Advantech MIO-5272 User manual

The information contained in this document has been carefully researched and is, to the best
of our knowledge, accurate. However, we assume no liability for any product failures or
damages, immediate or consequential, resulting from the use of the information provided
herein. Our products are not intended for use in systems in which failures of product could
result in personal injury. All trademarks mentioned herein are property of their respective
owners. All specifications are subject to change without notice.
Manual
ADVANTECH
MIO-5272

User Manual
MIO-5272
6th Gen Intel® Core™ U-series (i7/i5/
i3/Celeron®*), 3.5" MI/O-Compact
SBC, DDR3L, VGA, HDMI, 48-bit
LVDS, 2 GbE, 2 Mini PCIe, mSATA,
Fanless, MIOe

MIO-5272 User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2016
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel® is a trademark of Intel® Corporation.
AMI is a trademark of American Megatrends, Inc.
IBM, PC, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Microsoft Windows®, DirectX® is a registered trademark of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
For more information on this and other Advantech products, please visit our websites
at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our support website at:
http://support.advantech.com/
This manual is for the MIO-5272.
Part No. 2006527210 Edition 1
April 2016

iii MIO-5272 User Manual
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.

MIO-5272 User Manual iv
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-
sure products.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is oper-
ated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio communications. Opera- thin of
this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
flatterer. Discard used batteries according to the manufacturer's instruc-
tions.

v MIO-5272 User Manual
Packing List
Before you begin installing your card, please make sure that the following materials
have been shipped:
If any of these items are missing or damaged, contact your distributor or sales repre-
sentative immediately.
Optional MIOe Module
Part Number Description
MIOe-210-D6A1E 4 x RS232/422/485 2x RS422/485 with DSUB connector,
8-bit GPIO
MIOe-220-B3A1E13 x Intel® Gigabit Ethernet with PCIe Switch
MIOe-230-L0A1E Displayport to 48-bit LVDS
MIOe-DB5000-01A1E MI/O extension evaluation board
MIOe-3674-AE24-port PoE ports MIOe Module
MIOe-3680-AE 2-Port CAN-Bus MIOe Module with Isolation Protection
MIOE-PWR1-00A1E 12-24V Power module
MIOE-PWR2-00A1E 9-36V Power module
1No USB support on MIOe-230
2Support with customized BIOS
Optional Accessories
Part number Description
1960074236N001 Heat spreader 145 x 84 x 16-mm MIO-5272
1935032000 Screw of Heatsink R/S 5.5 2.0 +M M3*20L ST Ni
1700002172 Internal 2 ports USB cable 17CM
1 x MIO-5272 SBC
1 x SATA Cable 30cm (p/n: 1700006291)
1 x SATA Power Cable 35cm (p/n: 1700018785)
1 x Audio Cable 20cm (p/n: 1700019584)
1 x COM RS-232 Cable 22cm (p/n: 1701200220)
1 x Heatsink (24mm) (p/n: 1960068763T001)
1 x Startup manual (p/n: 2006527200)
1 x Mini Jumper(10pcs package) (p/n: 9689000002)
1 x Screw Kit (4pcs screws for miniPCIe) (p/n: 9666525100E)
1 x SUSIAccess Pro package (p/n: 968EMLSAP1)

MIO-5272 User Manual vi

vii MIO-5272 User Manual
Contents
Chapter 1 General Information ............................1
1.1 Introduction ............................................................................................... 2
1.2 Specifications ............................................................................................ 2
1.2.1 Functional Specifications .............................................................. 2
1.2.2 OS support.................................................................................... 4
1.2.3 Mechanical Specifications............................................................. 4
1.2.4 Electrical Specifications ................................................................ 5
1.2.5 Environmental ............................................................................... 5
1.3 Block Diagram........................................................................................... 6
1.4 Board layout: dimensions.......................................................................... 6
Figure 1.1 MIO-5272 Mechanical Drawing (Top Side) ................ 6
Figure 1.2 MIO-5272 Mechanical Drawing (Bottom Side) ........... 7
Figure 1.3 MIO-5272 Mechanical Drawing (Coastline)................ 7
Figure 1.4 MIO-5272 Mechanical Drawing (with Heatsink) ......... 8
Figure 1.5 MIO-5272 Mechanical Drawing (with Heat Spreader) 8
Chapter 2 Installation............................................9
2.1 Jumpers & Switches................................................................................ 10
Table 2.1: Jumpers & Switches ................................................. 10
2.2 Connectors.............................................................................................. 10
Table 2.2: Connectors ............................................................... 10
2.3 Locating connectors & block diagram ..................................................... 11
Figure 2.1 MIO-5272 Connector Locations (Top Side).............. 11
Figure 2.2 MIO-5272 Connector Locations (Bottom Side)......... 11
Figure 2.3 MIO-5272 Connector Locations (Coastline) ............. 12
2.4 Setting Jumpers ...................................................................................... 12
2.4.1 Auto Power On Setting (J1) ........................................................ 12
Table 2.3: Auto Power On Setting (J1)...................................... 12
2.4.2 LCD Power (J2) .......................................................................... 13
Table 2.4: LCD Power (J2) ........................................................ 13
2.4.3 Clear CMOS (SW2) .................................................................... 13
Table 2.5: Clear CMOS (SW2) .................................................. 13
Chapter 3 AMI BIOS Setup .................................15
Figure 3.1 Setup program initial screen..................................... 16
3.1 Entering Setup ........................................................................................ 17
3.2 Main Setup .............................................................................................. 17
Figure 3.2 Main setup screen .................................................... 17
3.2.1 Advanced BIOS Features Setup................................................. 18
Figure 3.3 Advanced BIOS features setup screen .................... 18
Figure 3.4 PCI Subsystem Settings........................................... 19
3.2.2 Chipset........................................................................................ 32
Figure 3.5 Chipset Setup ........................................................... 32
Figure 3.6 System Agent (SA) Configuration............................. 33
3.2.3 Security ....................................................................................... 43
Figure 3.7 Password Configuration ........................................... 43
3.2.4 Boot............................................................................................. 44
Figure 3.8 Boot .......................................................................... 44
3.2.5 Save & Exit ................................................................................. 45
Figure 3.9 Save & Exit ............................................................... 45

MIO-5272 User Manual viii
Chapter 4 MIOe Installation ............................... 47
4.1 Quick Installation Guide: ......................................................................... 48
Appendix A Pin Assignments............................... 49
A.1 Jumper, Switch List and Setting.............................................................. 50
Appendix B System Assignments........................ 77
B.1 System I/O Ports..................................................................................... 78
Table B.1: System I/O Ports ...................................................... 78
B.2 DMA Channel assignments .................................................................... 78
Table B.2: DMA Channel assignments...................................... 78
B.3 1st MB memory map............................................................................... 78
Table B.3: 1st MB memory map ................................................ 78
B.4 Interrupt assignments ............................................................................. 79
Table B.4: Interrupt assignments............................................... 79

Chapter 1
1General Information
This chapter gives background
information on the MIO-5272.
Sections include:
Introduction
Specifications
Block diagram
Board layout and dimensions

MIO-5272 User Manual 2
1.1 Introduction
MIO-5272 is designed using MI/O Extension form factor (compact series, 146 x 102
mm) and powered by 6th generation of Intel® Core™ U series processors which
have low power features but also high performance computing and multimedia capa-
bilities. Based on numerous demands from embedded applications, Advantech
developed an optimized thermal solution for MIO-5272. This makes the possibility of
fanless design on this kind of high performance platform. MIO-5272 also embeds
SUSI 4.0 and WISE-PaaS/RMM created by Advantech to monitor and control system
operation effectively and remotely. These tools offer greater system reliability and a
smarter software framework for embedded customers and helps them speed up
development times.
MIO-5272 adopts the latest 64-bit, multi-core processors built on 14nm process tech-
nology for improvements in CPU processing, graphics, security and I/O flexibility.
Moreover, MIO-5272 is equipped with the latest generation graphics core (Intel® HD
Graphics 520) with DirectX 11.3, OpenGL 4.4, OpenCL 2.1 and 4K encoding/decod-
ing which increases more possibilities for multimedia application development. MIO-
5272 supports not only triple independent displays including HDMI, VGA and 48-bit
LVDS interfaces, but also low power dual 8GB 1600MHz DDR3L memory and TPM,
it’s suitable to aim various high level embedded applications.
1.2 Specifications
1.2.1 Functional Specifications
Processor: 6th Generation Intel®Core™ U-series
–i7 6600U 2.6 GHz, Dual-Cores, Four Threads
–i5 6300U 2.4 GHz, Dual-Cores, Four Threads
–i3 6100U 2.3 GHz, Dual-Cores, Four Threads
–Celeron 3955U12.0 GHz, Dual Cores, Two Threads
L3 Cache:
–i7 6600U: 4MB
–i5 6300U: 3MB
–i3 6100U: 3MB
–Celeron 3955U: 2MB
Advanced Technologies
* Intel®Turbo Boost Technology 2.02(i5/i7 series only)
* Intel®Advanced Vector Extensions 2.0 (Intel®AVX2)
Intel®Hyper-Threading Technology
Intel®Active Management Technology 11.0 (Intel®AMT 11.0, i5/i7 series only)
Intel®Trusted Execution Technology (Intel®TXT)
Intel®64 Architecture
Intel®Virtualization Technology (Intel®VT)
Intel®Advanced Encryption Standard New Instructions (Intel®AES-NI)
Enhanced Intel SpeedStep®Technology
I/O interface of Platform Controller Hub
–Integrated Serial ATA Host Controller
Data transfer rates up to 6.0 Gb/s (600 MB/s)
Integrated AHCI controller

3 MIO-5272 User Manual
Chapter 1 General Information
–USB
xHCI Host Controller, supporting 2 SuperSpeed USB 3.0 ports
One EHCI Host Controllers, supporting 2 HighSpeed USB 2.0 ports
Supports wake-up from sleeping states S1, S3
Supports legacy Keyboard/Mouse software
–Power Management
Full support of ACPI C-states as implemented by the following processor C-
states: — C0, C1, C1E, C3, C6, C7, C8, C9, C10
Enhanced Intel SpeedStep® Technology
System Memory Support
–Non-ECC, DDR3L/DDR3L-RS and LPDDR3 memory with dual SO-DIMM up
to 16GB
–DDR3L/DDR3L-RS I/O Voltage of 1.35V
1333 MT/s (PC3-10600), 1600 MT/s (PC3-12800)
–64-bit wide channels
–Intel® Fast Memory Access (Intel® FMA):
Just-in-Time Command Scheduling
Command Overlap
Out-of-Order Scheduling
Integrated Graphics Controller
–Contains a generation 9 graphics core architecture (Intel® HD Graphics 520/
510)
–Intel® QuickSync & Clear Video Technology HD Supportt
–Full Hardware Accelerated Video Decode: AVC/VC1/MPEG2/HEVC/VP8/
JPEG.
–OpenGL4.4 and OpenCL2.1 support
–DirectX 12, DirectX 11.3, DirectX 11.2, DirectX 11.1, DirectX 10, DirectX 9
support
–Multi-display interfaces: VGA, HDMI on rear I/O, Dual Channel 24-bit LVDS,
DisplayPort1from MIOe
–Support Extend, Clone and Collage mode with multi-display device
–Dual Display:
Any two combination between: VGA, LVDS, HDMI (from Rear I/O line)
–Triple Display:
VGA+HDMI+ LVDS
–Integrated Dual-channel LVDS support resolution up to 1920x1200 at 60 Hz
–Analog RGB display (VGA) output up to resolution 1920 x 1200 with 60 Hz, or
2048 x 1152 @ 60Hz with reduced blanking.
–HDMI interface supports the HDMI 1.4a specification with audio up to
4096x2160 at 24 Hz (Supporting 4K display required two DDR channels of
same size).
Gigabit Ethernet
–Port1: Integrated Intel 100 Series Chipset (MAC) + i219 GbE (PHY)
Integrated ASF Management Controller
10/100/1000 BASE-T IEEE 802.3 specification conformance
Supports the Energy Efficient Ethernet (EEE) IEEE802.3az specification
Supports up to 9 KB jumbo frames (full duplex)
* 802.1as/1588 conformance
–Port2: i210 Gigabit Ethernet Controller
Flow Control Support compliant with the 802.3X Specification
Compliant with the 1 Gb/s IEEE 802.3 802.3u 802.3ab Specifications

MIO-5272 User Manual 4
Magic Packet* wake-up enable with unique MAC address
* Supports IEEE 1588
Peripheral interface
–MIOe Unified Expansion
DisplayPort1
2 PCIe x1
USB 3.0
LPC
HD Audio: Line out
SMBus
Power: +5 Vsb/+12 Vsb, Power On, Reset
–2 Serial-ATA port, up to 6.0 Gb/s (600 MB/s)
–2 USB 3.0 and 2 USB2.0 compliant ports on rear I/O, 2 USB2.0 compliant
ports for internal connection1
–2 RS-232/422/485 (ESD protection: Air gap ±15kV, Contact ±8kV)
–8-bit Programmable General Purpose Input/ Output from iManager
–1 SMBus / I2C channel from iManager
–Watchdog timer: Output System Reset, Programmable counter from 1 ~ 255
minutes/ seconds
–Mini PCIe / mSATA
1 Full-size mSATA/ Mini PCIe (default supports mSATA) (One Mini PCIe
default supports mSATA, can be selected in BIOS)
1 Half-size Mini PCIe with SIM card holder
High Definition Audio:
–Intel® High Definition Audio Interface
–High Definition Audio Codec with Realtek proprietary loss-less content pro-
tection technology
–Support 1 Line-input, 1 Line output, 1 Mic-input
BIOS
–AMI UEFI 128 Mbit
Security:
–TPM2.0*, only support under UEFI mode
1.2.2 OS support
MIO-5272 supports Win 10, Win7, WES7
For further information about OS support of MIO-5272, please Advantech website:
http://support.advantech.com.tw/ or contact the technical support center.
1.2.3 Mechanical Specifications
Dimensions: 146 x 102 mm (5.7 x 4 inches)
Height: Top Side: 16.5 mm, PCB: 2.0mm; Bottom Side: 7.8 mm
Weight: 0.67 kg (reference weight of total package)

5 MIO-5272 User Manual
Chapter 1 General Information
1.2.4 Electrical Specifications
Power Requirement: Single +12V DC ± 10% power input
Power Consumption:
–Max load
i7 6600U: 22.03 W
i5 6300U: 20.87 W
i3 6100U: 20.45 W
Celeron 3955U: 17.81 W
–Idle mode
i7 6600U: 6.46 W
i5 6300U: 5.26 W
i3 6100U: 5.02 W
Celeron 3955U: 4.88 W
Power Consumption Conditions:
–Test software: 3DMark 2006
–Max. load: Measure the maximum current value which system under maxi-
mum load (CPU: Top speed, RAM &Graphic: Full loading)
–Idle mode: Measure the current value when system in windows mode and
without running any program
RTC Battery:
–Typical Voltage: 3.0 V
–Normal discharge capacity: 210 mAh
1.2.5 Environmental
Operating temperature: 0 ~ 60°C (32 ~ 140°F)
Operating Humidity: 40°C @ 95% RH Non-Condensing
Storage Temperature: Storage temperature: -40~85°C
Storage Humidity: Relative humidity: 95% @ 60°C
1It will not be supported in default, please contact to Advantech if this function
is needed.
2Thermal condition need to be considered when setting max frequency.

MIO-5272 User Manual 6
1.3 Block Diagram
1.4 Board layout: dimensions
Figure 1.1 MIO-5272 Mechanical Drawing (Top Side)
1 Supported by request2 USB 2.0
DDR3L SO-DIMM
USB 2.0
2 USB 2.0
USB 2.0
2 USB 3.0
USB 3.0 & 2.0
HD Codec
HD Audio
Super I/O
BIOS
LPC
SPI
UART
PHY :
Intel i219
PCIe x 1
Advantech
iManager
Skylake U
SMBus/I
2
C
SMBus/I2C
Interface
GbE :
Intel i210
Audio
In/Out
48-bit LVDS
connector
DP
Dual Channel
2 SATA Ports
SATA 6Gb/s
Full-szie miniPCIe
PCIe
USB 2.0
SATA
TPM 2.01
CPL
Power On
Reset
2 PCIe x 1
Line Out
USB 3.0 x1 (including USB2.0)
LPC
SMBus
DP
DP
1
eDP
MIOe
GPIO
GPIO
HDMI
Transmitter
RJ45
PCIe x 1
RJ45
2 RS-232/422/485
Transmitter RGB VGA
Full-szie miniPCIe
PCIe
USB 2.0
UIM SIM

7 MIO-5272 User Manual
Chapter 1 General Information
Figure 1.2 MIO-5272 Mechanical Drawing (Bottom Side)
Figure 1.3 MIO-5272 Mechanical Drawing (Coastline)

MIO-5272 User Manual 8
Figure 1.4 MIO-5272 Mechanical Drawing (with Heatsink)
Figure 1.5 MIO-5272 Mechanical Drawing (with Heat Spreader)

Chapter 2
2Installation
This chapter explains the setup
procedures of the MIO-5272 hard-
ware, including instructions on
setting jumpers and connecting
peripherals, switches and indica-
tors. Be sure to read all safety pre-
cautions before you begin the
installation procedure.

MIO-5272 User Manual 10
2.1 Jumpers & Switches
The MIO-5272 has a number of jumpers that allow you to configure your system to
suit your application. The table below lists the functions of the various jumpers.
2.2 Connectors
Onboard connectors link the MIO-5272 to external devices such as hard disk drives,
a keyboard, or floppy drives. The table below lists the function of each of the board's
connectors.
Table 2.1: Jumpers & Switches
J1 Auto Power On Setting
J2 LCD Power
SW2 Clear CMOS
Table 2.2: Connectors
Label Function
CN1 12V Power Input
CN2 DC JACK (Support by request)
CN4 Battery
CN5 DDR3L SO-DIMM_1
CN6 DDR3L SO-DIMM_2
CN8 Power Switch
CN9 Reset
CN10 GPIO
CN11 SATA2
CN12 SATA1
CN13 SATA Power
CN14 Mini PCIE_1
CN15 mSATA or Mini PCIE_2
CN16 SIM
CN19 COM1/2 RS-232/422/485
CN21 Gigabit Ethernet 1 & 2
CN23 Audio
CN24 External USB3.0*2
CN25 External USB2.0*2
CN26 Internal USB
CN27 VGA
CN28 MIOe
CN29 SMBus
CN32 Inverter Power Output
CN33 48 bits LVDS Panel
CN34 HDMI
CN36 System FAN

11 MIO-5272 User Manual
Chapter 2 Installation
2.3 Locating connectors & block diagram
Figure 2.1 MIO-5272 Connector Locations (Top Side)
Figure 2.2 MIO-5272 Connector Locations (Bottom Side)
48-bit LVDS
2 x SATA
2x 2 Power
Input or
DC Jack*
PWR & HDD LED
GbE1 & GbE2
HDMI VGA
2 x USB3.0 & 2.0
2 x DDR3L
SO-DIMM
Power
Switch
Reset
Inverter Power Output
SATA Power
* Support by request
SMBus
J1
System FAN
* Support by request
MIOe
SIM for Mini PCIe 1
Mini PCIe 1
mSATA or
Mini PCIe 2
(Select by BIOS seƫng)
8 –bit GPIO
COM 1 & 2
RS-232/422/485
HD Audio
Line-in, Line-out, Mic-in
2 x USB2.0
J2
SW2