Advantech PCM-9590 User manual

User Manual
PCM-9590

PCM-9590 User Manual ii
Copyright
This document is copyrighted, © 2008. All rights are reserved. The original manufac-
turer reserves the right to make improvements to the products described in this man-
ual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmitted in any
form or by any means without the prior written permission of the original manufac-
turer. Information provided in this manual is intended to be accurate and reliable.
However, the original manufacturer assumes no responsibility for its use, nor for any
infringements upon the rights of third parties that may result from such use.
Trademarks
Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIA Technologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
CHRONTEL is a trademark of Chrontel Inc.
All other product names or trademarks are properties of their respective owners.
Part No. 2006959011 Edition 2
Printed in China Sep. 2008

iii PCM-9590 User Manual
Product Warranty (2 years)
Warranty Period
ADVANTECH aims to meet the customer’s expectations for post-sales service and
support; therefore, in addition to offering 2 years global warranty for ADVANTECH’s
standard products, a global extended warranty service is also provided for customers
upon request. ADVANTECH customers are entitled to a complete and prompt repair
service beyond the standard 2 years of warranty.
Standard products manufactured by ADVANTECH are covered by a 2 year global
warranty from the date of shipment. Products covered by extended warranty and
cross-region repair services against defects in design, materials, and workmanship,
are also covered from the date of shipment. All key parts assembled into ADVAN-
TECH system products such as LCD, Touch Screen, Power Supply, and peripherals
etc, will be also covered by the standard 2 year warranty.
Repairs under Warranty
It is possible to obtain a replacement (Cross-Shipment) during the first 30 days of
purchase (45 days for Channel Partners), if the products were purchased directly
from ADVANTECH and the product is DOA (Dead-on-Arrival).
DOA Cross-Shipment excludes any customized and/or build-to-order products. The
Cross-Shipment agreement signed by customers is required for initiating/releasing
cross shipment with ADVANTECH confirmation and verification. The only conditions
for Cross-Shipment are: a) the return must not be damaged, altered or marked, b) all
parts and accessories must be included as originally shipped; and c) proof of pur-
chase must be included. Any returns that do not meet mentioned requirements
above, or any wrong user settings/configurations will be denied, or subject to addi-
tional handling/service charges as determined by the ADVANTECH Repair Service
Department.
For those products which are not DOA, the return fee to an authorized ADVANTECH
repair facility will be at the customers’ expense. The shipping fee for reconstructive
products from ADVANTECH back to customers’ sites will be at ADVANTECH’s
expense.
Exclusions from Warranty
The product is excluded from warranty if:
The product has been found to be defective after expiry of the warranty period.
Warranty has been voided by removal or alternation of product or part identifica-
tion labels.
The product has been misused, abused, or subjected to unauthorized disas-
sembly/modification; placed in an unsuitable physical or operating environment;
improperly maintained by the customer; or failure caused which ADVANTECH is
not responsible whether by accident or other cause. Such conditions will be
determined by ADVANTECH at its sole unfettered discretion.
The product is damaged beyond repair due to a natural disaster such as a light-
ing strike, flood, earthquake, etc.
Product updates/upgrades and tests upon the request of customers who are
without warranty.

PCM-9590 User Manual iv
FCC
This device complies with the requirements in part 15 of the FCC rules: Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this device in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his/her own
expense. The user is advised that any equipment changes or modifications not
expressly approved by the party responsible for compliance would void the compli-
ance to FCC regulations and therefore, the user’s authority to operate the
equipment.
Warnings, Cautions and Notes
Warning! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer’s
instructions.

v PCM-9590 User Manual
Technical Support and Assistance
For more information about this and other Advantech products, please visit our web-
site at:
http://www.advantech.com/
http://www.advantech.com/ePlatform/
For technical support and service, please visit our support website at:
http://support.advantech.com.tw/support/
Additional Information and Assistance
1. Visit the Advantech web site at http://www.advantech.com/ where you can find
the latest product information.
2. Contact your distributor, sales representative, or Advantech’s customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
 Product name and serial number
 Description of your peripheral attachments
 Description of your software (operating system, version, application soft-
ware, etc.)
 A complete description of the problem
 The exact wording of any error messages
Packing List
Before installation, please ensure the following items have been shipped:
Item Part Number
1 PCM-9590 SBC
1 Startup manual
1 Utility CD
1 ATX power cable (p/n: 1700000265)
1 mini jumper pack (p/n: 9689000002)
1 Cooler 50*50*23 mm 12 V 8000r (PCM-9590FG-00A2E only)

PCM-9590 User Manual vi
Ordering Information
Model Number Description
PCM-9590FG-00A2E
SKT w/ GigaLAN/ 8xUSB2.0/ PCI-E x 16/ Single LVDS
PCM-9590FG-S2A2E
Dual Core 1.2GHz 2M L2 w/GigaLAN/8xUSB2.0/ PCI-E x 16/ LVDS
PCM-9590FG-S6A2E
Dual Core 1.66GHz 2M L2 w/GigaLAN/8xUSB2.0/ PCI-E x 16/ LVDS
Optional Accessories
Model Number Description
1700006200 AT Power Cable 6*2P to 10*2P 100mm PCM-9590
PCM-10586-9590E Wiring kit for PCM-9590 Series
MIO-3120-00A1E Mini PCI interface to Wireless 802.11 b/g communication module
MIO-3121-00A1E Mini PCI to 4 COM Module
MIO-3130-00A1E Mini PCI Interface to Dual LAN Communication Module
MIO-3131-00A1E Mini PCI Interface to Single Giga LAN Communication Module
MIO-3140-00A1E Mini PCI interface to SATA storage module
MIO-3150-00A1E Mini PCI interface to video capture module

vii PCM-9590 User Manual
Contents
Chapter 1 General Introduction ...........................1
1.1 Introduction ...............................................................................................2
1.2 Product Specifications...............................................................................2
1.2.1 General.........................................................................................2
1.2.2 I/O.................................................................................................2
1.2.3 Ethernet ........................................................................................2
1.2.4 Display..........................................................................................3
1.3 Chipset......................................................................................................3
1.3.1 Functional Spec............................................................................3
1.3.2 Mechanical Spec...........................................................................6
1.3.3 Electrical Spec..............................................................................6
1.3.4 Environmental Spec......................................................................8
Chapter 2 H/W Installation....................................9
2.1 Jumpers ..................................................................................................10
2.1.1 Jumper list...................................................................................10
2.1.2 Jumper Settings..........................................................................10
Table 2.1: J1..............................................................................10
Table 2.2: J2..............................................................................10
Table 2.3: J3..............................................................................10
Table 2.4: J4..............................................................................11
Table 2.5: J5..............................................................................11
Table 2.6: J6..............................................................................11
2.1.3 Jumper description......................................................................12
2.2 Connectors..............................................................................................13
2.2.1 Connector list..............................................................................13
Table 2.7: Connector List ..........................................................13
2.2.2 Connector Settings .....................................................................14
2.3 Mechanical..............................................................................................17
2.3.1 Jumper and Connector Location.................................................17
Figure 2.1 Jumper and Connector Layout (Component Side)...17
Figure 2.2 Jumper and Connector Layout (Solder Side)...........17
2.3.2 Board Dimension ........................................................................18
Figure 2.3 Board Dimension Layout (Component Side)............18
Figure 2.4 Board Dimension Layout (Solder Side)....................18
Chapter 3 BIOS Operation..................................19
3.1 BIOS Introduction....................................................................................20
3.2 BIOS Setup .............................................................................................20
Table 3.1: CONTROL KEYS .....................................................20
3.2.1 Main Menu..................................................................................21
3.2.2 Standard CMOS Features ..........................................................22
3.2.3 Advanced BIOS Features...........................................................24
3.2.4 Advanced Chipset Features........................................................26
3.2.5 Integrated Peripherals.................................................................27
3.2.6 Power Management Setup .........................................................28
3.2.7 PnP/PCI Configurations..............................................................30
3.2.8 PC Health Status ........................................................................31
3.2.9 Frequency/voltage Control..........................................................32
3.2.10 Load Optimized Defaults.............................................................33
3.2.11 Set Password..............................................................................33

PCM-9590 User Manual viii
3.2.12 Save & Exit Setup....................................................................... 35
3.2.13 Quit Without Saving.................................................................... 35
Chapter 4 S/W Installation................................. 37
4.1 S/W Introduction ..................................................................................... 38
4.2 Driver Installation .................................................................................... 38
4.2.1 Windows XP professional........................................................... 38
4.2.2 Other OS..................................................................................... 38
4.3 SUSI Application Library......................................................................... 38
4.3.1 SUSI Introduction........................................................................ 38
4.3.2 SUSI Functions........................................................................... 39
4.3.3 SUSI Installation......................................................................... 39
Table 4.1: Windows XP............................................................. 40
4.3.4 SUSI Sample Programs.............................................................. 41
Chapter 5 Extension I/O Installation................. 49
5.1 PCI_E...................................................................................................... 50
5.2 MIO USB................................................................................................. 50
5.3 PC/104.................................................................................................... 51
Appendix A Pin Assignments...............................53
A.1 Gigabit LAN led connector (CN1) ........................................................... 54
A.2 LVDS1 connector (CN2)(CN32).............................................................. 54
A.3 LAN1 connector (CN3)............................................................................ 55
A.4 SATA connector 1 (CN4)........................................................................ 55
A.5 SATA connector 0 (CN5)........................................................................ 55
A.6 DIO1 connector (CN6) ............................................................................ 56
A.7 DIO2 connector (CN7) ............................................................................ 56
A.8 LAN2 connector (CN8)............................................................................ 56
A.9 USB port 4/5 (CN9)................................................................................. 57
A.10 Printer port connector (CN10)................................................................. 57
A.11 USB port 2/3 (CN11)............................................................................... 58
A.12 Floppy connector (CN12)........................................................................ 58
A.13 Primary HDD connector (CN13) ............................................................. 59
A.14 USB port 0/1 (CN14)............................................................................... 59
A.15 RS422 / RS485 connector (CN15).......................................................... 60
A.16 SMBUS connector (CN17)...................................................................... 60
A.17 VGA connector (CN18)........................................................................... 60
A.18 COM port 1/2/3/4 connector (CN19)....................................................... 61
A.19 Front panel connector (CN20) ................................................................ 61
A.20 Power input connector (CN21)................................................................ 62
A.21 TV-out connector (CN22)........................................................................ 62
A.22 LVDS1 backlight connector (CN23)(CN33) ............................................ 62
A.23 +12 V power connector (CN24) .............................................................. 63
A.24 Audio output connector (CN26) .............................................................. 63
A.25 CD_IN connector (CN27)........................................................................ 63
A.26 KB/Mouse connector (CN28).................................................................. 64
A.27 Extension SMBUS connector (CN29)..................................................... 64
A.28 LVDS2 connector (CN32) ....................................................................... 65
A.29 LVDS2 backlight connector (CN33)........................................................ 65
A.30 FAN1: CPU FAN..................................................................................... 65
A.31 FAN2: System FAN................................................................................. 66

ix PCM-9590 User Manual
Appendix B Optional Extras..................................67
B.1 Optional Extras........................................................................................68
Table B.1: PCM-10586-9590E Cable kit for PCM-9590 ............68
B.2 Ordering Information...............................................................................68

PCM-9590 User Manual x

Chapter 1
1General Introduction
This chapter gives background
information on the PCM-9590.
Sections include:
Introduction
Specifications

PCM-9590 User Manual 2
1.1 Introduction
The PCM-9590 is an EBX SBC (Single Board Computer) with Intel Core Duo CPU on
board or socket type up to Core 2 Duo grade.
The PCM-9590, in conjunction with Intel 945 GME and ICH7M chipsets, supports
processors clocked up to 2.2 GHz, six USB 2.0 compatible ports, two Ethernet up to
10/100/1000 Mbps, Support 2 channel 36-bit LVDS which can support dual indepen-
dent display (36-bit LVDS + VGA or 36-bit LVDS+ 48-bit LVDS), can accommodate
up to 2GB of DDR2 SODIMM RAM memory (support FSB 533/667 MHz), and two
SATA and four COM ports.
PCM-9590 also with expansion ability on one PCI-Express x16, PCI-104, Mini PCI.
1.2 Product Specifications
1.2.1 General
CPU: Embedded Intel Core 2 Duo/ Core Duo/ Core Solo/Celeron M Processor
supported:
–Core Duo 1.66 GHz PCM-9590FG-S6A2E
–Core Duo 1.2 GHz PCM-9590FG-S2A2E
–uFCPGA2 (478 pin) PCM-9590FG-00A2E
2nd Cache Memory: Depends on CPU from 512 KB to 4 MB
System Chipset: Intel 945GME/ICH7M Chipset
BIOS: AWARD® 4 Mbit Flash BIOS
System Memory: 2 x 200-pin SODIMM sockets, Double Data Rate (DDR2) 128
MB up to 4 GB, accept 128/256/512/1024 MB DDR2 up to 533/667 DRAM
Power Management: APM1.2, ACPI support
Watchdog Timer: 255-level interval timer, setup by software, Super I/O inte-
grated, SMSC Controller
Expansion Interface: Supports PCI-104, Mini PCI interface, one PCI-E X 16
Slot
Battery: Lithium 3 V/196 mA
1.2.2 I/O
I/O Interface: 1 x EIDE (UDMA 100), 2 x SATA 300, 1 x K/B, 1 x Mouse, 3 x
RS232, 1 x RS232/422/485, 1 x LPT and 2 x EIDE device
USB: 6 x USB 2.0 compliant Ports
Audio: HD Audio codec ALC883, support 7.1 channel
Supports CD-input, Line-in, Line-out, Microphone
IrDA: N/A
GPIO: 16-bit general purpose 16 input/16 output
1.2.3 Ethernet
Chipset: 2 x Intel 82573L
Speed: 10/100/1000 Mbps
Interface: 2 x RJ45 by cable
Standard: IEEE 802.3u 100Base-T & IEEE 802.3ab 1000Base-T

3 PCM-9590 User Manual
Chapter 1 General Introduction
1.2.4 Display
Chipset: Intel 945GME chip integrated (Inter Gen 3.5 integrated graphic
engine)
Memory Size: 32-bit interface to address up to 32 MB of memory
Resolution: CRT Display mode: pixel resolution up to QXGA (2048 x 1536)
LCD Display mode: Dual channel LVDS panel supports up to UXGA panel res-
olution with frequency range from 25 MHz to 112 MHz
LVDS: 2 Channel LVDS 1 (36-bit) LVDS2 (48-bit) optional by request
Dual Ind. Display: CRT + LVDS; CRT + TV-Out; LVDS + TV-Out or 36-bit
LVDS1+ 48-bit LVDS2 under Windows system
1.3 Chipset
1.3.1 Functional Spec.
1.3.1.1 Processor
Yonah processor and Meron processor support
533/667 MHz FSB Support
32-bit host bus addressing
FCBGA package (T2500, L2400, U2500)
1.3.1.2 Chipset (945GME)
Memory Intel 945GME GMCH Supports
4 GB maximum memory
Two 64-bit wide DDR2 SDRAM data channel
Support DDR2, DDR2 533, and DDR2 667
256-Mb, 512-Mb and 1-Gb DDR2 technology
Only x8, x16 DDR2 devices with 4 or 8 banks
Support for DDR2 On-Die Termination (ODT)
Socket:
SO-DIMM Socket:
1. 200 pin SO-DIMM socket type *2
Graphic and Video
Controllers Intel 945GME GMCH Supports
150 MHz core clock at 1.05 V core voltage
400 MHz Integrated RAMDAC
Two SDVO ports multiplexed with PCI Express graphic
interface
Dual Channel LVDS interface support 36 bits
TV-Out has three integrated 10bit DACS with HDTV
support (480p/720p/1080i/1080p) cable
CRT monitor resolutions supported:
Supports up to QXGA(2048x1536)
LVDS panel resolution supported:
SupportsuptoUXGA(1600x1200)
Dual independent display options with digital display

PCM-9590 User Manual 4
1.3.1.3 Chipset (ICH7M)
IDE Interface ICH7M Supports
Single, independent IDE signal channel
Supports up to two IDE devices with independent timings
Ultra ATA/100/66/33 and PIO modes
IDE Primary Connector:
40 pins 2.54 mm Box Header
H.D. Codec
ALC883 I/F ICH7M Supports
Support for three AC’97 2.3 codes
Independent bus master logic for 8 channels
Supports up to six channels of PCM audio output
PCI functions for audio and modem
Concurrent PCI Bus
Controller PCI-104+: ICH7M chip supports:
PCI 2.1 compliant
32-bit 3.3 V 33 MHz PCI interface with 5 V tolerant inputs
Supports PC/PCI DMA
SATA Connector ICH7M Supports
Supports independent DMA operation on two ports
Operation of AHCI using memory space
Supports several optional sections of the Serial ATA
SATA connecters.
Connecter: Serial ATA 7 pins 1.27 mm x 2
USB Interface ICH7M Supports
Supports 8 USB2.0 ports which are high-speed, full-
speed, and low-speed capable
Port-routing logic determines whether a USB port is con-
trolled by UHCI or EHCI
Power Management ICH7M Supports
Fully supports ACPI (Advanced Configuration and Power
Interface) 2.0
Supports Suspend to System Memory (S3), and Soft Off
(S5)
PCI CLKRUN# and PME# support
SMI# (System Management Interrupt ) generation
Thermal Alarm (THRM#) SLP_S3# SLP_S5# are con-
nected to SIO
BIOS ICH7M support
Phoenix 4 M bit Flash BIOS, supports Plug & Play, APM 1.2/ACPI
1.1
FWH Type
Socket: 32 pin PLCC socket

5 PCM-9590 User Manual
Chapter 1 General Introduction
1.3.1.4 Others (chipset)
Serial ports SMSC3114 (LPC Super I/O) supports.
4 full function serial ports. High Speed NS16C550A
Compatible UARTs with Data rates to 1.5 Mbps
Support IRQ Sharing among serial ports
RS-485 Auto Direction Control Mode
Connectors: 40 pins 2.0 mm 20 X 2 Box Header
–COM1 (RS-232)
–COM2 (RS-232/422/485 with auto-flow control)
–COM3 ~ 4 (RS-232)
Thermal sensor SMSC3114 (LPC Super I/O) supports
Parallel port SMSC3114 (LPC Super I/O) supports
One Parallel Port
SPP/EPP (1.7,1.9)/ECP (IEEE 1284 Compliant) mode
Connector: 26 pins 2.0 mm Box header
Keyboard/Mouse
connectors SMSC3114 supports PS/2 Keyboard and Mouse interface
Connector: 1X 6 Pins Wafer Box
LAN ICH7M Support integrated 10/100 and 82573L Gigabit
LAN Use Intel 82573L LAN chipset Connecter:
–G: Box header 5*2P (M) 2.00 mm, Pin header 4*2P
(M) 2.00 mm
–M: Box header 5*2P (M) 2.00 mm
GPIO PCA9554 supports:
SMbus expansion
16 I/O Pins
5 V tolerance I/Os
Fan SMSC3114 supports:
Programmable automatic fan control based on temperature
System FAN Power Connector x 1
It should be added near by the CPU socket
Connector type: 2.0 mm Wafer box 3 x 1
Default is +12 V Fan
–Pin1: GND
–Pin2: +12 V
–Pin3: Fan speed signal input

PCM-9590 User Manual 6
1.3.2 Mechanical Spec.
1.3.2.1 Dimension (mm)
203 mm (L) * 146 mm (W)
1.3.2.2 Height on Top (mm)
29.3 mm (with Heatsink), 27 mm (with FAN cooler)
1.3.2.3 Height on Bottom (mm)
9.2 mm (memory socket)
1.3.2.4 Heatsink Dimension (mm)
L50 mm * W50 mm * H24.7 mm (Heatsink)
1.3.2.5 Weight (g) with Heatsink
345 g (Heat sink)
1.3.3 Electrical Spec.
1.3.3.1 Power supply Voltage
Voltage requirement with ATX Power:
–+5 V DC +/- 5%
–+5 V DC Standby +/- 5%
–+12 V DC (For PCI Card, FAN power, and LVDS inverter power, CPU core
power)
Voltage requirement with AT Power:
–+5 V DC +/- 5%
–+12 V DC (For PCI Card, FAN power, and LVDS inverter power, CPU core
power)
Please use cables as below if your power supply have no following cable type.
In ATX mode
ATX-20P(M) /12P(F) 10CM
(connector: CN21) p/n:1700000265
In AT mode
AT Power Cable 6*2P to 10*2P 10 cm
(connector: CN21) p/n:1700006200 (cable optional)

7 PCM-9590 User Manual
Chapter 1 General Introduction
1.3.3.2 Power supply Current
1.3.3.3 RTC Battery
Typical Voltage: 3.0 V
Normal discharge capacity: 220 (190) mAh
CPU Type Status +5 V +12 V +5 V +12 V +5 V +12 V
512MB/533 1G/533/Kingston 1G*2/533/Transcend
T7400
2.16GHz
FSB=667
L2=4M
BIOS Picture 1.07 A 1.99 A 1.22 A 1.96 A
DOS Idle 0.9 A 1.99 A 1.02 A 2.01 A
Win Idle 0.96 A 0.81 A 1.13 A 0.81 A
Win HCT11.2 1.03 A 2.09 A 1.34 A 2.08 A
Intel TAT 100% 0.99 A 3.75 A 1.15 A 4.05 A
CPU Type Status +5 V +12 V +5 V +12 V +5 V +12 V
1G/533/Kingston 1G*2/533/Transcend
T2500
2.00GHz
FSB=667
L2=2M
BIOS Picture 1.06 A 1.88 A 1.19 A 1.87 A
DOS Idle 0.91 A 1.93 A 1.02 A 1.89 A
Win Idle 0.99 A 0.92 A 1.17 A 0.88 A
Win HCT11.2 1.06 A 1.93 A 1.34 A 1.95 A
Intel TAT 100% 0.97 A 3.01 A 1.18 A 2.99 A
CPU Type Status +5 V +12 V +5 V +12 V +5 V +12 V
1G/533/Kingston 1G*2/533/Transcend
L2400
1.66GHz
FSB=667
L2=2M
BIOS Picture 1.03 A 1.16 A 1.22 A 1.17 A
DOS Idle 0.88 A 1.18 A 1.06 A 1.19 A
Win Idle 0.98 A 0.77 A 1.26 A 0.75 A
Win HCT11.2 1.05 A 1.21 A 1.34 A 1.21 A
Intel TAT 100% 1.01 A 1.91 A 1.26 A 1.87 A
CPU Type Status +5 V +12 V +5 V +12 V +5 V +12 V
1G/533/Kingston 1G*2/533/Transcend
U2500
1.2GHz
FSB=533
L2=2M
BIOS Picture 1.04 A 0.96 A 1.19 A 0.94 A
DOS Idle 0.89 A 0.96 A 1.02 A 0.94 A
Win Idle 1.01 A 0.76 A 1.26 A 0.75 A
Win HCT11.2 1.05 A 0.98 A 1.34 A 0.99 A
Intel TAT 100% 1.02 A 1.38 A 1.27 A 1.34 A

PCM-9590 User Manual 8
1.3.4 Environmental Spec.
1.3.4.1 Operating temperature
The Intel® Core Duo CPU® is specified for proper operation when the junction tem-
perature is within the specified range of 0°C to 100°C.
The Intel® 945GME chipset temperature runs at a maximum of 99°C. The Intel®
ICH7M I/O Controller case temperature runs at a maximum of 99°C.
The processor protects itself from catastrophic overheating by use of an internal ther-
mal sensor at a temperature level of approximately 100°C.
Operating temperature: 0 ~ 60°C (32 ~ 140°F)
1.3.4.2 Operating Humidity
Operating Humidity: 0% ~ 90% Relative Humidity, non-condensing
1.3.4.3 Storage temperature
Standard products (0 ~ 60°C)
Storage temperature: -20 ~ 70°C
Phoenix products (-20 ~ 80°C)
Storage temperature: -20 ~ 80°C
Platinum Phoenix products (-40 ~ 85°C)
Storage temperature: -40 ~ 85°C
1.3.4.4 Storage relative Humidity
Standard products (0 ~ 60°C)
Relative humidity: 95% @ 60°C
Phoenix products (-20 ~ 80°C)
Relative humidity: 95% @ 60°C
Platinum Phoenix products (-40 ~ 85°C)
Relative humidity: 95% @ 60°C

Chapter 2
2H/W Installation
This chapter explains the setup
procedures of the PCM-9590 hard-
ware, including instructions on
setting jumpers and connecting
peripherals, switches, indicators
and mechanical drawings. Be sure
to read all safety precautions
before you begin the installation
procedure.

PCM-9590 User Manual 10
2.1 Jumpers
2.1.1 Jumper list
2.1.2 Jumper Settings
J1: LVDS1 panel power
J2: PC104+ VIO Selection
J3: COM2 function option
J4: Clear CMOS function
J5: LVDS2 panel power
J6: AT Power Solution
Table 2.1: J1
J1 LVDS1 panel power
PIN HEADER 3*1P 2.0 mm
Setting Function
1-2 +5 V (Default)
2-3 +3.3 V
Table 2.2: J2
J2 PC104+ VIO Selection
PIN HEADER 3*1P 2.54 mm
Setting Function
1-2 VIO = + 5 V (Default)
2-3 VIO = +3.3 V
Table 2.3: J3
J3 COM2 function option
PIN HEADER SMD 5*2P 180D(M) 2.0 mm
Setting Function
1-2 RS232 (Default)
2-3 RS485
5-6 RS422