Advantech ASMB-310IR Installation and operation manual

ASMB-310IR Startup Manual 1
Before you begin installing your card, please make sure that
the following items have been shipped:
1. 1 x ASMB-310IR/310 CEB motherboard
2. 1 x ASMB-310IR Startup Manual
3. 1 x Driver CD (user's manual is included)
4. 2 x Serial ATA HDD data cables
5. 2 x LGA 1366 2U/4U CPU Cooler
6. 1 x I/O port bracket
7. 2 x SATA power cable
8. 1 x Warranty card
If any of these items are missing or damaged, please contact
your distributor or sales representative immediately.
Note:  AcrobatReaderisrequiredtoviewanyPDFle.
Acrobat Reader can be downloaded at: www.
adobe.com/Prodindex/acrobat/readstep.html (Ac-
robat is a trademark of Adobe).
General
ASMB-310IR/310 (Dual 1366 Socket CEB Server Board with
2 PCIe x16 Expansion Slots)
Startup Manual
• PCIe architecture: The Intel E5520 PCH chipset supports
36 PCIe lanes
• Intel latest dual processor platform: ASMB-310IR/310
support two Intel Latest 5500/5600 Quad/Dual core Pro-
cessor
• High performance I/O capability: Dual Gigabit LAN via
PCIe x1 bus, one PCIe x4 slot, 6 SATAII connectors and
11 USB 2.0 ports
• Standard CEB form factor with industrial features:
ASMB-310IR provides industrial features like long prod-
uct life, reliable operation under wide temperature range,
watchdog timer, etc
• SAS hard drive support: Embedded LSI 1068E SAS
controller which can support eight SAS/SATA HDD with
software RAID 0,1,1E (for ASMB-310IR only)
• IPMI 2.0 support: ASMB-310IR equip Aspeed 2050 BMC
chip supports IPMI 2.0 (Intelligent Platform Management
Interface 2.0) via dedicated LAN port
• KVM over IP: ASMB-310IR KVM over IP function
Graphic Interface
• Controller: ASPEED AST2050 controller with 64 MB VGA
memory provides basic
Ethernet Interface
• LAN1: 10/100/1000 Mbps GbE LAN Intel 82574L
• LAN2: 10/100/1000 Mbps GbE LAN Intel 82567LM
Mechanical and Environmental
• Dimensions: 304.8 x 257.05 mm
• Operating temperature: 0 ~ 50° C
The board has a number of jumpers that allow you to con-
gureyoursystemtosuityourapplication.
Specications
Packing List
For more information on this and other Advantech prod-
ucts, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our sup-
port website at:
http://service.advantech.com.tw/support/
This manual is for the ASMB-310IR Series Rev. A1.
Part No. 2006310R11
Printed in Taiwan
2nd Edition
Sept. 2011

2 ASMB-310IR Startup Manual
The table below lists the function of each of the jumpers
and connectors.
Jumpers and connectors
Jumpers
Label Function
JP_CMOS1
CMOS Clear
JP_BMC1 BMC Enable (2-3) or Disable (1-2)
Connectors
Label Function
ATX_8P_P0 SSI EPS 12 V auxiliary power connector
(for CPU0) and memory
ATX_8P_P1 SSI EPS 12 V auxiliary power connector
(for CPU1) and memory
ATX_P24 SSI EPS 24-pin main power connector
(for system)
COM2 Serial port: RS-232
CPU0 Intel LGA1366 CPU0 socket
CPU1 Intel LGA1366 CPU1 socket
CPUFAN0 CPU0 fan connector (4-pin)
CPUFAN1 CPU1 fan connector (4-pin)
DIMMP0A_1 Channel A DIMM1 of CPU0
DIMMP0B_1 Channel B DIMM1 of CPU0
DIMMP0C_1 Channel C DIMM1 of CPU0
DIMMP1A_1 Channel A DIMM1 of CPU1
DIMMP1B_1 Channel B DIMM1 of CPU1
DIMMP1C_1 Channel C DIMM1 of CPU1
FPPH1 Front panel pin header connector
HDAUD1 HD audio Interface connector
IPMB_TB1 IPMB connector (For ASMB-310IR only)
LANLED1 LAN1/2 LED extension connector
LPC2 LPC port for debug
PCIEX16_1 PCIe x16 slot
PCIEX16_3 PCIe x16 slot
PCIEX4_5 PCIe x4 slot
PCIEX4_6 PCIe x4 slot (For ASMB-310IR only)
PCIEX8_2 PCIe x8 slot
PCIEX8_4 PCIe x8 slot
SAS0 SAS0 hard drive connector
(For ASMB-310IR only)
SAS1 SAS1 hard drive connector
(For ASMB-310IR only)
SAS2 SAS2 hard drive connector
(For ASMB-310IR only)
SAS3 SAS3 hard drive connector
(For ASMB-310IR only)
SAS4 SAS4 hard drive connector
(For ASMB-310IR only)
SAS5 SAS5 hard drive connector
(For ASMB-310IR only)
SAS6 SAS6 hard drive connector
(For ASMB-310IR only)
SAS7 SAS7 hard drive connector
(For ASMB-310IR only)
SATA0 Serial ATA0 hard drive connector
SATA1 Serial ATA1 hard drive connector
SATA2 Serial ATA2 hard drive connector
SATA3 Serial ATA3 hard drive connector
SATA4 Serial ATA4 hard drive connector
SATA5 Serial ATA5 hard drive connector
SGPIOA1 GPIO connector for SAS0 ~ SAS3
(For ASMB-310IR only)
SGPIOB1 GPIO connector for SAS4 ~ SAS7
(For ASMB-310IR only)
SYSDFAN1 System fan connector (4-pin)
SYSRFAN1 System fan connector (4-pin)
SYSUFAN1 System fan connector (4-pin)
USB10 USB port 10
USB67 USB port 6, 7
USB89 USB port 8, 9
On-board LED
Label Function
5 V_LED1
Power on LED
5 VSB_LED2 Standby LED
Jumpers and Connectors
Jumpers and Connectors

ASMB-310IR Startup Manual 3
The drivers for the ASMB-310IR are located on the software
installation CD. Please click through the folder and follow the
screen instruction to install it.
Caution! The computer is supplied with a battery-powered
realtime clock circuit. There is a danger of explo-
sion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries ac-
cording to manufacturer’s instructions.
The device complies with the requirements in Part 15 of the
FCC rules. Operation is subject to the following two condi-
tions:
1. This device may not cause harmful interference;
2. This device must accept any interference received, in-
cluding interference that may cause undesired opera-
tion.
CMOS1: Clear CMOS
Pins Result
1-2
Keep CMOS data (Default)
2-3 Clear CMOS data
Keep CMOS data Clear CMOS data
Jumpers and Connectors
Declaration of Conformity
Board Diagram
LPC2
USB67
USB89
USB10
SATA0
SATA1
SATA2
SATA3
SATA4
SATA5
HDAUD1
COM2
SGPIOA1
SGPIOB1
SYSDFAN1
FPPH1
JP_CMOS1
SYSUFAN1
SAS0
SAS1
SAS2
SAS3
SAS4
SAS5
SAS6
SAS7
SYSRFAN1
CPUFAN0 ATX_P24
ATX_8P_P0
DIMMP1A_1
DIMMP1A_1
DIMMP1A_1
DIMMP1A_1
DIMMP1A_1
DIMMP1B_1
DIMMP0C_1
DIMMP1C_1
DIMMP0A_1
DIMMP0B_1
CPU0
CPU1
LANLED1
CPUFAN1
JP BMC1
IPMB_TB1
PCIEX8_4 PCIEX16_3
PCIEX8_2
PCIEX4_6
PCIEX4_5
PCIEX16_1
ATX_8P_P1
5 VSB_LED2
5 V_LED1
Intel 82567LM
Intel 82574L
Aspeed
AST1100J
AST2050
ICH10R
Intel 5520
SAS LSI
1068E
Winbond
W83627DHG
Software Installation
Installation Note
1
1
Figure 1: Board Diagram