Advantech PCM-3353 User manual

PCM-3353
PC/104+ SBC w/AMD LX800,
VGA, LCD, LAN, USB2.0 and CF
User Manual

PCM-3353 User Manual ii
Copyright
This document is copyrighted, © 2006. All rights are reserved. The origi-
nal manufacturer reserves the right to make improvements to the products
described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmit-
ted in any form or by any means without the prior written permission of
the original manufacturer. Information provided in this manual is
intended to be accurate and reliable. However, the original manufacturer
assumes no responsibility for its use, nor for any infringements upon the
rights of third parties that may result from such use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIA Technologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business
Machines Corporation.
Intel, Pentium, Celeron, and MMX are registered trademarks of Intel Cor-
poration.
Microsoft Windows®is a registered trademark of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
All other product names or trademarks are properties of their respective
owners.
For more information on this and other products, please visit our websites
at: http://www.emacinc.com
For technical support and service, please visit our support website at:
http://www.emacinc.com/support
This manual is for the PCM-3353.
Part No. 20063353112nd Edition
Printed in Taiwan June 2008

iii
Packing List
Before you begin installing your card, please make sure that the following
materials have been shipped:
• 1 x PCM-3353 SBC
• 1 x Power cable
• 1 x Audio cable
• 1 x Four COM cable
• 1 x Keyboard/Mouse cable
• 1 x Y cable (for KB/MS extension)
• 1 x Ethernet RJ-45 Conn. conversion cable
• 1 x LPT port cable
• 1 x IDE cable
• 1 x VGA cable
• 2 x USB cable (bracket type with two USB ports)
• 1 x Startup manual (Optional)
• 1 x CD-ROM (Optional)
If any of these items are missing or damaged, contact your distributor or
sales representative immediately.
Model No. List Description
PCM-3353F-L PC/104+ SBC w/AMD LX800, VGA, LVDS,
LAN, USB and CF
PCM-3353Z-L PCM-3353F-L with Phoenix Gold package
PCM-3353Z2-L PCM-3353F-L with Phoenix Platinum package

PCM-3353 User Manual iv
AdditionalInformationandAssistance
1.Visit the our web site at www.emacinc.com where you can
find the latest information about the product.
2.Contact your distributor, sales representative, or customer service
center for technical support if you need additional assistance.
Please have the following information ready before you call:
• Product name and serial number
• Description of your peripheral attachments
• Description of your software (operating system, version, application
software, etc.)
• A complete description of the problem
• The exact wording of any error messages

v
Caution!
Achtung!
This device complies with the requirements in part
15 of the FCC rules: Operation is subject to the fol-
lowing two conditions:
1.This device may not cause harmful interference,
and
2.This device must accept any interference
received, including interference that may cause
undesired operation
This equipment has been tested and found to com-
ply with the limits for a Class A digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is oper-
ated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. Operation of
this device in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his/her own
expense. The user is advised that any equipment
changes or modifications not expressly approved
by the party responsible for compliance would void
the compliance to FCC regulations and therefore,
the user's authority to operate the equipment.
There is a danger of a new battery exploding if it is
incorrectly installed. Do not attempt to recharge,
force open, or heat the battery. Replace the battery
only with the same or equivalent type recom-
mended by the manufacturer. Discard used batter-
ies according to the manufacturer’s instructions

PCM-3353 User Manual vi

vii
Contents
Chapter 1 Introduction......................................................2
1.1 Introduction....................................................................... 2
1.2 Features ............................................................................. 2
1.3 Specifications.................................................................... 2
1.3.1 Standard PC/104 H-EBX SBC Functions....................... 2
1.3.2 VGA/LVDS Interface..................................................... 3
1.3.3 Ethernet Interface............................................................ 3
1.3.4 Audio Function ............................................................... 3
1.3.5 OS support ...................................................................... 3
1.3.6 Mechanical and Environmental ...................................... 4
1.4 Board layout: dimensions.................................................. 5
Figure 1.2:Board layout: Dimensions (Solder Side)....... 6
Chapter 2 Installation........................................................8
2.1 Jumpers.............................................................................. 8
Table 2.1:Jumper/Switch Setting:................................... 8
2.2 Connectors......................................................................... 8
Table 2.2:Connector Table: ............................................ 8
2.3 Locating Connectors ....................................................... 10
Figure 2.1:Connectors (component side)......................10
Figure 2.2:Connectors (solder side)..............................10
2.4 Setting Jumpers ............................................................... 11
2.5 Installing SO-DIMMs ..................................................... 12
2.6 IDE, CDROM hard drive connector (CN11).................. 12
2.6.1 Connecting the hard drive............................................. 12
2.7 Solid State Disk............................................................... 13
2.7.1 Compact Flash (CN41)................................................. 13
2.8 Parallel port connector (CN19)....................................... 13
2.9 Keyboard and PS/2 mouse connector (CN18) ................ 13
2.10 Power connectors (CN38)............................................... 13
2.10.1 Main power connector, +5 V, +12 V (CN38)............... 13
2.10.2 Power Reset button.......................................................13
2.11 Audio interfaces (CN34/35)............................................ 14
2.11.1 Audio connector Audio-out(CN35), Audio-in(CN34) .14
2.12 COM port connector (CN20,CN30)................................ 14
2.12.1 Serial Port RS-422/485 (CN20)....................................14
Table 2.3:Serial Port RS-422/485 (CN39).................... 14
2.13 VGA/LCD interface connections.................................... 14
2.13.1 CRT display connector (CN27).................................... 14
2.13.2 TTL TFT LCD connector (CN4)..................................14
2.13.3 LVDS TFT LCD connector (CN42).............................15

PCM-3353 User Manual viii
2.14 Ethernet configuration..................................................... 15
2.14.1 100Base-T connector (CN26).......................................15
2.15 Watchdog timer configuration ........................................ 15
2.16 USB connectors (CN15,CN17)....................................... 15
2.17 GPIO (General Purpose Input Output) (CN36/CN37).... 16
Chapter 3 Award BIOS Setup.........................................18
3.1 Introduction..................................................................... 18
3.1.1 CMOS RAM Auto-backup and Restore.......................18
3.2 Entering Setup................................................................. 19
Figure 3.1:Award BIOS Setup initial screen ................ 19
3.3 Standard CMOS Setup.................................................... 20
3.4 Standard CMOS Setup ................................................... 20
3.5 Advanced BIOS Features................................................ 20
Figure 3.2:Advanced BIOS features screen.................. 21
3.5.1 Virus Warning............................................................... 21
3.5.2 First/Second/Third/Other Boot Device......................... 21
3.5.3 Boot Up NumLock Status............................................. 21
3.5.4 Gate A20 Option........................................................... 21
3.5.5 Typematic Rate Setting................................................. 21
3.5.6 Typematic Rate (Chars/Sec)......................................... 22
3.5.7 Typematic Delay (msec)............................................... 22
3.5.8 Security Option............................................................. 22
3.6 Integrated Peripherals...................................................... 22
3.6.1 IDE Master/Slave PIO/UDMA Mode,.......................... 22
3.6.2 Integrated peripherals screen ........................................ 23
3.6.3 Onboard LAN Control.................................................. 23
3.6.4 IDE HDD Block Mode................................................. 23
3.6.5 Onboard Serial Port ...................................................... 23
3.6.6 Onboard Parallel Port.................................................... 23
3.6.7 Parallel Port Mode........................................................ 23
3.6.8 EPP Mode Select .......................................................... 24
3.6.9 ECP Mode Use DMA................................................... 24
3.7 Power Management Setup............................................... 24
Figure 3.3:Power management setup screen................. 24
3.7.1 ACPI function............................................................... 24
3.7.2 Power Management ...................................................... 24
3.7.3 Video Off In Suspend................................................... 25
3.7.4 Modem Use IRQ...........................................................25
3.7.5 HDD Power Down........................................................ 25
3.7.6 PowerOn By Modem .................................................... 25
3.7.7 PowerOn By Alarm ......................................................25
3.7.8 Primary IDE 0 (1) and Secondary IDE 0 (1) ................ 25
3.7.9 FDD, COM, LPT PORT............................................... 25
3.7.10 PCI PIRQ [A-D]# ......................................................... 25

ix
3.8 PnP/PCI Configurations.................................................. 26
3.8.1 PnP OS Installed........................................................... 26
Figure 3.4:PnP/PCI configurations screen....................26
3.8.2 Reset Configuration Data.............................................. 26
3.8.3 Resources controlled by:............................................... 26
3.8.4 PCI/VGA Palette Snoop ............................................... 26
3.9 PC Health Status.............................................................. 27
3.9.1 PC Health Status Screen ............................................... 27
3.10 Password Setting ............................................................. 27
3.11 Save & Exit Setup........................................................... 28
3.12 Exit Without Saving........................................................ 28
Chapter 4 PCI SVGA/LCD Setup ..................................30
4.1 Introduction..................................................................... 30
4.1.1 Display type.................................................................30
4.1.2 Dual Simultaneous Display ......................................... 30
4.1.3 CMOS setting for panel type....................................... 30
4.2 Connections to Two Standard LCDs...............................31
4.2.1 AMD Geode LX ........................................................... 31
Table 4.1:Connections to Sharp LQ121S1DG31 / PCM-
3353 .................................................................. 31
4.3 Installation of the SVGA Driver ..................................... 32
4.3.1 Installation chipset AES driver..................................... 33
4.3.2 Installation of VGA driver............................................ 36
4.3.3 PCI Bridge .................................................................... 40
4.4 Further Information......................................................... 42
Chapter 5 Audio Setup.....................................................44
5.1 Introduction..................................................................... 44
5.2 Driver installation............................................................ 44
5.2.1 Before you begin........................................................... 44
5.2.2 Windows XP drivers..................................................... 45
Chapter 6 Ethernet Interface..........................................50
6.1 Introduction..................................................................... 50
6.2 Installation of Ethernet driver ......................................... 50
6.2.1 Installation for Windows XP ........................................ 51
6.3 Further information ......................................................... 56
Appendix A Pin Assignments ............................................58
A.1 Jumper and Connector Tables......................................... 58
Table A.1:SW1, CF Master / Slave Selector................ 58
Table A.2:J3, Clear CMOS........................................... 58
Table A.3:CN39, COM2 Setting .................................. 59
Table A.4:J5, PCI VI/O POWER ................................. 59
Table A.5:CN42, LVDS LCD I/F................................. 60

PCM-3353 User Manual x
Table A.6:CN38, Power Input...................................... 60
Table A.7:CN4, TFT LCD I/F...................................... 61
Table A.8:CN5, Inverter Power.................................... 63
Table A.9:CN6, SMBus................................................63
Table A.10:CN32, Reset / Buzzer pin header............... 64
Table A.11:CN36, GPIO1 ............................................ 64
Table A.12:CN37, GPIO2 ............................................ 65
Table A.13:CN11, IDE................................................. 65
Table A.14:CN27, CRT................................................ 67
Table A.15:CN15, USB1/2........................................... 67
Table A.16:CN17, USB3/4........................................... 68
Table A.17:CN30, COM1/2/3/4 ................................... 69
Table A.18:CN19, Print Port ........................................71
Table A.19:CN20, RS422/485......................................72
Table A.20:CN35, AUDIO-OUT ................................. 72
Table A.21:CN34, AUDIO-IN ..................................... 73
Table A.22:CN23, ISA -5V & -12V Input ................... 73
Table A.23:CN26, LAN1.............................................. 74
Table A.24:CN18, KB/MS ........................................... 74
Table A.25:CN40, DDR RAM SOCKET..................... 75
Table A.26:CN41, CF SOCKET .................................. 75
Appendix B System Assignments......................................78
B.1 System I/O Ports.............................................................. 78
Table B.1:System I/O ports .......................................... 78
B.2 1st MB memory map....................................................... 79
Table B.2:1st MB memory map ................................... 79
B.3 DMA channel assignments.............................................. 79
Table B.3:DMA channel assignments .......................... 79
B.4 Interrupt assignments ...................................................... 80
Table B.4:Interrupt assignments................................... 80
Appendix C Mechanical Drawings.....................................82
C.1 Mechanical Drawings...................................................... 82
Figure C.1:PCM-3353 Mech Drawing (Comp Side)....82
Figure C.2:PCM-3353 Mech Drawing (Sol Side)........82

CHAPTER
1
General Information
This chapter gives background infor-
mation on the PCM-3353.
Sections include:
• Introduction
• Features
• Specifications
• Board layout and dimensions

PCM-3353 User Manual 2
Chapter 1 Introduction
1.1 Introduction
The PCM-3353 is a fanless, best-cost, performance PC/104+ SBC (Single
Board Computer) geared to satisfy the needs for various industrial comput-
ing equipment. PCM-3353 is ideal for communication, gaming and medical
applications that require flat panel support using digital displays with TTL
and LVDS interfaces and single Ethernet ports.
For those who want superior performance for various low-power embed-
ded applications, PCM-3353 uses an AMD LX-800 processor clocked at
500 MHz, in conjunction with onboard DDR333 system memory.
PCM-3353 offers convenient connector layout, easy assembly, multiple I/
O, and includes single 10/100Mbps Ethernet, four USB (Universal Serial
Bus) 2.0 and four serial ports for easy system expansibility.
1.2 Features
• AMD low power LX800 500MHz Processor
• Supports DDR memory
• Supports 24-bit TFT LCD interface
• Supports 18-bit LVDS interface
• Supports 1 x 100Base-T Fast Ethernet
• Supports Four USB2.0 ports
• Supports Four COM ports
• PC/104+ expansion interface
1.3 Specifications
1.3.1 Standard PC/104 Half-EBX SBC Functions
• CPU: AMD Geode® LX800 processor, up to 500 MHz
• System Memory: Onboard Memory, support Double Data Rate (DDR)
SDRAM, accept 128/256 MB, DDR333 SDRAM
• 2nd Cache Memory: 128 KB on the processor
• System Chipset: AMD Geode LX800

3 Chapter1
• BIOS: AWARD 4Mbit Flash BIOS
• Watchdog timer: 255 levels timer interval
• Expansion Interface: PC/104+
• Battery: Lithium 3V/196 mAH
• Power management: ACPI supported
• Enhanced IDE interface: One channel supports up to
two EIDE devices. BIOS auto-detect, PIO Mode 3 or
Mode 4, supports UDMA 33/66 mode
• Serial ports: Four serial RS-232 ports in one 40 pin connector (CN30:
COM1/2/3/4). RS-422 and RS-485 in one pinheader (CN20) and
can be configured via CN39 connector.
• Parallel port: One parallel port, supports SPP/EPP/ECP mode
• Keyboard/mouse connector: Supports one standard PC/AT keyboard
and a PS/2 mouse
• Audio: Supports AC97 Audio stereo sound
• USB: Four USB 2.0 ports compliant universal serial bus ports
• CF: Solid State Disk (SSD) supports one 50-pin socket for CFC type I
(type II optional)
1.3.2 VGA/LVDS Interface
• Chipset: AMD Geode LX800
•
Memory Size: Optimized Shared Memory Architecture, supports 64 MB frame
buffer using system memory
• Resolution: CRT resolution: up to 1600 x 1200 x 16 bpp at 100 Hz and
up to 1024 x 768 x 32 bpp at 60 Hz for TFT LCD
• LCD Interface: Supports up to 24-bit TFT LCD (TTL signal)
Supports 18-bit LVDS LCD
• Dual Simultaneous Display: CRT + LCD, CRT + LVDS
1.3.3 Ethernet Interface
• Chipset supports: 1 x 10/100 Mbps - Intel 82551ER
• Interface: 1 x internal box header
• Standard IEEE 802.3u (100 BASE-T) protocol compatible
1.3.4 Audio Function
• Audio controller: Realtek ACL202/ACL650 chipset, supports AC97
3D Audio stereo sound
• Audio interface: Microphone in, Line in, Line out
1.3.5 OS support
• This board supports Win XP, Win CE and Win XPe.

PCM-3353 User Manual 4
• For further information about OS support in your PCM-3353, visit the
following web resource website: www.emacinc.com or please
contact technical support center
1.3.6 Mechanical and Environmental
• Dimensions: 96 x 115 mm (3.77"x 4.05")
Mechanical Drawing (dxf file) is available.
• Power Supply Type: AT
• Power Requirement: +5 V ± 5%, +12 V ± 5% (Optional), (5V only,
12V optional for PC104 add on card and LCD inverter)
• Power Consumption:
(Geode LX800, 256 MB DDR333)
Max: +5 V @ 1.51 A, +12 V @ 0.1 A
Typical: +5 V @ 1.35 A, +12 V @ 0.1A
• Operating temperature: 0 ~ 60°C (32 ~ 140°F)
• Operating Humidity: 10% ~ 90% relative humidity, non-condensing
• Weight: 0.85 kg (reference weight of total package)

5 Chapter1
1.4 Board layout: dimensions
Figure 1.1: Board layout: Dimensions (Component Side)

PCM-3353 User Manual 6
Figure 1.2: Board layout: Dimensions (Solder Side)

CHAPTER
2
Installation
This chapter explains the setup proce-
dures of the PCM-3353 hardware,
including instructions on setting jump-
ers and connecting peripherals,
switches and indicators. Be sure to read
all safety precautions before you begin
the installation procedure.

PCM-3353 User Manual 8
Chapter 2 Installation
2.1 Jumpers
The PCM-3353 has a number of jumpers that allow you to configure your
system to suit your application. The table below lists the functions of the
various jumpers.
2.2 Connectors
Onboard connectors link the PCM-3353 to external devices such as hard
disk drives, a keyboard, or floppy drives. The table below lists the func-
tion of each of the board’s connectors.
Table 2.1: Jumper/Switch Setting:
J3 Clear CMOS
J5 PCI VI/O Power Selector
CN39 COM2 Setting
SW1 CF Master / Slave Selector
Table 2.2: Connector Table:
CN4 TFT LCD I/F
CN5 Inverter Power
CN6 SMBus
CN11 IDE
CN15 USB1/2 / CN17 USB 3/4
CN18 KB/MS
CN19 Print Port
CN20 RS422/485
CN23 ISA -5V & -12V Input
CN26 LAN
CN27 CRT
CN30 COM1/2/3/4
CN32 Reset / Buzzer pin header
CN35 AUDIO-OUT / CN34 AUDIO-IN
CN36 GPIO1 / CN37 GPIO2
CN38 Power Input
CN40 DDR RAM Socket
CN41 CF Socket

9 Chapter2
CN42 LVDS LCD I/F
CN43 Inverter Power (LVDS)

PCM-3353 User Manual 10
2.3 Locating Connectors
Figure 2.1: Connectors (component side)
Figure 2.2: Connectors (solder side)