 Display .......................................................................................... 2
1.3.2 Environmental Condition............................................................... 3
1.3.3 General ......................................................................................... 3
1.3.4 In / Out Terminals ......................................................................... 3
Chapter 2 Installation............................................5
2.1 Unpacking ................................................................................................. 6
2.2 LCD Monitor View ..................................................................................... 7
2.3 Installation ............................................................................................... 10
2.4 Connecting the Signal Cables................................................................. 11
2.5 Connecting AC/DC Power....................................................................... 11
2.6 Connecting to a PC ................................................................................. 12
2.7 Vesa-Mount Installation........................................................................... 13
2.8 Anti-Theft Kensington Lock ..................................................................... 13
Chapter 3 OSD Menu ..........................................15
3.1 Operating Method ................................................................................... 16
3.1.1 Picture......................................................................................... 17
3.1.2 Image .......................................................................................... 18
3.1.3 Setup........................................................................................... 19
3.1.4 Advance ...................................................................................... 20
3.1.5 Information .................................................................................. 21
3.1.6 OSD Input Source....................................................................... 22
3.1.7 Multi Picture (PIP/PBP) Function Definition ................................ 22
Appendix A Cleaning .............................................23
A.1 Cleaning the LCD panel .......................................................................... 24
A.2 Cleaning the Cabinet............................................................................... 24
A.3 Cleaning Agents Anti-Theft Kensington Lockist ...................................... 24
Appendix B Troubleshooting ................................27
B.1 No Picture ............................................................................................... 28
B.2 Power Button Does Not Respond ........................................................... 28
B.3 Image Persistence .................................................................................. 28
B.4 Unstable, Unfocused or Swimming Image .............................................. 28
B.5 Display Image is Not Properly Sized....................................................... 28
B.6 No Video ................................................................................................. 28

KT-D213U8B User Manual x

Chapter 1
1Introduction

KT-D213U8B User Manual 2
1.1 Introduction
LCD Monitors are intended to be used in various kinds of medical image applications
for which the device complies with the performance specified by the manufacturer of
the system. LCD monitor KT-D213U8B Series consists of a 21.3-inch TFT LCD
monochrome monitor and a color monitor designed for the needs of high-resolution
medical image display.
1.2 Features
High brightness and high contrast ratio
HDMI (High Definition Multimedia Interface) supports up to 1080p, 1600x1200/
60Hz (UXGA)
DVI (Digital Visual Interface) supports up to 1080p, 1600 x 1200 / 60 Hz (UXGA)
Multi-Standard RGB(PC) monitor supports up to 1600 x 1200 / 60 Hz (UXGA)
Multi-standard video system supported : NTSC, PAL, SECAM
Multi-picture display : Normal, PiP, PBP
Variable image size : auto, fill all (16:9), fill aspect, zoom
Gamma and DICOM (color temp) selection
One touch DICOM mode change
Variable picture control : brightness, contrast, sharpness, color, tint
12-BIT LUT processing
Video enhancement features included
De-interlacing features Included
DICOM GSDF (Part 14) compliant
DICOM clear / blue mode support
1.3 Specifications
1.3.1 Display
Item
Specifications
KT-D213U8B
(Mono)
KT-D213U8B
(Color-L)
KT-D213U8B
(Color-H)
Screen Size (Active Area) 21.3” (432.0 (H) x 324.0 (V) [mm])
Aspect ratio 4:3
Number of Pixels 1600 (H) x 1200 (V)
Pixel Pitch 0.270(H) x 0.270(V) [mm]
Displayable Colors 16.7 M (8-bit)
Brightness (Typical) 1900 cd/m2 440 cd/m2 800 cd/m2
Contrast Ratio (Typical) 1400:1 1500:1 1400:1
Response Time (Typical) 40 ms (Tr+Tf) 20 ms (Tr+Tf) 20 ms (Tr+Tf)
Viewing Angle (H/V) 176/176 178/178 178/178

3 KT-D213U8B User Manual
Chapter 1 Introduction
1.3.2 Environmental Condition
1.3.3 General
1.3.4 In / Out Terminals
Item
Specifications
KT-D213U8B
(Mono)
KT-D213U8B
(Color-L)
KT-D213U8B
(Color-H)
Temperature Operational 0 ~ 40 °C
Storage -20 ~ 60 °C
Humidity Operational Ta = 40°C, 90% RH (No condensation)
Storage Ta = 40°C, MAX 70% RH (No condensation)
Item
Specifications
KT-D213U8B
(Mono)
KT-D213U8B
(Color-L)
KT-D213U8B
(Color-H)
Power Supply DC 12 V, 7 A
(MAX)
DC 24 V, 3.75 A
(MAX)
DC 24 V, 6.25 A
(MAX)
Power Consumption
(Typical) 49.5 W 45.4 W 51.5 W
Dimensions (Without Stand)
W x H x D (mm) 367 x 485 x 86.5 [mm]
Weight (Without Stand) 6.5 kg 6.4 kg 5.5 kg
Item
Specifications
KT-D213U8B
(Mono)
KT-D213U8B
(Color-L)
KT-D213U8B
(Color-H)
DC Power Input DC Jack x 1 DC 12 V, 7A
(MAX)
DC 24 V, 3.75 A
(MAX)
DC 24 V, 6.25 A
(MAX)
Service Ear Jack x 1 Service Port
HDMI Input HDMI Jack x 1
(Type A)
Digital RGB : TMDS
MAX : 1080p, 1600 x 1200 / 60 Hz (UXGA)
DVI Input DVI Jack x 1
(Type D)
Digital RGB : TMDS
MAX : 1080p, 1600 x 1200 / 60 Hz (UXGA)
RGB Input
D-Sub Jack x 1
BNC Jack x 1
Analog RGB : 0.7V[p-p](75Ω), H/CS/V : TTL (2.2 kΩ),
SOG : 1V[p-p](75Ω)
MAX : 1600 x 1200 / 60 Hz (UXGA)
S-Video Input
Mini DIN Jack
x 1(4 pin)
Y: 1V[p-p] (75 Ω), C: 0.286V[p-p] (75 Ω) [NTSC]
Y: 1V[p-p] (75 Ω), C: 0.300V[p-p] (75 Ω) [PAL /
SECAM]
Video
Input / Output
BNC Jack x 1 1V[p-p] (75 Ω) [ NTSC / PAL / SECAM]
USB Up USB-B Jack x 1 USB 2.0
USB Down USB-A Jack x 2 USB 2.0

KT-D213U8B User Manual 4
NOTICE :The specifications of Advantech products are subject to change without
notice.
1. Type of protection against electric shock: Class l equipment.
2. Degree of protection against electric shock: Not classified – no applied parts.
3. Classification according to the degree of protection against ingress of water:
ordinary equipment.
4. This equipment is not suitable for use in the presence of flammable anesthetics
or oxygen.
5. Mode of operation: continuous operation.

Chapter 2
2Installation

KT-D213U8B User Manual 6
2.1 Unpacking
Before you unpack the LCD monitor, prepare a suitable workspace, which should be
a stable, flat, dust-free surface, near a wall outlet. Set up the LCD monitor in a loca-
tion where there is sufficient airflow away from direct sunlight.
On unpacking the LCD monitor, make sure the following items are included in the box
and in good condition:
Accessories
Optional accessories
HDMI Cable
DVI Cable
VGA D-SUB Cable
USB A-B Cable
S-VIDEO Cable
Video BNC Cable
If you find any of these items are missing or damaged, contact your dealer or the
seller immediately. Do not throw away the packing material or shipping carton in case
you need to ship or store the LCD monitor in the future.
LCD Monitor Adaptor AC/DC Power,
Power Cord User's Manual

7 KT-D213U8B User Manual
Chapter 2 Installation
2.2 LCD Monitor View
The LCD monitor is designed to provide easy and convenient access to all the control
keys and the peripheral ports. Before you begin with installation, please identify the
controls and ports as shown in the following figures.
Front view
Note! Do not touch auto calibration sensor directly. This may cause a malfunc-
tion by volatility of luminance.
1
2
1Anti-Reflective Glass (Option) 2Auto Calibration Sensor (Option)

KT-D213U8B User Manual 8
Rear / Side view
Note! Do not press any other parts of the front bezel except the control buttons
as it may cause a malfunction or incorrect operation.
11
1UP
2DOWN
3SELECT
4MENU
5POWER INDICATOR
6POWER
UPDOWNMENU
SELECTPOWER
UP DOWN SELECT MENU POWER
654321

9 KT-D213U8B User Manual
Chapter 2 Installation
Note! Do not touch signal input, signal output or other connectors, and
the patient simultaneously.
External equipment intended for connection to signal input, signal
output or other connectors, shall comply with relevant IEC Stan-
dard (e.g., IEC60950 for IT equipment and IEC60601-1 series for
medical electrical equipment). In addition, all such combination
system shall comply with the standard IEC60601-1 and /for
IEC60601-1-1 harmonized standard or the combination.
If in doubt contact qualified technician or your local representative.
1DC POWER input
2USB DOWN
3USB UP
4SVC
5HDMI input
6DVI input
7RGB 1 input
8S-VIDEO input
9VIDEO input
10
VIDEO output
VIDEO
OUT
VIDEO
IN
S-VIDEORGB 1
7 8 9 10
USB
DOWN
USB
UP
HDMISVC
DC
POWER DVI
1 2 3 4 5 6
UPDOWNMENU
SELECTPOWER

KT-D213U8B User Manual 10
2.3 Installation
BEFORE CONNECTING
Adjusting the display position
13
30° 30°
30°
Portrait
Vertical height
Left to right pan
Front to back tilt
90°