Advantech FPM-5151G Series User manual

用户手册
FPM-5151G/5171G/
5191G Series
15" XGA/17" SXGA/19" SXGA
Industrial Monitor with Resistive
Touchscreen, Direct-VGA, DVI
Ports and DC12-30V Inputs

FPM-5151G/5171G/5191G Series User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2012
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
This manual includes the following products:
FPM-5151G Series
FPM-5171G Series
FPM-5191G Series
Part No. 200K51X100 Edition 1
Printed in China December 2012

iii FPM-5151G/5171G/5191G Series User Manual
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.

FPM-5151G/5171G/5191G Series User Manual iv
Declaration of Conformity
This device complies with part 15 of the FCC rules: Operation is subject to the follow-
ing two condition:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages

v FPM-5151G/5171G/5191G Series User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to the
user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

FPM-5151G/5171G/5191G Series User Manual vi

vii FPM-5151G/5171G/5191G Series User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Specifications ............................................................................................ 2
1.2.1 General ......................................................................................... 2
1.2.2 Touchscreen (Optional) ................................................................ 2
1.3 LCD Specification...................................................................................... 3
1.4 Connectors................................................................................................ 3
1.5 Dimensions ............................................................................................... 4
Figure 1.1 FPM-5151G Dimensions ............................................ 4
Figure 1.2 FPM-5171G Dimensions ............................................ 5
Figure 1.3 FPM-5191G Dimensions ............................................ 6
Chapter 2 Mounting ..............................................7
2.1 Mounting the Monitor ................................................................................ 8
2.1.1 Wall Mounting (Optional) .............................................................. 8
Figure 2.1 Wall Mounting............................................................. 8
2.1.2 Panel Mounting ............................................................................. 9
Figure 2.2 Panel Mounting........................................................... 9
Figure 2.3 Panel Mounting........................................................... 9
2.1.3 Rack Mounting (Optional) ........................................................... 10
Figure 2.4 FPM-5151 Rack Mounting........................................ 10
Figure 2.5 FPM-5171 Rack Mounting........................................ 11
Figure 2.6 FPM-5191 Rack Mounting........................................ 11
2.1.4 Desktop, Swing-ARM Mounting .................................................. 12
Figure 2.7 Desktop Stand .......................................................... 12
Figure 2.8 Swing Arm ................................................................ 13
Appendix A Touchscreen ......................................15
A.1 Introduction ............................................................................................. 16
A.2 Touchscreen Specifications .................................................................... 16
A.2.1 Electrical Specifications .............................................................. 16
A.2.2 Environment Specifications......................................................... 16
A.3 Installing Driver for Windows OS ............................................................ 16
Appendix B OSD Operation Keypad.....................17
B.1 OSD Board Overview.............................................................................. 18
B.1.1 OSD Button Description.............................................................. 18
Table B.1: OSD Button Description ........................................... 18
B.1.2 LED Function .............................................................................. 19
Table B.2: LED Function............................................................ 19
B.2 OSD Key Functions................................................................................. 19
B.2.1 Menu Start .................................................................................. 19
B.2.2 Input Source Select..................................................................... 20
B.2.3 Contrast/Brightness Setting ........................................................ 21
B.2.4 Geometry Menu – For DVI Input................................................. 22
B.2.5 Color Temperature Menu............................................................ 23
B.2.6 Language Menu .......................................................................... 24
B.2.7 OSD Manager ............................................................................. 25

FPM-5151G/5171G/5191G Series User Manual viii
B.2.8 Auto Configuration Menu ............................................................ 26
B.2.9 Mode Information Menu.............................................................. 27
B.2.10 Memory Recall Menu.................................................................. 28
B.2.11 Exit Menu.................................................................................... 29
B.2.12 Hot Keys ..................................................................................... 30

Chapter 1
1General Information
Sections include:
Introduction
Specifications
LCD Specification
Power Consumption
Connectors
Dimensions

FPM-5151G/5171G/5191G Series User Manual 2
1.1 Introduction
Advantech's FPM-5151G/5171G/5191G is a 15"/17”/19” color TFT LCD flat panel
monitor built specifically for industrial applications. With the optional touchscreen,
FPM-5151G/5171G/5191G is an excellent and user-friendly system control interface.
In addition to its usual application as an LED panel monitor,FPM-5151G/5171G/
5191G comes standard with direct VGA and DVI control signal inputs, making it
compatible with Industrial PCs and Workstations. Its OSD (On Screen Display)
function allows you to adjust display factors such as brightness, contrast, colors and
VGA signal information. Functions that are more and more critical as HMI users
become aware of the benefits of flat panel monitors. The whole chassis is of stainless
steel, and the front panel is of aluminum with NEMA4/IP65 compliance.
FPM-5151G/5171G/5191G also comes in a touch screen version (FPM-5151G-R/
FPM-5171G-R/FPM-5191G-R). With an 5-wire resistive type touchscreen, this
monitor can be immediately transformed into a remote control system. The
Advantech FPM-5151G/5171G/5191G is the ultimate HMI solution for your industrial
application.
1.2 Specifications
1.2.1 General
1.2.2 Touchscreen (Optional)
FPM-5151 FPM-5171 FPM-5191
Construc-
tion
Heavy-duty aluminum and steel chassis
Front panel Aluminum, NEMA4 / IP65 Compliant
Control OSD (On Screen Display) control pad on rear
Mounting Panel, wall, desktop, VESA ARM or rack (with rackmount)
Dimensions
(W x H x D)
449.92 x 315.63 x 50.5 mm
(17.71”x 12.43”x 2”)
481.9 x 355.9 x 55 mm
(18.97”x 14.01”x 2.17”)
481.93 x 384.6 x 59 mm
(18.97”x 15.14”x 2.32”)
Weight 6 kg (13.22 lbs) 8 kg (17.63 lbs) 10 kg (22.04 lbs)
FPM-5151 FPM-5171 FPM-5191
Type 5 wire, analog resistive
Resolution 2048*2048
Controller USB & RS-232 interface
Power Consump-
tion
+5 V @ 200 mA
Life Span 100 million activation (typical) at a single point with a 5/8"
diameter silicone finger with a 350 g load at 2 touches per second

3 FPM-5151G/5171G/5191G Series User Manual
Chapter 1 General Information
1.3 LCD Specification
1.4 Connectors
The following connectors are situated on the left hand side of the FPM-5151G/
5171G/5191G series:
VGA Port (DB-15)
This DB-15 connector can be connected to the system via the external 15-pin
DB-15 connector located on the left side of the system unit.
DVI Port (DVI-D)
Connected with a standard DVI connector thru I/O port of this unit. Only sup-
ports digital signals
Touchscreen Connector (DB-9) (optional)
This connector will be present only if a touchscreen is installed. It must be con-
nected to the RS-232 port of the PC. The touchscreen cable is included with all
orders which include the touchscreen option.
Touchscreen Connector (USB) (Optional)
This connector will be present only if a touchscreen is installed. It must be con-
nected to the USB port of the PC. The touchscreen cable is included with all
orders which include the USB touchscreen option.
Plug-In Block 3P Male (ME050-50803) DC12-30V
This block connector can be connected via the external plug-in block 3P with
flanges Female MC211-F103 connector
FPM-5151 FPM-5171 FPM-5191
Display Type XGA TFT (LED) SXGA TFT (LED) SXGA TFT (LED)
Display Size 15” 17” 19”
Max. Colors 16.2M 16.7M 16.7M
Max. Resolution 1024 x 768 1280 x 1024 1280 x 1024
View Angle (H/V°) 160/140 170/160 170/160
Luminance 400 cd/m2 350 cd/m2 350 cd/m2
Storage Temperature -40 ~ 85°C -30 ~ 85°C -20 ~ 60°C
Operating Temperature 0 ~ 50°C 0 ~ 50°C 0 ~ 50°C
Contrast Ratio 700:1 1000:1 1000:1
Lamp Life Time(MTBF) 50,000 hrs. 50,000 hrs. 50,000 hrs.
Note! RS-232 & USB touchscreen interface does not allow connection into the
system at the same time, but it can be changed via switch.

FPM-5151G/5171G/5191G Series User Manual 4
1.5 Dimensions
Figure 1.1 FPM-5151G Dimensions

 
 




3DQHO&XWRXW'LPHQVLRQ[PP[

5 FPM-5151G/5171G/5191G Series User Manual
Chapter 1 General Information
Figure 1.2 FPM-5171G Dimensions
 
 
 
 
 
 
 
 
 
 
3DQHO&XWRXW'LPHQVLRQ[PP[

FPM-5151G/5171G/5191G Series User Manual 6
Figure 1.3 FPM-5191G Dimensions





3DQHO&XWRXW'LPHQVLRQ[PP[

Chapter 2
2Mounting
Wall Mounting
Panel Mounting
Rack Mounting
Desktop Mounting
Swing Arm Mounting

FPM-5151G/5171G/5191G Series User Manual 8
2.1 Mounting the Monitor
The FPM-5151G/5171G/5191G Series can be mounted in many different ways. The
versatility of the FPM-5151G/5171G/5191G mounts enable it to be mounted on your
desk or anywhere else.
2.1.1 Wall Mounting (Optional)
FPM-5151G/5171G/5191G can be mounted directly on a wall with panel mounting
brackets. Customers must order the stand kit for FPM-5151G/5171G/5191G. Please
refer to Figure 2.1 and follow the following steps to mount FPM-5151G/5171G/5191G
on a wall:
1. Screw the hook and desk-stand brackets on the wall.
2. Attach 4 screws around the bracket
3. Put the Industrial monitor into the screws around the bracket
Figure 2.1 Wall Mounting
Note! The below rack mounting kit can be used for desktop mounting, refer to
section 2.1.4.1 for detail information.)
Part No. of FPM-5151G’s optional rack
mounting kit:
FPM-5151G-SMKE
(can be used for FPM-5171G)
Part No. of FPM-5171G’s optional rack
mounting kit:
FPM-5171G-SMKE
(can be used for FPM-5151G)
Part No. of FPM-5191G’s optional rack
mounting kit:
FPM-5191G-SMKE( FPM-5191G only)

9 FPM-5151G/5171G/5191G Series User Manual
Chapter 2 Mounting
2.1.2 Panel Mounting
FPM-5151G/5171G/5191G can be mounted directly on a panel with additional
mounting brackets. Please refer to Figure 2.2 and follow the following steps:
1. Fix 10pcs panel bracket around the industrial monitor, refer to the below figure.
2. Fix into the panel by screwing the bracket.
Figure 2.2 Panel Mounting
Figure 2.3 Panel Mounting
Note! You can use the materials provided in the accessory box for panel
mounting!

FPM-5151G/5171G/5191G Series User Manual 10
2.1.3 Rack Mounting (Optional)
If you need to install the FPM-5151G/5171G/5191G on a rack, you must order the
rack mounting kit for FPM-5151G/5171G/5191G. Attach the rack mounting brackets
on FPM-5151G/5171G/5191G with the screws, then affix the monitor in the rack.
Refer to Figure 2.3 for FPM-5151G’s rack mounting.
Refer to Figure 2.4 for FPM-5171G’s rack mounting.
Refer to Figure 2.5 for FPM-5191G’s rack mounting.
Note:
Figure 2.4 FPM-5151 Rack Mounting
Part No. of FPM-5151G’s optional rack
mounting kit:
IPPC-6152A-RMKE (FPM-5151G only)
Part No. of FPM-5171G’s optional rack
mounting kit:
IPPC-6172A-RMKE (FPM-5171G only)
Part No. of FPM-5191G’s optional rack
mounting kit:
IPPC-6192A-RMKE (FPM-5191G only)

11 FPM-5151G/5171G/5191G Series User Manual
Chapter 2 Mounting
Figure 2.5 FPM-5171 Rack Mounting
Figure 2.6 FPM-5191 Rack Mounting

FPM-5151G/5171G/5191G Series User Manual 12
2.1.4 Desktop, Swing-ARM Mounting
The FPM-5151G/5171G/5191G Series can be mounted in other ways, such as
desktop and swing-arm.
2.1.4.1 Desktop Stand
FPM-5151G/5171G/5191G can be mounted as stand in the desk directly by a
additional mounting brackets. Customers must order the stand kit for FPM-5151G/
5171G/5191G. Please refer to figure 2.6 and follow these steps:
Note (The below optional mounting kit can also be used for wall mounting, refer to
section 2.1.4.1 for detail information.)
Figure 2.7 Desktop Stand
Part No. of FPM-5151G’s optional rack
mounting kit:
FPM-5151G-SMKE
(can be used for FPM-5171G)
Part No. of FPM-5171G’s optional rack
mounting kit:
FPM-5171G-SMKE
(can be used for FPM-5151G)
Part No. of FPM-5191G’s optional rack
mounting kit:
FPM-5191G-SMKE
( FPM-5191G only)