Advantech SmartMotion ST352 User manual

Twin Cellular Module Router
SmartMotion ST352
USER MANUAL
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
Advantech B+B SmartWorx – Americas
Advantech B+B SmartWorx
707 Dayton Road
Ottawa, IL 61350 USA
Website
www.advantech-bb.com
Advantech B+B SmartWorx – Europe
Advantech B+B SmartWorx s.r.o.
Sokolska 71
562 04, Usti nad Orlici,
Czech Republic
Website
www.advantech-bb.com
c
2019 Advantech B+B SmartWorx s.r.o. No part of this publication may be reproduced or transmitted in any
form or by any means, electronic or mechanical, including photography, recording, or any information storage and
retrieval system without written consent. Information in this manual is subject to change without notice, and does
not represent a commitment on the part of Advantech B+B SmartWorx.
Advantech B+B SmartWorx s.r.o. shall not be liable for incidental or consequential damages resulting from
the furnishing, performance, or use of this manual.
All brand names used in this manual are the registered trademarks of their respective owners. The use of
trademarks or other designations in this publication is for reference purposes only and does not constitute an
endorsement by the trademark holder.
i
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
Used symbols
Danger – Information regarding user safety or potential damage to the router.
Attention – Problems that can arise in specific situations.
Information, notice – Useful tips or information of special interest.
GPL licence
Source codes under GPL licence are available free of charge by sending an email to:
[email protected].
Please see http://ep.advantech-bb.cz/devzone for more information.
Advantech B+B SmartWorx s.r.o., Sokolska 71, 562 04 Usti nad Orlici, Czech Republic
Document No. MAN-0011-EN, revision from April 12, 2019. Released in the Czech Republic.
ii
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
Contents
1 Safety Instructions 2
2 WEEE directive 3
3 Router Description 4
3.1 Usage of the Router ................................. 5
4 Contents of Package 8
5 Router Design 9
5.1 Router versions .................................... 9
5.2 Delivery identification ................................ 9
5.3 Order codes ...................................... 10
5.4 Basic dimensions of the router box ......................... 12
5.5 Mounting recommendations ............................. 12
5.6 Removal from the DIN rail .............................. 13
5.7 Description of the rear panel ............................. 14
5.8 Description of the front panel ............................ 14
5.8.1 Status indication ............................... 15
5.8.2 Power connector PWR ............................ 16
5.8.3 Antenna connector ANT, DIV, GPS and WiFi ............... 17
5.8.4 SIM card reader ............................... 18
5.8.5 MicroSD card reader ............................. 19
5.8.6 Ethernet Ports (ETH0 and ETH1) ...................... 20
5.8.7 Power over Ethernet (PoE) ......................... 21
5.8.8 USB Port ................................... 23
5.8.9 I/O Port .................................... 24
5.8.10 Reset ..................................... 26
6 First Use 27
6.1 Connecting the router before first use ....................... 27
6.2 Start .......................................... 28
6.3 Configuration ..................................... 28
6.3.1 Configuration over web browser ....................... 28
7 Technical Parameters 30
7.1 Basic parameters ................................... 30
7.2 Standards and regulations .............................. 31
iii
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
7.3 Type tests and environmental conditions ...................... 32
7.4 Technical parameters of both of cellular modules ................. 33
7.5 Technical parameters of GPS ............................ 34
7.6 Technical parameters of WiFi ............................ 35
7.7 Technical parameters of I/O port .......................... 35
7.8 Technical Parameters of Power over Ethernet (PoE) ............... 36
7.9 Other Technical Parameters ............................. 36
8 Recommended Literature 37
9 Troubleshooting 38
9.1 FAQ .......................................... 38
10 Customers Support 41
10.1 Customer Support for NAM ............................. 41
10.2 Customer Support for Europe ............................ 41
10.3 Customer Support for Asia ............................. 41
iv
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
List of Figures
1 Access to the Internet from LAN .......................... 5
2 Backed up access to the Internet .......................... 6
3 Using VPN tunnel .................................. 6
4 Serial Gateway .................................... 7
5 Contents of package ................................. 8
6 Basic version ..................................... 9
7 Version with WiFi module .............................. 9
8 Label example .................................... 9
9 Basic dimensions of the router box ......................... 12
10 Default position of metal DIN rail clip ........................ 13
11 Removal from the DIN rail .............................. 13
12 SmartMotion front panel ............................... 14
13 Power connector ................................... 16
14 Connection of power supply ............................. 16
15 Connecting of the antenna .............................. 17
16 SIM cards ....................................... 18
17 MicroSD card ..................................... 19
18 Ethernet connector .................................. 20
19 Connection of Ethernet cable ............................ 20
20 PoE PD usage .................................... 21
21 PoE PSE usage ................................... 22
22 USB connector .................................... 23
23 I/O connector ..................................... 24
24 Binary inputs connection ............................... 25
25 Binary output connection .............................. 25
26 Router reset ...................................... 26
27 Router connection .................................. 27
28 Entering the IP address of the router ........................ 28
29 Entering login information .............................. 28
30 Router web interface ................................. 29
v
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
List of Tables
1 Router versions .................................... 9
2 Delivery identification ................................ 9
3 Order codes overview ................................ 10
4 Power over Ethernet ................................. 10
5 Type of router box .................................. 10
6 Type of power supply ................................. 10
7 Examples of order code ............................... 11
8 Front panel description ................................ 14
9 Status indication ................................... 15
10 Connection of power connector ........................... 16
11 Technical specifications of microSD card ...................... 19
12 Connection of Ethernet connector .......................... 20
13 Insulation strength of Ethernet ports ........................ 20
14 Connection of USB connector ............................ 23
15 Connection of I/O port ................................ 24
16 Characteristics of inputs ............................... 24
17 Description of router reset and restart ....................... 26
18 Basic parameters ................................... 30
19 Standards and regulations .............................. 31
20 Type tests and environmental conditions ...................... 32
21 Technical parameters of both of cellular modules ................. 33
22 Technical parameters of GPS ............................ 34
23 Technical parameters of WiFi ............................ 35
24 Characteristics of inputs ............................... 35
25 PoE PD: parameters for opposite PSE ....................... 36
26 PoE PSE parameters ................................ 36
27 Other technical parameters ............................. 36
1
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
1. Safety Instructions
Please, observe the following instructions:
•The router must be used in compliance with all applicable international and national laws
and in compliance with any special restrictions regulating the utilization of the router in
prescribed applications and environments.
•To prevent possible injury and damage to appliances and to ensure compliance with
all relevant provisions, use only the original accessories. Unauthorized modifications or
the use of unapproved accessories may result in damage to the router and / or a breach
of applicable regulations. Unauthorized modifications or use of unapproved accessories
may void the warranty.
•The router can not be opened.
•Turn off the router and disconnect it from power supply before handling the SIM card.
•Caution! The SIM card could be swallowed by small children.
•Power supply must not exceed 60 V DC max.
•Do not expose the router to extreme ambient conditions. Protect the router against dust,
moisture and high temperature.
•Only routers with appropriate certification and labelling should be used in locations where
flammable and explosive materials are present, including gas stations, chemical plants,
or locations in which explosives are used. We remind users of the duty to observe the
restrictions concerning the utilization of radio devices at such places.
•Switch off the router when travelling by plane. Utilization of the router on a plane may
endanger the operation of the plane or interfere with the mobile telephone network, and
may be unlawful. Failure to observe these instructions may result in the suspension or
cancellation of telephone services for the respective client and / or may result in legal
sanctions.
•When using the router in close proximity to personal medical devices, such as cardiac
pacemakers or hearing aids, you must proceed with heightened caution.
•The router may cause interference when used in close proximity to TV sets, radio re-
ceivers or personal computers.
•It is recommended that you create an appropriate copy or backup of all important settings
that are stored in the memory of the device.
2
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
2. Product Disposal Instructions
The WEEE (Waste Electrical and Electronic Equipment: 2012/19/EU) directive was in-
troduced to ensure that electrical/electronic products are recycled using the best available
recovery techniques in order to minimize impact on the environment. This product contains
high quality materials and components which can be recycled. At the end of it’s life this pro-
duct MUST NOT be mixed with other commercial waste for disposal. The device contains the
battery. Remove the battery from the device before disposal. The battery in the device needs
to be disposed apart accordingly. Check the terms and conditions of your supplier for disposal
information.
3
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
3. Router Description
SmartMotion ST352 is an industrial cellular router intended for wireless communication in
mobile networks that make use of LTE, HSPA+, UMTS, CDMA, EDGE or GPRS technology.
The router is equipped with two independent cellular modules for backed up communication.
That’s why SmartMotion router is the ideal solution for the systems with high reliability needed.
The position of the first module is reserved for LTE technology with frequency bands 800,
900, 1800, 2100 and 2600 MHz. The second position is equipped with a module supporting
LTE technology with the same frequency bands. Due to the high speed of data transfer and
the previously mentioned high reliability of communication is this router an ideal solution for
specialized M2M devices and IoT as well as for wireless connection of traffic and security
camera systems, individual computers, LAN networks, automatic teller machines (ATM) and
other self-service terminals.
The standard configuration includes two Ethernet 10/100 ports, one USB 2.0 Host port,
two binary inputs and one output (I/O connector). The device also has four readers for 3 V and
1.8 V SIM cards, which are located on the rear panel of the router. The router also includes
a microSD card port that supports up to 64 GB card storage (32 GB in the case of SDHC
cards). The router can be equipped with a WiFi module, but this must be part of the initial
configuration – it cannot be added to the router at some point in the future. The router can be
equipped with PoE PD (Power over Ethernet – Powered Device), which allows the router to be
powered via Ethernet. It can also be equipped with PoE PSE (Power over Ethernet – Power
Source Equipment), which lets the router power other devices via Ethernet.
Configuration of the router may be done via a password-protected Web interface. Web in-
terface provides detailed statistics about the router’s activities, signal strength, detailed system
log etc. The router supports the creation of VPN tunnels using IPSec, OpenVPN and L2TP
to ensure safe communication. DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS,
backup primary connection and many other functions are supported.
The router provides diagnostic functions which include automatically monitoring the PPP
connection, automatic restart in case of connection losses, and a hardware watchdog that
monitors the router status. The user may insert Linux scripts which are started on various
actions. It is possible to create up to four different configurations for the same router. These
configurations can be switched whenever necessary via Web interface, SMS or binary input
status. The router can automatically upgrade its configuration and firmware from your central
server. This allows for mass reconfiguration of numerous routers at the same time.
The router also supports additional software like R-SeeNet for permanent traffic monitoring
of routers.
4
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
Examples of possible applications
•mobile office
•fleet management
•security system
•telematic
•telemetric
•remote monitoring
•vending and dispatcher machines
3.1 Usage of the Router
The router is primarily intended for these four basic situations:
I. Access to the Internet from LAN
Figure 1: Access to the Internet from LAN
5
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
II. Backed up access to the Internet (from LAN)
Figure 2: Backed up access to the Internet
III. Secure networks interconnection or using VPN
Figure 3: Using VPN tunnel
6
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
IV. Serial Gateway
Figure 4: Serial Gateway
7
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
4. Contents of Package
Basic delivered set of router includes:
•Router,
•Power supply,
•Crossover UTP cable,
•Up to five external antennas,
–4x Terminal antenna for standard LTE
–1x WiFi antenna (if router contains WiFi module)
•Loose power and I/O connector (+8 pins1),
•Clip for the DIN rail,
•Paper start guide.
Figure 5: Contents of package
Temperature range for power supply is reduced to 0 ◦C to +40 ◦C!
1These pins are designed for cables with a diameter from 0.2 to 0.8 mm2
8
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
5. Router Design
5.1 Router versions
SmartMotion ST352 router is supplied in the following versions (see table below). All ver-
sions are available in a metal box. All versions are available with PoE PD (Power over Ethernet
– powered device) so you can power the router from both ETH0 and ETH1 interfaces, or with
PoE PSE (power source equipment) so you can power other devices by the router.
Router versions
SIM
BIN
BOUT
USB
SD
ETH
WiFi
Basic version 4x2x1x1x1x2x
Version with WiFi module 4x2x1x1x1x2x1x
Table 1: Router versions
Figure 6: Basic version Figure 7: Version with WiFi module
5.2 Delivery identification
Trade name Type name Description
SmartMotion ST352 SmartMotion Router in a metal box
Table 2: Delivery identification
Figure 8: Label example
9
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
5.3 Order codes
Order codes overview is shown in the table below.
Product Name Order code Features – interfaces
ST352 BB-ST3520x0yz∗2x LTE module, 2x ETH, 1x USB, 2x BI, 1x BO, 1x
microSD reader, 4x SIM reader
ST352 BB-ST3521x0yz∗2x LTE module, 2x ETH, 1x USB, 2x BI, 1x BO, 1x
microSD reader, 4x SIM reader, WiFi
Table 3: Order codes overview
∗Replace the letters "x", "y" and "z" with the values from the following tables:
Letter "x" – Power over Ethernet (PoE)
Power over Ethernet (PoE) Number "x" in code
Version without PoE 0
PoE PSE – Power Source Equipment – powers other devices 8
PoE PD – Powered Device – can be powered via Ethernet 9
Table 4: Power over Ethernet
Letter "y" – type of the router box
Type of box Number "y" in code
Metal 2
Table 5: Type of router box
Letter "z" – type of the power supply connector
Type of power supply Number "z" in code
International (4 plugs) 5
Without accessories 0
Table 6: Type of power supply
10
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
Examples of complete order code:
Order code Features – interfaces BoxPower supply
BB-ST35208020 2x LTE module, 2x ETH, 1x USB, 2x BI, 1x
BO, 1x microSD reader, 4x SIM reader, PoE
PSE
metal none
BB-ST35219020 2x LTE module, 2x ETH, 1x USB, 2x BI, 1x
BO, 1x microSD reader, 4x SIM reader, WiFi,
PoE PD
metal none
BB-ST35210020 2x LTE module, 2x ETH, 1x USB, 2x BI, 1x
BO, 1x microSD reader, 4x SIM reader, WiFi
metal none
Table 7: Examples of order code
You can use the order codes configurator on the www.bb-smartcellular.eu web pages.
11
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
5.4 Basic dimensions of the router box
Figure 9: Basic dimensions of the router box
5.5 Mounting recommendations
•Possibility to be put on a work surface,
•DIN rail EN 60715 with included metal clip.
For the most of applications with a built-in router in a switch board it is possible to recognize
two kinds of environments:
•No public and industry environment of low voltage with high interference,
•Public environment of low voltage without high interference.
For both of these environments it is possible to mount router to a switch board, the following
there is no need to have examination immunity or issues in connection with EMC according to
EN 61439-1:2011.
Attention: If the negative pole of the router is grounded, there is no protection against
reversed polarity!
Compliance of EN 61439-1:2011 specification it is necessary to observe next assembly
of the router to the switch – board:
•For whip antennas we recommend to observe a distance of 6 cm from cables and metal
surfaces on every side due to the elimination of interference. While using an external
antenna except for the switch-board it is necessary to fit a lightening conductor.
•Before mounting a router on sheet-steel we recommend using a "cable" antenna.
•For every cables we recommend to bind the bunch, we recommend for this use:
12
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
–Length of the bunch (combination of power supply and data cables) can be maxi-
mum 1.5 m. If the length of data cables exceeds 1.5 m or in the event of, the cable
leads towards the switch – board. We recommend installing over – voltage protec-
tors (surge suppressors).
–With data cables they mustn’t carry cables with reticular tension ∼230 V/50 Hz.
•Sufficient space must be left before individual connectors for handling of cables,
•For correct function of the router we recommend to use in the switch-board earth-bonding
distribution frame for grounding of power supply of router, data cables and antenna.
5.6 Removal from the DIN rail
The DIN rail clip is suitable for a DIN rail according to EN 60715 standard only. The default
position of metal rail clip, which is used for mounting the router on a DIN rail, is shown in
the following figure. Its position can be changed on some models (back or bottom). When
changing the position of the DIN rail clip, tighten the screws with max. 0.4 Nm torque.
Figure 10: Default position of metal DIN rail clip
To remove the router from the DIN rail, push the router down lightly, so the bottom part of
the DIN rail clip (hitched to the DIN rail) gets out of the rail and then pull out the bottom part of
the router away from the DIN rail.
Figure 11: Removal from the DIN rail
13
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de

SmartMotion ST352
5.7 Description of the rear panel
The rear panel contains only four SIM cards readers (SIM1,SIM2,SIM3 and SIM4), mi-
croSD card reader (SD) and RST button used to restore default configuration and reboot the
SmartMotion router.
5.8 Description of the front panel
On the front panel is the following:
Caption Connector Description
PWR 2-pin Connector for the power supply
ETH0 RJ45 Connector for connection into the computer network, PoE (only
for PoE PSE or PoE PD versions)
ETH1 RJ45 Connector for connection into the computer network, PoE (only
for PoE PSE or PoE PD versions)
ANT 2x SMA Connector for main antenna
DIV 2x SMA Connector for diversity antenna
GPS SMA Connector for GPS antenna
WiFi R-SMA Connector for WiFi antenna (only for versions with WiFi
module!)
USB USB-A 2.0
Host
Connector for connection of USB devices to the router. Sup-
ports devices with PL-2303 and FTDI USB/RS232 converters.
I/O 6-pin Connector for connection of the binary inputs and output
Table 8: Front panel description
Figure 12: SmartMotion front panel
14
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: [phone] — E-Mail: [email protected] — www.lucom.de
www.lucom.de