Advantech PCM-9588 User manual

User Manual
PCM-9588
Intel® Celeron® M EBX SBC with
DVI/ TTL/ VGA/ LVDS/ LAN/ 6
COM/ 2 SATA / 6 USB2.0/ 16bit
GPIO

PCM-9588 User Manual ii
Copyright
This document is copyrighted, ©2009. All rights are reserved. The original manufac-
turer reserves the right to make improvements to the products described in this man-
ual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmitted in any
form or by any means without the prior written permission of the original manufac-
turer. Information provided in this manual is intended to be accurate and reliable.
However, the original manufacturer assumes no responsibility for its use, nor for any
infringements upon the rights of third parties that may result from such use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIA Technologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
CHRONTEL is a trademark of Chrontel Inc.
All other product names or trademarks are properties of their respective owners.
For more information about this and other Advantech products, please visit our web-
site at:
http://www.advantech.com/
http://www.advantech.com/ePlatform/
For technical support and service, please visit our support website at:
http://support.advantech.com.tw/support/
Part No. 2006958812 Edition 3
Printed in Taiwan January 2011

iii PCM-9588 User Manual
Product Warranty (2 years)
Warranty Period
ADVANTECH aims to meet the customer's expectations for post-sales service and
support; therefore, in addition to offering 2 years global warranty for ADVANTECH's
standard products, a global extended warranty service is also provided for customers
upon request. ADVANTECH customers are entitled to a complete and prompt repair
service beyond the standard 2 years of warranty.
Standard products manufactured by ADVANTECH are covered by a 2 year global
warranty from the date of shipment. Products covered by extended warranty and
cross-region repair services against defects in design, materials, and workmanship,
are also covered from the date of shipment. All key parts assembled into ADVAN-
TECH system products such as LCD, Touch Screen, Power Supply, peripherals, etc.,
will be also covered by the standard 2 year warranty.
Repairs under Warranty
It is possible to obtain a replacement (Cross-Shipment) during the first 30 days of
purchase (45 days for Channel Partners), if the products were purchased directly
from ADVANTECH and the product is DOA (Dead-on-Arrival).
DOA Cross-Shipment excludes any customized and/or build-to-order products. The
Cross-Shipment agreement signed by customers is required for initiating/releasing
cross shipment with ADVANTECH confirmation and verification. The only conditions
for Cross-Shipment are: a) the return must not be damaged, altered or marked, b) all
parts and accessories must be included as originally shipped; and c) proof of pur-
chase must be included. Any returns that do not meet mentioned requirements
above, or any wrong user settings/configurations will be denied, or subject to addi-
tional handling/service charges as determined by the ADVANTECH Repair Service
Department.
For those products which are not DOA, the return fee to an authorized ADVANTECH
repair facility will be at the customers' expense. The shipping fee for reconstructive
products from ADVANTECH back to customers' sites will be at ADVANTECH's
expense.
Exclusions from Warranty
The product is excluded from warranty if:
The product has been found to be defective after expiry of the warranty period.
Warranty has been voided by removal or alternation of product or part identifica-
tion labels.
The product has been misused, abused, or subjected to unauthorized disas-
sembly/modification; placed in an unsuitable physical or operating environment;
improperly maintained by the customer; or failure caused which ADVANTECH is
not responsible whether by accident or other cause. Such conditions will be
determined by ADVANTECH at its sole unfettered discretion.
The product is damaged beyond repair due to a natural disaster such as a light-
ing strike, flood, earthquake, etc.
Product updates/upgrades and tests upon the request of customers who are
without warranty.

PCM-9588 User Manual iv
Phoenix Operation User Notes
Issue date: OCT 2008
Terms & Conditions
TERMS (Lifetime Factors)
Advantech’s Phoenix Operation is a screening service to test a system’s ability to
operate under a wide range of temperatures.
Naming rules for Advantech’s Phoenix Operation:
1. Z (Advantech Phoenix Gold): A product bearing this indicator (Z) has already
passed Advantech’s -20 ~ 80°C high/low temperature and burn-in test, based
on Advantech’s internal screening process.
2. Z2 (Advantech Phoenix Platinum): A product bearing this indicator (Z2) has
already passed Advantech’s -40 ~ 85°C high/low temperature and burn-in test,
based on Advantech’s internal screening process.
During the burn-in process the test target must operate seamlessly with the test soft-
ware.
Listed below are precautions to be aware of before beginning to use the product:
Higher temperatures accelerate chemical and physical reactions at approximately a
factor of two for every ten degrees centigrade. These faster reactions can quickly
reduce a module's operating lifetime. Wide temperature fluctuations also cause
mechanical fatigue.
CONDITIONS (Warranty Policy)
1. All boards are screened and operable during the screening process.
2. Advantech warrants the functionality of the board to operate within the appropri-
ate temperature range (Z: two years; Z2: one year).
3. High operating temperature will significantly shorten the MTBF (mean time
between failures).
4. In extremely high or low temperatures certain components might exceed the
maker’s temperature specifications. Advantech is not responsible for individual
parts operating at temperatures outside their specifications.

v PCM-9588 User Manual
Declaration of Conformity
FCC Class A
This device complies with the requirements in part 15 of the FCC rules: Operation is
subject to the following two conditions:
1.This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this device in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his/her own
expense. The user is advised that any equipment changes or modifications not
expressly approved by the party responsible for compliance would void the compli-
ance to FCC regulations and therefore, the user's authority to operate the
equipment.
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.

PCM-9588 User Manual vi
Packing List
Before installation, please ensure the following items have been shipped:
1 PCM-9588 SBC
1 Startup manual
1 Utility CD
1 mini jumper pack 9689000002
Ordering information
Model Number Description
PCM-9588T-M0A1E Intel C-M 600M w/TTL/CRT/6 COM/Audio/2SATA/16
GPIO
PCM-9588F-S0A1E Intel C-M 1.0G w/LVDS/DVI/CRT/6 COM/Audio/2SATA/16
GPIO
Optional accessories
Model Number Description
PCM-10586-9588E Wiring kit for PCM-9588 Series
1703100260 USB cable
PCM-110-00A3E 1-slot PCI riser card for 5.25" biscuits
PCM-120-00A3E 2-slot PCI riser card for 5.25" biscuits
PCM-200-00A2E PC/104-Plus to PCI bus module
9681000041 24 bit LCD cable adaptor (for 5 V LCD panel)
9681000040 24 bit LCD cable adaptor (for 3.3V LCD panel)
CF-HDD-ADP CompactFlash 50-pin to IDE 44-pin adapter

vii PCM-9588 User Manual
Contents
Chapter 1 General Introduction ...........................1
1.1 Introduction ............................................................................................... 2
1.2 Product Specifications............................................................................... 2
1.3 Chipset ...................................................................................................... 2
1.3.1 Functional Specification ................................................................ 2
1.3.2 Mechanical Specifications............................................................. 5
1.3.3 Electrical Specifications ................................................................ 5
1.3.4 Environment Specifications........................................................... 7
Chapter 2 H/W Installation....................................9
2.1 Jumpers .................................................................................................. 10
2.1.1 Jumper list................................................................................... 10
2.1.2 Jumper Settings: ......................................................................... 10
Table 2.1: JP1: VIO Select for PCI and ISA slot........................ 10
Table 2.2: JP4: CMOS Clear ..................................................... 10
Table 2.3: JP6: RS422 / RS485 Select for COM5 and COM6 .. 10
Table 2.4: JP8: LCD Panel Power Select.................................. 11
Table 2.5: JP9: Backlight control select..................................... 11
2.1.3 Jumper Description ..................................................................... 11
2.2 Connectors.............................................................................................. 12
2.2.1 Connector List............................................................................. 12
Table 2.6: Connector List .......................................................... 12
2.2.2 Connector Settings ..................................................................... 12
2.3 Mechanical .............................................................................................. 16
2.3.1 Jumper and Connector Locations ............................................... 16
Figure 2.1 Jumper and Connector Layout (Component Side)... 16
Figure 2.2 Jumper and Connector Layout (Solder Side) ........... 16
2.3.2 Board Dimensions....................................................................... 17
Figure 2.3 Board Dimension Layout (Component Side) ............ 17
Figure 2.4 Board Dimension Layout (Solder Side) .................... 17
Chapter 3 BIOS Operation..................................19
3.1 BIOS Introduction.................................................................................... 20
3.2 BIOS Setup ............................................................................................. 20
3.2.1 Main Menu .................................................................................. 21
3.2.2 Standard CMOS Features .......................................................... 22
3.2.3 Advanced BIOS Features ........................................................... 23
3.2.4 Advanced Chipset Features........................................................ 25
3.2.5 Integrated Peripherals................................................................. 27
3.2.6 Power Management Setup ......................................................... 29
3.2.7 PnP/PCI Configurations .............................................................. 31
3.2.8 PC Health Status ........................................................................ 32
3.2.9 Frequency/Voltage Control ......................................................... 33
3.2.10 Load Optimized Defaults............................................................. 33
3.2.11 Set Password.............................................................................. 34
3.2.12 Save & Exit Setup ....................................................................... 35
3.2.13 Quit Without Saving .................................................................... 36

PCM-9588 User Manual viii
Chapter 4 S/W Introduction & Installation........ 37
4.1 S/W Introduction ..................................................................................... 38
4.2 Driver Installation .................................................................................... 38
4.2.1 Windows XP Professional........................................................... 38
4.2.2 Other OS..................................................................................... 38
4.3 SUSI Application Library ......................................................................... 39
4.3.1 SUSI Introduction........................................................................ 39
4.3.2 SUSI Functions........................................................................... 39
4.3.3 SUSI Installation ......................................................................... 40
4.3.4 SUSI Sample Programs.............................................................. 42
Chapter 5 Extension I/O Installation ................. 51
5.1 PC-104 plus ............................................................................................ 52
5.2 PCI .......................................................................................................... 52
Appendix A Pin Assignments............................... 53
A.1 CN2: CD in Connector ............................................................................ 54
Table A.1: CN2: CD In connector .............................................. 54
A.2 CN4: Audio Connector ............................................................................ 54
Table A.2: CN4: Audio connector .............................................. 54
A.3 CN5: Power Connector ........................................................................... 55
Table A.3: CN5: Power connector ............................................. 55
A.4 CN6: Inverter Connector ......................................................................... 56
Table A.4: CN6: Inverter connector ........................................... 56
A.5 CN8: VGA Connector.............................................................................. 56
Table A.5: CN8: VGA connector................................................ 56
A.6 CN9: LVDS Connector............................................................................ 57
Table A.6: CN9: LVDS connector .............................................. 57
A.7 CN10: TTL Connector (High Bits) ........................................................... 58
Table A.7: CN10: TTL connector (High Bits) ............................. 58
A.8 CN11: TTL Connector (Low Bits)............................................................ 59
Table A.8: CN11: TTL connector (Low Bits) .............................. 59
A.9 CN12: LAN Connector ............................................................................ 60
Table A.9: CN12: LAN connector .............................................. 60
A.10 CN13: HDD LED and POWER LED ....................................................... 61
Table A.10:CN13: HDD LED and POWER LED......................... 61
A.11 CN15: LPT / FDD Connector .................................................................. 61
Table A.11:CN15: LPT / FDD connector .................................... 61
A.12 CN16: IDE Connector ............................................................................. 62
Table A.12:CN16: IDE connector ............................................... 62
A.13 CN17: PC104-plus Connector ................................................................ 63
Table A.13:CN17: PC-104/+ Connector ..................................... 63
A.14 CN19: COM1~4 Connector..................................................................... 64
Table A.14:CN19: COM1~4 Connector ...................................... 64
A.15 CN20: USB1/2 Connector....................................................................... 65
Table A.15:CN20: USB1/2 Connector ........................................ 65
A.16 CN22: Reset Button Connector .............................................................. 65
Table A.16:CN22: Reset Button Connector................................ 65
A.17 CN23: Power Button Connector.............................................................. 66
Table A.17:CN23: Power Button Connector ............................... 66
A.18 CN24: SIR Connector ............................................................................. 66

ix PCM-9588 User Manual
Table A.18:CN24: SIR Connector............................................... 66
A.19 CN25: PS2 Keyboard/Mouse Connector ................................................ 67
Table A.19:CN25: PS2 Keyboard/Mouse connector................... 67
A.20 CN26: CF TYPEII Connector .................................................................. 67
Table A.20:CN26: CF TYPEII connector .................................... 67
A.21 CN27: -V5 and -V12 Connector .............................................................. 68
Table A.21:CN27: -V5 and -V12 connector ................................ 68
A.22 CN28: USB3/4 Connector ....................................................................... 69
Table A.22:CN28: USB3/4 Connector ........................................ 69
A.23 CN29: DDR2 SODIMM Socket ............................................................... 69
Table A.23:CN29: DDR2 SODIMM Socket................................. 69
A.24 CN30: DVI Connector ............................................................................. 70
Table A.24:CN30: DVI Connector............................................... 70
A.25 CN31: SATA 1 Connector ....................................................................... 71
Table A.25:CN31: SATA 1 connector ......................................... 71
A.26 CN32: SATA 2 Connector ....................................................................... 71
Table A.26:CN32: SATA 2 connector ......................................... 71
A.27 CN33: Battery Connector ........................................................................ 72
Table A.27:CN33: Battery Connector ......................................... 72
A.28 CN34: LAN LED Connector .................................................................... 72
Table A.28:CN34: LAN LED Connector...................................... 72
A.29 CN36: GPIO1 Connector ........................................................................ 73
Table A.29:CN36: GPIO1 Connector.......................................... 73
A.30 CN37: GPIO2 Connector ........................................................................ 73
Table A.30:CN37: GPIO2 Connector.......................................... 73
A.31 CN38: USB5/6 Connector ....................................................................... 74
Table A.31:CN38: USB5/6 Connector ........................................ 74
A.32 CN41: COM 5/6 (RS-422 / 485) Connector ............................................ 74
Table A.32:CN41: COM 5/6 / 422 / 485 connector ..................... 74
Appendix B Optional Extras for the PCM-9588....75
B.1 PCM-10586-9588E Cable kit for PCM-9588 ........................................... 76
Table B.1: PCM-10586-9588E Cable kit for PCM-9588 ............ 76
Appendix C Programmable GPIO & Watchdog
Timer77
C.1 Watchdog Timer...................................................................................... 78
C.2 GPIO Sample Code ................................................................................ 79
Appendix D Electrical Specifications ...................91
D.1 Input Power ............................................................................................. 92
D.1.1 Power Supply Selection .............................................................. 92
D.1.2 Power Requirement of Power Supply ......................................... 92
D.1.3 Rising Time ................................................................................. 92
D.2 I/O Port.................................................................................................... 93
Table D.1: I/O Port ..................................................................... 93
Appendix E System Assignments ........................95
E.1 System I/O Ports ..................................................................................... 96

PCM-9588 User Manual x
Table E.1: System I/O Ports ...................................................... 96
E.2 1st MB Memory Map............................................................................... 97
Table E.2: Table C.2: 1st MB memory map............................... 97
E.3 DMA Channel Assignments .................................................................... 97
Table E.3: DMA channel assignments....................................... 97
E.4 Interrupt Assignments ............................................................................. 97
Table E.4: Interrupt assignments............................................... 97

Chapter 1
1General Introduction
This chapter gives background
information on PCM-9588.
Sections include:
Introduction
Specifications

PCM-9588 User Manual 2
1.1 Introduction
Fanless design, Intel® Celeron® M Processor on board type
EBX form factor standard, supports PC/104-Plus
One SODIMM up to 2GB DDR2 400 MHz (910GMLE)
Display Combination: CRT+ LVDS / DVI+ LVDS/ DVI+ CRT/ CRT+ TTL/
DVI+TTL
10/100 Mbps Ethernet support UL60601 Design, GIGA LAN optional
Supports Wake-on-LAN, Wake-on-Modem
Supports LCD backlight turn-off function
Supports ATX/ AT power modes
AC97 Audio on board
6 COM (Supports Auto flow control), 2 SATA, 6 USB 2.0, 16-bit GPIO
1.2 Product Specifications
General
CPU: Intel® Celeron® M 600M/1.0G Processor on board
L2 Cache: Celeron® M 600M 512K L2/ Celeron® M 1.0G 0 L2
System Chipset: Intel 910GMLE + ICH6M
BIOS: Award 4Mb LPC BIOS
System Memory: One SODIMM up to 2GB DDR2 400 MHz
Power Management: APM1.2, ACPI support
Watchdog Timer: 255-level interval timer, setup by software, Super I/O inte-
grated, SMSC Controller
Expansion Interface: Supports PC-104 Plus
Battery: Lithium 3 V / 196 mAH
1.3 Chipset
1.3.1 Functional Specification
1.3.1.1 Processor
1.3.1.2 Chipset (910GMLE)
Note! For Electrical Specification information, please refer to Appendix D.
Processor
Intel Celeron M processor 600MHz (512K L2) / 1.0GHz(0L2)
CPU Process: 90nm.
400 MHz FSB Support
North Bridge
Controller Hub Intel® 910GMLE chipset
FSB 400MHz for 910GMLE

3 PCM-9588 User Manual
Chapter 1 General Introduction
Display
VGA port
18/36-bit TTL
DVI (36 bit)
LVDS (48 bit)
Features
Intel GMA 900,(166 MHz/160 MHz @1.05v)
2D Display core frequency support from 133 MHz & 190/200 MHz @ Vcc =
1.05 / 1.5 V
depending on Host/Memory configuration
3D Render core frequency support from 133 MHz & 160/166 MHz @ Vcc =
1.05 / 1.5 V
depending on Host/Memory configuration
Two SDVO ports multiplexed with PCI Express graphic interface
Dual Channel LVDS interface support 36 bits
CRT monitor resolutions supported:
Supports up to QXGA(2048x1536)
LVDS panel resolution supported:
Supports up to SXGA (1400x1050)
Dual independent display options with digital display
VGA
Analog CRT DAC interface support
Supports max DAC frequency up to 400 MHz
24-bit RAMDAC support
DDC2B compliant
Digital/Analog Converter for CRT: QXGA (2048x1536)
DVI
able to drive a DFP display at a pixel rate of up to 165MHz
supporting UXGA (1600x1200) resolution displays.
Digital Visual Interface (DVI) Transmitter up to 165M pixels/second
supports from CH7307
LVDS
LVDS: Up to SXGA (1400x1050) --- 910GMLE Integrated dual channel
LVDS interface supported on Display Pipe B only
Supports 25 to 112 MHz single/dual channel LVDS interface:
Single channel LVDS interface support: 1 x 18 bpp
Dual channels LVDS interface support: 2 x 18 bpp
Maximum Wide panel size supported up to WUXGA
Ambient Light Sense support for automatic backlight brightness adjustments
Intel Display Power Savings Technology 2.0 support
Supports Single pipe simultaneous display with the CRT DAC and the LVDS
ports under the following conditions:
Timings must match for both display
Panel Fitting. Panning, and Center mode supported Spatial Dithering sup-
port to emulate up to 16 million colors for 18bpp TFT panels.
Spread spectrum clocking (SSC) supported Supports down and center SSC
via an SSC clock from an external SSC clock chip.
Supports down spread of - 2.5% or center spread of ± -1.25% in reference
30-50 kHz modulation rate SSC must be disabled for LVDS port and CRT
DAC single pipe simultaneous display mode.
Panel Power Sequencing support
Power down state can be either zero volt or high impedance
Integrated PWM interface for LCD Backlight Inverter Control
TTL Supports up to 1600x1200x32 bpp at 60 Hz 18,36-bit, TTL signal supports
via NS_DS90C3202
Internal
Graphics Fea-
tures
Intel GMA 900,
910GMLE:
2D Display core frequency support from 133 MHz & 190/200 MHz @ Vcc =
1.05 / 1.5 V depending on Host/Memory configuration
3D Render core frequency support from 133 MHz & 160/166 MHz @ Vcc =
1.05 / 1.5 V depending on Host/Memory configuration

PCM-9588 User Manual 4
1.3.1.3 Chipset (ICH6M)
I/O:
1.3.1.4 Other (chipset)
LPT 1
RS-232 4
RS-232/422/485 2 (Default RS-422/485, RS-232 by optional request)
K/B 1
Mouse 1
USB 6 x USB2.0
Audio AC97, Line-in, Line-out, Mic-in, speaker out (R/L)
GPIO 16-bit general purpose input/output
IRDA 115 kbps (optional by request) shared from COM2
South Bridge
Controller Hub Intel ICH6M
PCI Compliant Supports 33MHz PCI 2.2 specification
Supports for 64-bit addressing on PCI using DAC protocol
PCI Bus
PCI masters
PCI to ISA bridge (ITE8888G)
10/100 LAN(RTL8100CL-LF)
Other Feature
6 USB 2.0 ports, 480MB/s
2 Serial ATA(150MB/s)
Power Management
FWH interface to Flash BIOS
6 COM ports, 4 x RS-232; 2 x RS-232/422/485 Signal (Support
Auto flow control).
COM1, 2, 3, 4: RS-232
COM5, 6: RS-422/485 (Default RS-422/485, RS-232 by optional
request)
LAN
Chipset LAN 1: Realtek RTL8100CL-LF for 10/100 Giga LAN(RTL8110SCL-LF)
optional (preserve circuit) Preserve UL60601 design only on LAN1
IEEE Compliant Fully compliant with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab
LAN LED LED1: Off for 10M LAN, Green or 100M LAN
LED2: On for Link, flash for active,
Disable LAN
through BIOS Yes
Wake on LAN Yes (S1 only)
Boot from LAN Yes (S5 only)
LED connector pin header - with TX/RX LED signal
Audio
Chipset AC97 Audio
Codec ALC203
Rear panel output Line-In, Line-out, Mic-In
Amplifier Yes. (2.2W)
Hardware Monitor
Chipset LPC I/O for onboard alarm

5 PCM-9588 User Manual
Chapter 1 General Introduction
1.3.2 Mechanical Specifications
1.3.2.1 Dimensions (mm)
203mm (L) x 146mm (W) (8" x 5.75")
1.3.2.2 Height on Top (mm)
15.4 mm (PCI slot)
1.3.2.3 Height on Bottom (mm)
8.5 mm (CF socket)
1.3.2.4 Heatsink Dimensions (mm)
50 x 50 x 10 mm (Heatsink)
1.3.2.5 Weight (g) with Cooler
480 g
1.3.3 Electrical Specifications
1.3.3.1 Power Supply Voltage
SMSC3106
Fan
Programmable automatic fan monitor based on temperature. System
FAN Power Connector x 1 It should be added near by the CPU socket
Connector type: 2.0mm Wafer box 3x1 Default is +12V Fan Pin1: GND
Pin2: +12V Pin3: Fan speed signal input
Temperature monitors system/CPU temperature and voltage status
Voltage 2.5V,Vcore, 12V, 5V, 3.3V,
Super I/O
Chipset SMSC3106
Fan speed monitor N/A
Temperature Yes
Power Type AT/ATX
Power Supply
Voltage
ATX: 5 VSTB, +5 V ±5%, +12 V ±5%, external 12 V optional for LCD Inverter,
PCI & PCI-104 Plus
AT: 5 V only to boot up, external 12 V optional for LCD Inverter, PCI & PCI-
104 Plus
Power
Management
APM, ACPI
Battery Lithium 3 V/196 mAH

PCM-9588 User Manual 6
1.3.3.2 Power Supply Current
PCM-9588 AT Power Consumption
Test Condition:
OS - WindowsXP SP2
Add-in Card - None
CF Card - Transcent 1G
MiniPCI Card - None
HDD - 160GB SATA *1
BIOS - 9588x049
KeyBoard/Mouse - USB or PS/2 Interface
Display - CRT
PCM-9588 ATX Power Consumption
Test Condition:
OS - WindowsXP SP2
Add-in Card - None
CF Card - Transcent 1G
MiniPCI Card - None
HDD - 160GB SATA *1
BIOS - 9588x049
KeyBoard/Mouse - USB or PS/2 Interface
Display - CRT
CPU type Status +V3.3 +V5SB +V5 +V12 +V3.3 +V5SB +V5 +V12 +V3.3 +V5SB +V5 +V12
DDRII 512MB/533MHz DDRII 1GB/533MHz DDRII 2GB/667MHz
Intel Cele-
ron M
600MHz
DOS Idle N/A N/A 2.5A 0.02A N/A N/A 2.88A 0.03A N/A N/A 2.55A 0.01A
S3 N/A N/A 1.78A 0.01A N/A N/A 1.84A 0.01A N/A N/A 1.86A 0.03A
Win Idle N/A N/A 2.79A 0.01A N/A N/A 2.99A 0.02A N/A N/A 2.9A 0.03A
Win HCT11.2 N/A N/A 3.28A 0.02A N/A N/A 3.56A 0.02A N/A N/A 3.21A 0.02A
CPU type Status +V3.3 +V5SB +V5 +V12 +V3.3 +V5SB +V5 +V12 +V3.3 +V5SB +V5 +V12
DDRII 512MB/533MHz DDRII 1GB/533MHz DDRII 2GB/667MHz
Intel Cele-
ron M 1
GHz
DOS Idle N/A N/A 3.05A 0.01A N/A N/A 3.49A 0.01A N/A N/A 3.14A 0.01A
S3 N/A N/A 2.26A 0.01A N/A N/A 2.33A 0.01A N/A N/A 2.28A 0.02A
Win Idle N/A N/A 3.43A 0.01A N/A N/A 3.58A 0.01A N/A N/A 3.62A 0.01A
Win HCT11.2 N/A N/A 4.01A 0.01A N/A N/A 4.25A 0.01A N/A N/A 4.15A 0.01A
CPU type Status +V3.3 +V5SB +V5 +V12 +V3.3 +V5SB +V5 +V12 +V3.3 +V5SB +V5 +V12
DDRII 512MB/533MHz DDRII 1GB/533MHz DDRII 2GB/667MHz
Intel Cele-
ron M
600MHz
DOS Idle N/A N/A 2.04A 0.02A N/A N/A 2.52A 0.02A N/A N/A 2.5A 0.01A
S3 N/A N/A 1.76A 0.02A N/A N/A 1.77A 0.01A N/A N/A 1.89A 0.02A
Win Idle N/A N/A 2.42A 0.02A N/A N/A 2.45A 0.01A N/A N/A 2.52A 0.02A
Win HCT11.2 N/A N/A 3.23A 0.02A N/A N/A 3.48A 0.02A N/A N/A 3.4A 0.01A
CPU type Status +V3.3 +V5SB +V5 +V12 +V3.3 +V5SB +V5 +V12 +V3.3 +V5SB +V5 +V12
DDRII 512MB/533MHz DDRII 1GB/533MHz DDRII 2GB/667MHz
Intel Cele-
ron M 1
GHz
DOS Idle N/A N/A 3.05A 0.01A N/A N/A 3.49A 0.01A N/A N/A 3.14A 0.01A
S3 N/A N/A 2.26A 0.01A N/A N/A 2.33A 0.01A N/A N/A 2.28A 0.02A
Win Idle N/A N/A 3.43A 0.01A N/A N/A 3.58A 0.01A N/A N/A 3.62A 0.01A
Win HCT11.2 N/A N/A 4.01A 0.01A N/A N/A 4.25A 0.01A N/A N/A 4.15A 0.01A

7 PCM-9588 User Manual
Chapter 1 General Introduction
1.3.3.3 RTC Battery
Typical Voltage: 3.0V
Normal discharge capacity: 196mAh
1.3.4 Environment Specifications
1.3.4.1 Operating Temperature
0 ~ 60° C (32 ~ 140° F)
1.3.4.2 Operating Humidity
0% ~ 90% Relative Humidity, non-condensing
1.3.4.3 Storage Temperature
Standard products (0 ~ 60° C)
Storage temperature: -20 ~ 70° C
1.3.4.4 Storage Relative Humidity
Standard products (0 ~ 60° C)
Relative humidity: 95% @ 60° C
Phoenix products (-20 ~ 80° C)
Relative humidity: 95% @ 60° C
Platinum Phoenix products (-40 ~ 85° C)
Relative humidity: 95% @ 60° C

PCM-9588 User Manual 8

Chapter 2
2H/W Installation
This chapter explains the setup
procedures of the PCM-9588 hard-
ware, including instructions on
setting jumpers and connecting
peripherals, switches, indicators
and mechanical drawings.

PCM-9588 User Manual 10
2.1 Jumpers
2.1.1 Jumper list
JP1 VIO Select for PCI and ISA Slot
JP4 CMOS Clear
JP6 RS422/RS485 Select for COM5 and COM6
JP8 LCD Panel Power Select
JP9 Backlight Control Select
2.1.2 Jumper Settings:
Table 2.1: JP1: VIO Select for PCI and ISA slot
Part Number 1653003100
Footprint PH_3x1V_2.54mm
Description PIN HEADER 3*1P 180D(M) 2.54mm DIP WO/Pb
Setting Function
(1-2) +V5
(2-3) +V3.3
Table 2.2: JP4: CMOS Clear
Part Number 1653003101
Footprint JH3X1V-2M
Description PIN HEADER 3*1P 180D(M) 2.0mm DIP SQUARE W/O Pb
Setting Function
(1-2) Normal
(2-3) Clear
Table 2.3: JP6: RS422 / RS485 Select for COM5 and COM6
Part Number 1653004201
Footprint JH4X2V-2M
Description PIN HEADER 4*2P 180D(M) 2.0mm DIP WO/Pb
Setting Function
(1-2) COM5= RS485
(3-4) COM5= RS422
(5-6) COM6= RS485
(7-8) COM6= RS422